BPG is committed to discovery and dissemination of knowledge
Cited by in CrossRef
Number Cited Articles
Lorenza Mattei, Francesca Di Puccio, Thomas J. Joyce, Enrico Ciulli. Numerical and experimental investigations for the evaluation of the wear coefficient of reverse total shoulder prosthesesJournal of the Mechanical Behavior of Biomedical Materials 2016; 55: 53 doi: 10.1016/j.jmbbm.2015.10.007
Göksu Kandemir, Simon Smith, Thomas J. Joyce. Wear behaviour of CFR PEEK articulated against CoCr under varying contact stresses: Low wear of CFR PEEK negated by wear of the CoCr counterfaceJournal of the Mechanical Behavior of Biomedical Materials 2019; 97: 117 doi: 10.1016/j.jmbbm.2019.05.022
Hamidreza Farhoudi, Reza Oskouei, Ali Pasha Zanoosi, Claire Jones, Mark Taylor. An Analytical Calculation of Frictional and Bending Moments at the Head-Neck Interface of Hip Joint Implants during Different Physiological ActivitiesMaterials 2016; 9(12): 982 doi: 10.3390/ma9120982
Philipp G. Grützmacher, Andreas Rosenkranz, Adam Szurdak, Florian König, Georg Jacobs, Gerhard Hirt, Frank Mücklich. From lab to application - Improved frictional performance of journal bearings induced by single- and multi-scale surface patternsTribology International 2018; 127: 500 doi: 10.1016/j.triboint.2018.06.036
Qingen Meng, Jing Wang, Peiran Yang, Zhongmin Jin, John Fisher. The lubrication performance of the ceramic-on-ceramic hip implant under starved conditionsJournal of the Mechanical Behavior of Biomedical Materials 2015; 50: 70 doi: 10.1016/j.jmbbm.2015.06.001
Young-Kyun Lee, Byung-Ho Yoon, Yun Seong Choi, Woo-Lam Jo, Yong-Chan Ha, Kyung-Hoi Koo. Metal on Metal or Ceramic on Ceramic for Cementless Total Hip Arthroplasty: A Meta-AnalysisThe Journal of Arthroplasty 2016; 31(11): 2637 doi: 10.1016/j.arth.2016.04.014
Juan-Carlos Baena, Zhongxiao Peng. Dispersion state of multi-walled carbon nanotubes in the UHMWPE matrix: Effects on the tribological and mechanical responsePolymer Testing 2018; 71: 125 doi: 10.1016/j.polymertesting.2018.08.023
Göksu Kandemir, Simon Smith, Thomas J Joyce. The influence of contact stress on the wear of cross-linked polyethyleneProceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 2018; 232(10): 1008 doi: 10.1177/0954411918796047
B. Sh. Minasov, R. R. Yakupov, L. Sh. Shuster, S. V. Chertovskikh, I. I. Emaev, G. N. Filimonov, A. A. Korshunov, T. E. Khairov. Comparative Study of the Adhesive Component of Friction in Hip EndoprosthesesVestnik travmatologii i ortopedii imeni N.N. Priorova 2016; (1): 71 doi: 10.32414/0869-8678-2016-1-71-75
K.N. Chethan, B. Satish Shenoy, N. Shyamasunder Bhat. Role of different orthopedic biomaterials on wear of hip joint prosthesis: A reviewMaterials Today: Proceedings 2018; 5(10): 20827 doi: 10.1016/j.matpr.2018.06.468
Cong-Truyen Duong, Cong-Dat Le, Duc-Nam Nguyen. 7th International Conference on the Development of Biomedical Engineering in Vietnam (BME7)IFMBE Proceedings 2020; 69: 247 doi: 10.1007/978-981-13-5859-3_45
G. M. Eremina, A. Yu. Smolin. Numerical modeling of the mechanical behavior of hip resurfacing endoprosthesis and healthy bonePROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES 2019 2019; 2167: 020087 doi: 10.1063/1.5131954
Paul F. Lachiewicz, Lindsay T. Kleeman, Thorsten Seyler. Bearing Surfaces for Total Hip ArthroplastyJournal of the American Academy of Orthopaedic Surgeons 2018; 26(2): 45 doi: 10.5435/JAAOS-D-15-00754
Lorenza Mattei, Francesca Di Puccio, Enrico Ciulli, Andreas Pauschitz. Experimental investigation on wear map evolution of ceramic-on-UHMWPE hip prosthesisTribology International 2020; 143: 106068 doi: 10.1016/j.triboint.2019.106068
João Costa, Joaquim Peixoto, Pedro Moreira, António Pedro Souto, Paulo Flores, Hamid M. Lankarani. Influence of the Hip Joint Modeling Approaches on the Kinematics of Human GaitJournal of Tribology 2016; 138(3) doi: 10.1115/1.4031988
S. J. Bull, N. Moharrami, D. Langton. Mechanistic Study of the Wear of Ceramic Heads by Metallic Stems in Modular ImplantsJournal of Bio- and Tribo-Corrosion 2017; 3(1) doi: 10.1007/s40735-016-0066-8
M. Berni, G. Marchiori, A. Gambardella, M. Boi, M. Bianchi, A. Russo, A. Visani, M. Marcacci, P.G. Pavan, N.F. Lopomo. Effects of working gas pressure on zirconium dioxide thin film prepared by pulsed plasma deposition: roughness, wettability, friction and wear characteristicsJournal of the Mechanical Behavior of Biomedical Materials 2017; 72: 200 doi: 10.1016/j.jmbbm.2017.05.006
Huizhen Zhang, Gang Cheng, Xianlei Shan, Feng Guo. Kinematic accuracy research of 2(3HUS+S) parallel manipulator for simulation of hip joint motionRobotica 2018; 36(9): 1386 doi: 10.1017/S0263574718000073
David Nečas, Hatsuhiko Usami, Tatsuya Niimi, Yoshinori Sawae, Ivan Křupka, Martin Hartl. Running-in friction of hip joint replacements can be significantly reduced: The effect of surface-textured acetabular cupFriction 2020;  doi: 10.1007/s40544-019-0351-x
Juan-Carlos Baena, Zhongxiao Peng. Mechanical and tribological performance of UHMWPE influenced by temperature changePolymer Testing 2017; 62: 102 doi: 10.1016/j.polymertesting.2017.06.017
J Jamari, E Saputra, I B Anwar, R Ismail, E V D Heide. Finite Element Study of the Effect of UHMWPE Liner Thickness on the Contact Area and Stress Distribution in a Bipolar Hip JointIOP Conference Series: Materials Science and Engineering 2017; 202: 012095 doi: 10.1088/1757-899X/202/1/012095
Kristin M. Warren, Md. Mydul Islam, Philip R. LeDuc, Robert Steward. 2D and 3D Mechanobiology in Human and Nonhuman SystemsACS Applied Materials & Interfaces 2016; 8(34): 21869 doi: 10.1021/acsami.5b12064
Eko Saputra, Iwan Budiwan Anwar, Rifky Ismail, J. Jamari, Emile van der Heide. Study of Unipolar and Bipolar Hip Prostheses Using Finite Element Simulation: Contact Stress AnalysisKey Engineering Materials 2017; 739: 96 doi: 10.4028/www.scientific.net/KEM.739.96
V. Peretti, S. Ferraris, G. Gautier, C. Hellmich, O. Lahayne, B. Stella, S. Yamaguchi, S. Spriano. Surface treatments for boriding of Ti6Al4V alloy in view of applications as a biomaterialTribology International 2018; 126: 21 doi: 10.1016/j.triboint.2018.05.006
Ehsan Askari, Michael S. Andersen. A dynamic model of polyethylene damage in dry total hip arthroplasties: wear and creepMultibody System Dynamics 2019; 45(4): 403 doi: 10.1007/s11044-018-09652-2
Alessandro Ruggiero, Massimiliano Merola, Saverio Affatato. Finite Element Simulations of Hard-On-Soft Hip Joint Prosthesis Accounting for Dynamic Loads Calculated from a Musculoskeletal Model during WalkingMaterials 2018; 11(4): 574 doi: 10.3390/ma11040574
Huizhen Zhang, Gang Cheng, Xianlei Shan, Yang Li. Singularity-free path optimization of the parallel test mechanism for artificial hip jointsJournal of Mechanical Science and Technology 2018; 32(4): 1775 doi: 10.1007/s12206-018-0334-2
Effects of femoral head diameter on the predicted acetabular cup wear volume of CP-Ti and UHMWPE hip implantsJournal of Physics: Conference Series 2019; 1218: 012012 doi: 10.1088/1742-6596/1218/1/012012
A. C. Messellek, M. Ould Ouali, Y. Benabid, A. Amrouche, A. Beloulla. Design optimization and material selection of acetabular component of hip prosthesis using computational conceptsComputer Methods in Biomechanics and Biomedical Engineering 2017; 20(sup1): S131 doi: 10.1080/10255842.2017.1382896
M. Kalayarasan, S. Shankar, M. Manikandan, K. Adithan. Mechanical loading characteristics of total hip prosthetics subjected to dynamic loading cyclesBio-Medical Materials and Engineering 2018; 29(6): 723 doi: 10.3233/BME-181019
C.L. Lebudi, R.R. Phiri, T Leso, O.P. Oladijo. Effect of Heat Treatment Hardening on the Dry Sliding Wear Behaviour of Mild SteelMRS Advances 2020; 5(23-24): 1195 doi: 10.1557/adv.2020.72
Enrico De Pieri, Federica Atzori, Stephen J Ferguson, Sebastian Dendorfer, Michael Leunig, Martin Aepli. Contact force path in total hip arthroplasty: effect of cup medialisation in a whole-body simulationHIP International 2020; : 112070002091732 doi: 10.1177/1120700020917321
D. Nečas, M. Vrbka, F. Urban, J. Gallo, I. Křupka, M. Hartl. In situ observation of lubricant film formation in THR considering real conformity: The effect of diameter, clearance and materialJournal of the Mechanical Behavior of Biomedical Materials 2017; 69: 66 doi: 10.1016/j.jmbbm.2016.12.018
V. Peretti, A. Bari, S. Ferraris, G. Gautier, B. Stella, A. M. Tortora, S. Spriano. Proceedings of the 7th International Conference on Fracture Fatigue and WearLecture Notes in Mechanical Engineering 2019; : 719 doi: 10.1007/978-981-13-0411-8_64
Ehsan Askari, Michael S Andersen. A closed-form formulation for the conformal articulation of metal-on-polyethylene hip prostheses: Contact mechanics and sliding distanceProceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 2018; 232(12): 1196 doi: 10.1177/0954411918810044
Sanne van der Poel, Marek Mezera, Gert-willem Römer, Erik de Vries, Dave Matthews. Fabricating Laser-Induced Periodic Surface Structures on Medical Grade Cobalt–Chrome–Molybdenum: Tribological, Wetting and Leaching PropertiesLubricants 2019; 7(8): 70 doi: 10.3390/lubricants7080070
Dipankar Choudhury, Martin Vrbka, Azuddin Bin Mamat, Ian Stavness, Chanchal K. Roy, Rajshree Mootanah, Ivan Krupka. The impact of surface and geometry on coefficient of friction of artificial hip jointsJournal of the Mechanical Behavior of Biomedical Materials 2017; 72: 192 doi: 10.1016/j.jmbbm.2017.05.011
Asghar Shirani, Nicholas Nunn, Olga Shenderova, Eiji Osawa, Diana Berman. Nanodiamonds for improving lubrication of titanium surfaces in simulated body fluidCarbon 2019; 143: 890 doi: 10.1016/j.carbon.2018.12.005
Amit Aherwar, Amar Patnaik, Marjan Bahraminasab. Effect of Molybdenum Content on Structure and Properties of a Co-Cr Biomedical AlloyJournal of Materials Engineering and Performance 2019; 28(10): 6340 doi: 10.1007/s11665-019-04356-w
J. Gallo, E. Gibon, S.B. Goodman. Materials for Bone Disorders2017; : 119 doi: 10.1016/B978-0-12-802792-9.00004-5
Eric A. Lewallen, Dakota L. Jones, Amel Dudakovic, Roman Thaler, Christopher R. Paradise, Hilal M. Kremers, Matthew P. Abdel, Sanjeev Kakar, Allan B. Dietz, Robert C. Cohen, David G. Lewallen, Andre J. van Wijnen. Osteogenic potential of human adipose-tissue-derived mesenchymal stromal cells cultured on 3D-printed porous structured titaniumGene 2016; 581(2): 95 doi: 10.1016/j.gene.2016.01.015