There is a scarcity of evidence on occupational exposures that may increase eczema in adults. We aimed to investigate potential associations between occupational exposures and eczema in middle-aged adults.

A lifetime work history calendar was collected from the Tasmanian Longitudinal Health Study participants when they were at age 53. Their work history was collated with the occupational asthma-specific job exposure matrix to define ever-exposure and cumulative exposure unit-years since no eczema job exposure matrix is available. Eczema was determined using the report of flexural rash that was coming and going for at least 6 months in the last 12 months. Skin prick tests were used to further subgroup eczema and atopic eczema (AE) or non-AE (NAE). Logistic and multinomial regression models were used to investigate the associations.

Eczema prevalence was 9.1%. Current occupational exposure to animals (adjusted OR, aOR=3.06 (95% CI 1.43 to 6.58)), storage mites (aOR=2.96 (95% CI 1.38 to 6.34)) and endotoxin (aOR=1.95 (95% CI 1.04 to 3.64)) were associated with increased risk of current eczema. Furthermore, increased odds of NAE were associated with current exposure to animals (aOR=5.60 (95% CI 1.45 to 21.7)) and storage mites (aOR=5.63 (95% CI 1.45 to 21.9)). Current exposures to isocyanates (aOR=5.27 (95% CI 1.17 to 23.7)) and acrylates (aOR=8.41 (95% CI 1.60 to 44.3)) were associated with AE. There was no evidence of associations between cumulative exposures and eczema prevalence. Cumulative exposure to metalworking fluids (aOR=1.10 (95% CI 1.01 to 1.22)) was associated with NAE and acrylates (aOR=1.24 (95% CI 1.04 to 1.46)) with AE.

In this exploratory assessment, multiple occupational exposures were associated with current eczema in middle-aged adults. Raising awareness and limiting these exposures during an individual's productive working life will likely have various health benefits, including reducing eczema prevalence.

The aim of the study was to analyse microbiological characteristics and clinical manifestations of cardiac device-related infective endocarditis (CDRIE) in cardiac resynchronization therapy (CRT) recipients, and to compare the diagnostic value of modified Duke (MDC) versus modified Duke lead criteria (MDLC; including to MDC local infection and pulmonary infection or embolism as major criteria).

The study population comprised 765 consecutive CRT patients from a high-volume, tertiary care centre from 2002 to 2015. All patients were screened for CDRIE.

During a median follow-up of 1692 days (range: 457-3067) 5.36% of patients (n = 41) developed CDRIE, which was accompanied by CRT pocket infection in 17.1% (n = 7) and recurrent pulmonary infection or pulmonary embolism in 29.3% (n = 12). Fever was present in 95.1% of patients (n = 39), whereas blood cultures were positive in 65.9% (n = 27). Staphylococcus was the most prevalent pathogen in 59.3% (n = 16), Gram-negative bacteria in 25.9% (n = 7). Transoesophageal echocardiography showed intracardiac vegetations in 73.2% of patients (n = 30). Non-different pathogen types with the most common methicillin-sensitive Staphylococcus aureus were observed for early versus late CDRIE (endocarditis ≤ 6 vs. > 6 months from CRT or other device-related procedure). All 3 inflammatory markers (C-reactive protein, white blood cells, procalcitonin) were normal in 4.9% of patients (n = 2). MDC versus MDLC indicated definite CDRIE in 48.8% versus 80.5%, respectively (p = 0.003).

Fever is the most common symptom of CRT-related CDRIE, and transoesophageal echocardiography allows vegetations to be visualised in nearly 3/4 of patients with CDRIE. Although the most common pathogens were Staphylococci, Gram-negative bacteria accounted for a quarter of CDRIE. Modified Duke lead criteria proved superior to MDC.

Metalworkers are exposed to many sensitizing and irritant substances. There are no published data on contact allergy in this population in the Baltic countries.

To detect skin symptoms related to occupational exposure and to describe the reactivity pattern to the European baseline series in workers from two metal plants in Lithuania.

In this cross-sectional study 185 metalworkers (154 production workers and 31 office staff) filled an interviewer-administered questionnaire. Patch testing was performed in 135 metalworkers and office staff, as a control group.

Metalworkers younger than 40 years complained statistically significantly more often of skin symptoms, especially on the hands and face, than older workers. Physician-diagnosed skin diseases were reported in 1.7% of cases. Metalworkers, working <20 years in the factory, more often had skin symptoms. Contact with chemicals at the workplace was suspected as the main factor provoking skin symptoms. Metalworkers were sensitized mainly to cobalt, and nickel was the most prevalent allergen among office staff.

Younger metalworkers more often had skin symptoms suspected of being work-related compared to older ones. Sensitization to cobalt was more prevalent in the metalworkers than in the control group.

Colophonium is a natural substance derived from Pineaceae trees. It is used in a wide range of consumer and occupational products because of its tackiness, and is a known sensitizer.

To analyse the temporal trend of contact allergy to colophonium in north-eastern Italy, and to evaluate the associations with occupations in our geographical area.

From 1996 to 2016, 27 381 patients with suspected allergic contact dermatitis were patch tested in north-eastern Italy. Individual characteristics were documented by use of a standardized questionnaire in 6 departments of dermatology or occupational medicine.

The overall prevalence of colophonium sensitization was 1.67%; the prevalence was significantly higher in women (1.75%) than in men (1.49%). No significant differences among departments were observed. We found significant associations between colophonium sensitization and being a student (odds ratio [OR] 4.64; 95% confidence interval [CI]: 1.04-20.6), being a farmer or fishermen (OR 3.63; 95%CI: 1.21-10.84), being a housekeeper (OR 2.02; 95%CI: 1.08-3.77), and being retired (OR 2.06; 95%CI: 1.08-3.92).

Our study showed that contact allergy to colophonium is still relevant in north-eastern Italy. The frequency of sensitization has dropped significantly over a period of 10 years, but students and farmers/fishermen still have sensitization prevalences above 3.5%. Our results are in line with European data.

Every year, 10 million workers are exposed to metalworking fluids (MWFs) that may be toxic. There are four types of MWFs: neat oils and three water-based MWFs (soluble oil, semisynthetic and synthetic), which are diluted with water and whose composition varies according to the mineral oils ratio. MWFs also contain various additives. To determine the absorption of six amines used as corrosion inhibitors and biocides in MWFs, porcine skin flow-through diffusion cell experiments were conducted with hydrophilic ethanolamines (mono-, di- and triethanolamine, MEA, DEA and TEA respectively) and a mixture of lipophilic amines (dibutylethanolamine, dicyclohexylamine and diphenylamine). The six amines were dosed in four vehicles (water and three generic water-based MWF formulations) and analyzed using a scintillation counter or gas chromatography/mass spectrometry. These 24 h studies showed that dermal absorption significantly (P < 0.05) increased from water for the six amines (e.g. 1.15 ± 0.29% dose; DEA in water) compared to other formulations (e.g. 0.13 ± 0.01% dose; DEA in semisynthetic MWF) and absorption was greatest for dibutylethanolamine in all the formulations. The soluble oil formulation tended to increase the dermal absorption of the hydrophilic amines. The permeability coefficient was significantly higher (P < 0.05) with TEA relative to the other hydrophilic amines (e.g. 4.22 × 10(-4) ± 0.53 × 10(-4) cm h(-1) [TEA in synthetic MWF] vs. 1.23 × 10(-4) ± 0.10 × 10(-4) cm h(-1) [MEA in synthetic MWF]), except for MEA in soluble oil formulation. Future research will confirm these findings in an in vivo pig model along with dermatotoxicity studies. These results should help MWF industries choose safer additives for their formulations to protect the health of metalworkers.

Fragrances are a large group of substances and the second most common cause of allergic contact dermatitis in Spain. These potential allergens are extremely common and the general population is subject to continuous exposure on a daily basis. While the fragrance markers included in the current Spanish standard patch test series are good, there is room for improvement. New markers that have emerged in recent years have proven to be of value in standard series used in other countries. Diagnosing fragrance allergy has taken on even greater importance since the European Union added 26 fragrances to its list of mandatory ingredients to be specified on product labels. The aim of this review is to provide an update on allergic contact dermatitis to fragrances. We examine the main sources of exposure and clinical manifestations of this condition and propose a diagnostic and treatment protocol.

A systematic classification of substances (or mixtures of substances) with regard to various toxicological endpoints is a prerequisite for the implementation of occupational safety strategies. As its principal task the "Commission for the Investigation of Health Hazards of Chemical Compounds in the Work Area" of the "Deutsche Forschungsgemeinschaft" (DFG-MAK Commission) derives and recommends maximum workplace concentrations and biological tolerance values (MAK and BAT values) based exclusively on scientific arguments. Several endpoints are evaluated separately in detail, e.g. carcinogenicity, risks during pregnancy, germ cell mutagenicity or contribution to systemic toxicity after cutaneous absorption. Skin- and airway sensitization is also considered; the present paper focuses on these two endpoints.

Metalworking fluids (MWF) are used in the manufacture of engines, transmissions, chassis parts and other products. In 2003, OSHA denied a union petition to promulgate a standard for MWF. The 3rd Circuit Court of Appeals rejected a union lawsuit to compel OSHA to regulate MWF. OSHA relied exclusively on the 1999 Metal Working Fluids Standards Advisory Committee report, therefore, only evidence available before 1999 was quoted supporting the denial. This review was conducted to identify studies published since 1998.

Electronic reference sources were queried for the terms for metalworking fluids, machining fluids, cutting fluids, cutting oils, coolants, machining, and machinist. All items returned were reviewed for relevance to MWF regulation.

The review noted 227 reports in the peer reviewed literature directly relevant to regulation of MWF exposures. Of these, 26 addressed cancer; 58 respiratory effects; 32 skin effects or absorption; 45 microbial contaminants; and 76 exposure measurements and controls. Three major studies identified excess cancer including lung, liver, pancreatic, laryngeal, and leukemia associated with MWF exposures. Reports strengthened associations of asthma and hypersensitivity pneumonitis with recent exposure to MWF.

Material new evidence demonstrates significant risks to material impairment of health at prevailing exposure levels and feasibility of lower exposure limits.

We have reviewed formaldehyde-releasers used in metalworking fluids (MWFs) in this and a previous part of a two-part article. These biocides do not appear to be frequent or important sensitizers. Even in highly selected patient groups of metalworkers, mean prevalence rates of sensitivity are low: 0.2% for Tris(hydroxymethyl)nitromethane, 1.6% for tris(N-hydroxyethyl)hexahydrotriazine, 1.9% for Bioban P-1487 and Bioban CS-1246, and 2.8% for Bioban CS-1135. In the case of the Biobans, many reactions may have been irritant. Only N,N'-methylenebis(5-methyloxazolidine) has a fairly high mean score of 4.0% in metalworkers. With the exception of Bioban P-1487, there is a clear relationship between positive patch test reactions to the releasers and formaldehyde sensitivity: 40-70% of reactions to releasers occur in patients sensitive to formaldehyde and may therefore be caused by formaldehyde allergy. There is a lack of reliable data on the clinical relevance of contact allergy to the formaldehyde releasers in MWF. In most studies, no data on relevance were provided and in those that did, relevance was often found for a (very small) minority of the reactions only. Also discussed here are the formaldehyde-releasers MDM hydantoin, methenamine, N-methylolchloracetamide, paraformaldehyde, and Preventol D2.

This is part of a series of review articles on formaldehyde-releasers and their relationship to formaldehyde contact allergy. Formaldehyde-releasers used in metalworking fluids (MWF) and a group of releasers not presented in previous articles are discussed. Here, in Part 1 of the article, there is a short overview of the composition and functions of MWF, the function of biocides in them, and adverse reactions to MWF. In addition, the releasers in MWF that have caused contact allergy are presented with CAS, synonyms, molecular formula, chemical structure, applications, patch test studies, and amount of formaldehyde released by them. In Part 2 of the article, the relationship between formaldehyde-releasers used in MWF and formaldehyde contact allergy is discussed as are data on miscellaneous releasers not previously presented, followed by a discussion of Parts 1 and 2 of the article.

Respiratory problems are observed in machinists using soluble metalworking fluid (MWF). Evidences suggest that these problems could be related to the aerosolized microorganisms and their byproducts from MWF. To establish MWF aerosol exposure thresholds and to better understand their effect on human health, these aerosols must be fully characterized. This article evaluates airborne microorganisms and aerosols from soluble MWF in the working environment. Air quality parameters (endotoxin levels, culturable airborne microorganisms, fluid mist, inhalable dust and air exchange rates) were evaluated at 44 sites, in 25 shops in Quebec, Canada. Microorganism concentrations were also measured in MWF. Culturable airborne bacteria concentrations were low, ranging from 1.2 x 10(1) to 1.5 x 10(3) CFU (colony forming units) m(-3), even for metalworking fluid highly contaminated by bacteria (up to 2.4 x 10(9) CFU mL(-1)). Inhalable dust varied between < 0.1 to 2.6 mg m(-3), while air exchange rates were mostly below the standard (4 h(-1)) for this type of workplace, between 0.6 to 14.2 h(-1). Only nine of 44 sites respected the suggested minimum value for air exchange rates. Fluid mist ranged from 0.02 to 0.89 mg m(-3), which is below the threshold limit value (TLV) (ACGIH) of 5 mg m(-3). Airborne endotoxin concentrations ranged from undetectable to 183 EU m(-3) (endotoxin units), showing no correlation with airborne microorganisms or inhalable dust. Most workstations respected the suggested minimum values for fluid mist and showed low concentrations of airborne endotoxin, culturable microorganisms and inhalable dust despite fluid contamination, even when air exchange rates were below the recommendations. Airborne Pseudomonas pseudoalcaligenes was recovered from many sites at significant concentrations. Health-associated risks following exposure to this microorganism should be further investigated.

Metalworking fluids (MWF) are complex mixtures consisting of a variety of components and additives. A lack of scientific data exists regarding the dermal permeation of its components, particularly biocides. The aim of this study was to evaluate the dermal permeation of biocides and other aromatic chemicals in water and in three generic soluble oil, semi-synthetic, and synthetic MWF types in order to evaluate any differences in their permeation profiles. An in vitro flow-through diffusion cell study was performed to determine dermal permeation. An infinite dose of different groups of chemicals (6 biocides and 29 aromatic chemicals) was applied to porcine skin, with perfusate samples being collected over an 8-h period. Perfusate samples were analyzed by gas chromatography/mass spectrometry (GC-MS) and ultra-performance liquid chromatography/mass spectroscopy (UPLC-MS), and permeability was calculated from the analysis of the permeated chemical concentration-time profile. In general, the permeation of chemicals was highest in aqueous solution, followed by synthetic, semi-synthetic, and soluble oil MWF. The absorption profiles of most of the chemicals including six biocides were statistically different among the synthetic and soluble oil MWF formulations, with reduced permeation occurring in oily formulations. Permeation of almost all chemicals was statistically different between aqueous and three MWF formulation types. Data from this study show that permeation of chemicals is higher in a generic synthetic MWF when compared to a soluble oil MWF. This indicates that a soluble oil MWF may be safer than a synthetic MWF in regard to dermal permeation of chemicals to allow for an increased potential of systemic toxicity. Therefore, one may conclude that a synthetic type of formulation has more potential to produce contact dermatitis and induce systemic toxicological effects. The dilution of these MWF formulations with water may increase dermal permeability of biocides, allowing for an enhanced risk for systemic toxicological effects and dermatitis potential.

Machinists and machine maintenance men working in the metal industry use metal-working fluids capable of causing irritant and allergic contact dermatitis. The objectives of this study were to find out the frequency of skin symptoms in machinists and machine maintenance men (metal workers) and to compare the risk of their skin symptoms to that in office workers (controls). A total of 726 male metal workers and 84 controls answered a structured telephone questionnaire enquiring about work, atopy, skin symptoms, their impact on life, etc. The risk of skin symptoms compared with that in the controls was estimated using a logistic regression analysis. Of the metal workers, 20% reported recurring or prolonged dermatitis on their hands or forearms during the past 12 months. The hand or forearm dermatitis (HD) affected mostly the metal workers' mood and their activities at work. Recurring dermatitis elsewhere (DE) than in the hands and in connection with work was reported by 10%. The risk of HD was about twofold and the risk of DE was about fourfold compared with that in the controls. The HD of machinists may be severe and affect their ability to work. DE may have clinical significance in machinists.

Although many allergens in metalworking fluids (MWF) are identified, there are still some MWF components, which are not sufficiently investigated concerning their sensitizing properties.

To investigate sensitization to 10 frequently used MWF components, which are not part of the established MWF test series, in metalworkers with suspected occupational dermatitis due to MWF.

Oleyl alcohol, myristyl alcohol, dimethylolurea, 4,4'-methylenebis morpholine, imazalil, 1-amino-2-propanol (monoisopropanolamine; MIPA), 2-amino-2-ethyl-1,3-propanediol (AEPD), 2,5-bis(n-octyldithio)-1,3,4-thiadiazole, zinc alkyl dithiophosphate and dibenzyl disulfide have been patch tested in 144 patients.

7 patients reacted positively to the formaldehyde releaser 4,4'-methylenebis morpholine, and 6 of these patients also reacted to formaldehyde and/or other formaldehyde releasers. 4 patients reacted positively to myristyl alcohol tested at 10% petrolatum (pet.). Additionally, 20 doubtful or irritant reactions occurred. 1 patient each reacted positively to oleyl alcohol, MIPA, and AEPD. None of the other test substances mentioned above elicited any clear-cut positive reaction. Patch testing with well-known MWF allergens showed proportions of positive reactions, which were comparable to those from other studies, e.g. 11% to monoethanolamine, 8% to colophonium and 3%-5% to various preservatives.

4,4'-methylenebis morpholine may be an important MWF allergen, although clinical relevance could not be stated definitely in every case. Myristyl alcohol should not be patch tested at 10% pet., but at a lesser concentration, due to irritant properties.