Highly cross-linked polyethylene (HXLPE) has reduced wear and revision rates in total hip arthroplasty (THA) in the long term. However, the effect of HXLPE manufacturing characteristics on femoral head penetration has not yet been clearly defined. We report this single-institution study to investigate the clinical and radiological results of various HXLPE liners in THA.

Between January 2001 and December 2013, 904 uncemented THAs using HXLPE liners were performed at our institution. Seven different HXLPE liner types were identified: remelted (n = 3), annealed (n = 2), sequentially annealed (n = 1), and vitamin E diffused (n = 1). A total of 746 hips were available for a minimum follow-up of ten years. The linear femoral head penetration rate was measured at six weeks and at one, five, ten, and 15 years, applying the Dorr criteria to digitized radiographs, using the Roman v. 1 70 software package for analysis.

No patient was revised due to wear or osteolysis. The mean total femoral head penetration ten years after THA ranged from 0.14 mm (SD 0.06) to 0.20 mm (SD 0.17) for all groups (p = 0.649). Femoral head penetration > 0.40 mm at ten years was observed in 27 (3.6%) hips. From one to 15 years after surgery, mean total penetration was 0.21 mm (SD 0.13) in components with an acetabular inclination > 50° and 0.10 mm (SD 0.12) in those placed between 35° and 50° (p < 0.001). The radiological analysis did not detect osteolysis in any hip.

Although HXLPE characteristics can result in different wear performance in patients undergoing THA at a mean follow-up of 15 years, the clinical and radiological results were excellent in all groups. The position of the acetabular component can influence the femoral head penetration of modern HXLPEs.

Highly cross-linked polyethylene (XLPE) was developed in an attempt to address the problems of wear and osteolysis causing failure in patients who undergo total hip arthroplasty (THA). The aim of this study was to compare the rates of PE wear and revision, and the clinical outcomes of conventional polyethylene (CPE) and XLPE, in a prospective double-blind randomized controlled trial (RCT) with a minimum follow-up of 20 years.

A total of 122 patients were randomized to be treated with either a CPE (Enduron) or an XLPE liner (Marathon; both DePuy Synthes, USA). Other than the liners, identical components were used: a Duraloc 300 metal shell, a 28 mm diameter cobalt-chromium femoral head, and a cemented Charnley Elite femoral component. All patients were followed with anteroposterior (AP) and lateral radiographs at two days, six weeks, three and six months, and one, two, three, four, five, ten, and 20 years. PE wear was measured using PolyMig, which has a phantom validated accuracy of approximately 0.09 mm. The outcomes at ten years' follow-up in these patients have previously been reported.

At a minimum follow-up of 20 years, 47 patients had died, five of whom had undergone a revision. Another 32 patients had undergone a revision and were alive, leaving 43 patients who had not undergone a revision and were alive (15 in the Enduron group and 28 in the Marathon group). No patients were lost to follow-up, but radiographs could not be obtained at final follow-up in two due to dementia, leaving 41 patients (15 in the Enduron group and 26 in the Marathon group) available for the measurement of PE wear. After the bedding-in period, the rate of wear was 0.181 mm/yr (95% CI 0.175 to 0.188) in the Enduron group and 0.034 mm/yr (95% CI 0.028 to 0.039) in the Marathon group. At 20-year follow-up, 37 patients had required revision. Those with CPE liners had a revision rate three times higher (28/37) than those with XLPE liners (9/37).

This is the longest-term RCT showing substantially improved clinical and radiological results when XLPE is used as the bearing surface in patients who undergo primary THA.

Total hip arthroplasty (THA) is a proven and effective treatment for end-stage osteoarthritis. The success of THA is due in part to highly crosslinked polyethylene (XL) implants. In 2007, a new generation of polyethylene liners entered clinical use. The new liners infused polyethylene with vitamin E and became vitamin E infused polyethylene (EP). The EP liner was hypothesized to prevent the loss of mechanical properties caused by oxidation, extending the lifetime of the implant. This international prospective study aimed to quantify the clinical outcomes of a 977 patient cohort receiving EP and XL liners 10 years after surgery.

The prospective cohort study began in 2007, including eight countries and 17 centers. The final cohort included 977 patients (EP liner: n = 520; XL liner: n = 457). Patients were followed preoperatively, postoperatively, and at 1, 3, 5, 7, and 10 years. Each follow-up visit involved clinical evaluation, radiography, and survey collection. The demographics and revisions were also recorded. Mann-Whitney U tests were used to evaluate statistical differences.

At 10 years following surgery, 534 patients were eligible for follow-up. Of those eligible, 352 patients returned for clinical evaluation (65.9% eligible; 36.0% overall). No statistical differences were found (P > 0.05) in the demographics of the followed-up cohort. The linear wear rates were 0.00338 mm/year for EP liners and 0.0236 mm/year for XL liners using individual regression (P < 0.0001). No significant difference was observed in wear rates using cohort regression. Similarly, surveys suggested no significant outcomes between the EP and XL liner cohorts. The overall incidence of revision was 2.3% for EP and 2.0% for XL liners.

The EP liner demonstrated significantly lower wear than its XL counterparts at 10 years after implantation. Results are promising, as vitamin E polyethylene may improve the lifetime performance of THA implants and ensure that arthroplasty innovations reflect the changing patient population.

The aim of our study was to compare implant survival rates of different total hip arthroplasty (THA) bearings in the Nordic Arthroplasty Register Association.

All conventional primary THAs performed between 2005 and 2017 in patients aged more than 55 years who had primary osteoarthritis were studied. Metal-on-highly cross-linked polyethylene (MoXLP), ceramic-on-highly cross-linked polyethylene (CoXLP), ceramic-on-ceramic (CoC), and metal-on-metal (MoM) bearings were included. The outcome was a revision. Kaplan-Meier (KM) estimates were calculated at 5 and 10 years. The risk for revision was analyzed using a flexible parametric survival model adjusted for nation, age, sex, femoral head size, and femoral fixation.

A total of 158,044 THAs were included. The 5-year KM estimates were 95.9% (95% confidence interval [CI] 95.8 to 96.1) in MoXLP, 95.8% (95% CI 95.6 to 96.1) in CoXLP, 96.7% (95% CI 96.4 to 97.0) in CoC, and 93.9% (95% CI 93.5 to 94.4) in MoM. The 10-years KM estimates were 94.2% (94.0 to 94.5) in MoXLP, 94.3% (93.9 to 94.8) in CoXLP, 95.4% (95.0 to 95.9) in CoC, and 85.5% (84.9 to 86.2) in MoM. Compared with MoXLP, the adjusted risk for revision was lower in CoC (hazard ratio [HR] 0.6, CI 0.5 to 0.6), similar in CoXLP (HR 1.0, CI 0.9 to 1.0), and higher in MoM (HR 1.3, CI 1.2 to 1.4).

We found that MoXLP, CoXLP, and CoC bearings evinced comparably high implant survival rates up to 10 years, and they can all be regarded as safe options in this patient group. The MoM bearings were associated with clearly lower survivorship. The CoC bearings had the highest implant survival and a lower adjusted risk for revision compared with highly cross-linked polyethylene bearings.

Second-generation highly cross-linked polyethylene (HXLPE) has revolutionized total hip arthroplasty. However, the long-term risks and benefits of HXLPE in primary total knee arthroplasty (TKA) remain unknown. This randomized clinical trial evaluated implant survivorship, complications, radiographic results, and clinical outcomes of HXLPE and conventional ultra-high molecular weight polyethylene (UHMWPE) inserts in primary TKAs.

We enrolled 518 patients (518 knees) who underwent primary TKA in 3 centers within 1 tertiary referral network. The mean age was 67 years, the mean body mass index was 32 kg/m 2 , and 58% of the patients were women. All of the patients underwent primary TKA with a cemented posterior-stabilized tibial insert and patellar resurfacing. Randomization proceeded via stratified dynamic allocation. The patients were blinded to their study group allocation: those in the control group (254 knees) underwent TKA with an UHMWPE insert (N2Vac; Stryker); those in the treatment group (264 knees) received an HXLPE insert (X3; Stryker). Kaplan-Meier survivorship, radiographic results, and clinical outcomes were assessed. This trial was registered with ClinicalTrials.gov. The mean follow-up was 11 years.

The 10-year overall survivorship free from any revision and from any reoperation was 96% and 94%, respectively. There were no differences in the risk of revision or reoperation between the groups (p > 0.05). There were a total of 19 revisions. Revision indications included periprosthetic joint infection (14 knees), instability (4 knees), and open reduction and internal fixation (ORIF) for a patellar fracture due to osteolysis around a UHMWPE insert (1 knee). There were no revisions due to polyethylene wear, osteolysis, or fracture of the post in the HXLPE group. The radiographic results and clinical outcomes were otherwise similar.

Notably, no wear-related failures were identified in the HXLPE group, but there was 1 case of osteolysis in the UHMWPE group.

Therapeutic Level I . See Instructions for Authors for a complete description of levels of evidence.

Total hip arthroplasty (THA) is a widely performed surgical procedure that has evolved significantly due to advancements in artificial intelligence (AI) and robotics. As demand for THA grows, reliable tools are essential to enhance diagnosis, preoperative planning, surgical precision, and postoperative rehabilitation. AI applications in orthopedic surgery offer innovative solutions, including automated hip osteoarthritis (OA) diagnosis, precise implant positioning, and personalized risk stratification, thereby improving patient outcomes. Deep learning models have transformed OA severity grading and implant identification by automating traditionally manual processes with high accuracy. Additionally, AI-powered systems optimize preoperative planning by predicting the hip joint center and identifying complications using multimodal data. Robotic-assisted THA enhances surgical precision with real-time feedback, reducing complications such as dislocations and leg length discrepancies while accelerating recovery. Despite these advancements, barriers such as cost, accessibility, and the steep learning curve for surgeons hinder widespread adoption. Postoperative rehabilitation benefits from technologies like virtual and augmented reality and telemedicine, which enhance patient engagement and adherence. However, limitations, particularly among elderly populations with lower adaptability to technology, underscore the need for user-friendly platforms. To ensure comprehensiveness, a structured literature search was conducted using PubMed, Scopus, and Web of Science. Keywords included "artificial intelligence", "machine learning", "robotics", and "total hip arthroplasty". Inclusion criteria emphasized peer-reviewed studies published in English within the last decade focusing on technological advancements and clinical outcomes. This review evaluates AI and robotics' role in THA, highlighting opportunities and challenges and emphasizing further research and real-world validation to integrate these technologies into clinical practice effectively.

The present Bayesian network meta-analysis compared different types of polyethylene liners in total hip arthroplasty (THA) in terms of wear penetration (mm/year) and rate of revision. The type of liners compared were the crosslinked ultra-high molecular weight polyethylene (CPE/UHMWPE), Vitamin E infused highly cross-linked polyethylene (HXLPE-VEPE), modified cross-linked polyethylene (MXLPE), highly cross-linked polyethylene (HXLPE), Cross-linked polyethylene (XLPE). This study was conducted according to the PRISMA extension statement for reporting systematic reviews incorporating network meta-analyses of healthcare interventions. In June 2024, PubMed, Scopus, Embase, Google Scholar, and Cochrane databases were accessed. A time constraint was set from January 2000. All investigations which compared two or more types of polyethylene liners for THA were accessed. Only studies that clearly stated the nature of the liner were included. Data from 60 studies (37,352 THAs) were collected. 56% of patients were women. The mean age of patients was 60.0 ± 6.6 years, the mean BMI was 27.5 ± 2.0 kg/m2. The mean length of follow-up was 81.6 ± 44.4 months. Comparability was found at baseline between groups. XLPE and HXLPE liners in THA are associated with the lowest wear penetration (mm/year) and the lowest revision rate at approximately 7 years of follow-up.

Highly cross-linked polyethylene (HXLPE) has been an excellent bearing for total hip arthroplasty (THA) due to improved wear characteristics compared to conventional materials. Patients 50 years of age or younger are at high risk for wear-related complications of their THA, and few studies have followed these patients who have HXPLE into the third decade.

In a retrospective review of 88 consecutive THAs performed in 77 patients aged 50 years and younger (mean 41; range, 20 to 50), in which HXLPE was utilized, they were evaluated for their clinical and radiographic results at an average of 20-year follow-up (range, 18 to 24). The current study reports on longer-term follow-up from our previously published series at shorter follow-up times. Patients were categorized by femoral head material: cobalt chrome (n = 14), ceramic (n = 30), and oxidized zirconium (n = 22) and by femoral head size: 26 mm (n = 12), 28 mm (n = 46), and 32 mm (n = 8). Harris Hip Scores were collected preoperatively and at the most recent follow-up. Radiographs were evaluated for linear and volumetric wear, radiolucent lines, and osteolysis.

Mean Harris Hip Scores improved from 47.1 (standard deviation [SD] 8.8) preoperatively to 92.0 (SD 7.7) (P < .0001) at 20-year follow-up. There was one hip that was revised for recurrent instability, and no hip demonstrated radiographic evidence of loosening or osteolysis. The mean polyethylene linear wear rate was 0.017 (SD 0.012) mm/y, and the mean polyethylene volumetric wear rate was 3.15 (SD 2.8) mm3/year, with no significant differences based on articulation type or head size.

Total hip arthroplasty with HXLPE in patients ≤ 50 years of age continues to demonstrate excellent long-term clinical and radiographic outcomes with low wear characteristics at 20-year follow-up, regardless of femoral head material or size.

There is a paucity of data beyond 15 years on the survivorship of total hip arthroplasty since the introduction of highly cross-linked polyethylene (HXLPE) liners. Our aim was to evaluate implant survivorship, liner wear rates, and clinical outcomes after primary total hip arthroplasty using HXLPE liners implanted between 1999 and 2002.

Between 1999 and 2002, 690 primary total hip arthroplasties utilizing 28-mm femoral heads and HXLPE liners of a single design were identified using our institutional total joint registry. Femoral heads were made of metal in 96% of cases and ceramic in 4%. The mean age was 56 years, 48% were women, and the mean body mass index was 30. Survivorship analyses were performed for the outcomes of implant revision, reoperation, and complications for the entire cohort. Linear HXLPE liner wear rates were determined on 197 hips with radiographs with more than 18.5 years of follow-up.

At 20 years, survivorship free of revision was 94%, free of reoperation was 92%, and free of any complication was 81%. There were no documented wear-related revisions. The linear wear rate at a mean of 20.3 years postoperatively was 0.02 mm/y. There was no statistically significant difference in measured wear observed between the first available postoperative radiographs and those taken at the final follow-up. The use of elevated liners, patient body mass index, age, preoperative diagnosis, acetabular component inclination, and anteversion angles were not associated with increased wear rates. Mean Harris hip scores improved from 52 preoperatively to 90 at greater than 18.5 years CONCLUSIONS: Primary total hip arthroplasties using a single first-generation HXLPE liner demonstrated excellent survivorship and clinical outcomes at long-term follow-up with no wear-related revisions. Wear rates of HXLPE liners at 20 years are exceedingly low and are not significantly impacted by acetabular component position or patient-dependent variables such as BMI.

IV.

Highly cross-linked polyethylene (HXLPE) was introduced to improve wear in total hip arthroplasty, with manufacturers implementing different thermal treatments to reduce oxidation. It is important to understand how long-term time in vivo affects the wear of these materials. The purpose of this study was to investigate the wear and oxidative performance of first-generation HXLPE hip inserts implanted for greater than 10 years and compare annealed and remelted HXLPE formulations.

There were 49 total hip arthroplasty liners retrieved during routine revision surgery as part of an institutional review board-approved implant retrieval program. Penetration rates for the liners were calculated as the difference between the thickness of the unloaded and loaded regions divided by implantation time. Oxidation indices for the rim, locking mechanism, articulating surface, and backside regions were measured using Fourier-transform infrared spectroscopy according to American Society for Testing and Materials 2102. Mann-Whitney U tests were used to determine the statistical difference between annealed and remelted components.

The cohort had an average implantation time of 13.1 ± 2.6 years for annealed and 12.1 ± 1.7 years for remelted components. The components were revised most often for polyethylene wear, instability, and loosening. The penetration rate averaged 0.0177 ± 0.014 mm/year for annealed components and 0.015 ± 0.022 mm/year for remelted components. Penetration rates did not differ between the remelted and annealed cohorts (P = .28). Oxidation indices were found to be significantly higher in the annealed cohort for all regions of interest (P < .001).

Oxidation was found to be higher in the annealed HXLPE; however, this does not seem to be associated with greater wear as we found the average penetration rates for the cohorts were low, and the penetration rates were similar between the annealed and remelted cohorts.

Total hip arthroplasty (THA) in younger patients remains controversial due to concerns regarding long-term implant survival and potential complications. This study aimed to evaluate long-term clinical outcomes, complications, differences in complication and revision rates by bearing surfaces, and Kaplan-Meier survival curves for THA in patients under 20 years old.

A retrospective review was conducted for 65 patients (78 hips) who underwent THA between 1991 and 2018. Their mean age was 18.9 years. Their clinical outcomes were assessed using the Harris Hip Score (HHS). Radiological outcomes were evaluated based on the presence of loosening, osteolysis, and heterotopic ossification. Complications such as dislocation, periprosthetic fractures, and infections were assessed. The mean follow-up period was 13.2 years (range, 5.0-31.2 years).

The mean HHS improved from 44.6 to 90.1. There were two cases of dislocation. However, no periprosthetic fracture, deep infection, or ceramic component fracture was noted. There were 19 revisions of implants. Eighteen of 19 hips were operated with hard-on-soft bearings in the index surgery (p < 0.01). The 23-year survivorship was 97.8% for THA using ceramic-on-ceramic bearings, while the 31-year survivorship was 36.7% using hard-on-soft bearings.

THA in patients under 20 years old yielded promising clinical and radiological outcomes, although polyethylene-bearing-related concerns persisted. Previously operated patients with hard-on-soft bearing should be meticulously examined during the follow-up. As ceramic-on-ceramic bearing showed excellent survivorship in this particular cohort, we recommend the use of this articulation as the bearing of choice.

Juvenile idiopathic arthritis (JIA) is a chronic inflammatory condition of childhood that frequently affects the hip. Total hip arthroplasty (THA) in JIA can be challenging due to the patient's young age, small proportion, complex anatomy, and bone loss. Outcome data are limited.

We reviewed prospectively collected data in 57 JIA patients (83 hips) who underwent THA between 1986 and 2020 by a single surgeon. The median patient age at surgery was 26 years (range, 14 to 62). Reoperation-free survival was assessed via the cumulative incidence function, accounting for the competing risk of death. Relationships between patient and implant factors and survivorship were evaluated by stratification of the cumulative incidence function and Gray's tests. Wilcoxon signed rank tests were used to assess the preoperative to latest postoperative change in patient-reported outcome measures.

At a median (interquartile range) of 12 (4, 20) years of follow-up, 13 (16%) patients underwent reoperation, most commonly for polyethylene wear and osteolysis (7 hips). The estimated incidence of 10-year, 20-year, and 30-year revision (95% confidence interval) were 11.3% (4.5, 21.6%), 18.5% (8.9, 30.9%), and 40.6% (19.4, 60.9%), respectively. There were no differences in survival based on patient age, sex, implant fixation method, polyethylene type, or thickness. All patient-reported outcome measures improved from preoperative to latest follow-up.

Primary THA is a durable and effective treatment for JIA patients with severe hip involvement and results in major improvements in pain and function. We did not identify any factors predictive of failure.

This study compares the re-revision rate and mortality following septic and aseptic revision hip arthroplasty (rTHA) in registry data, and compares the outcomes to previously reported data.

This is an observational cohort study using data from the German Arthroplasty Registry (EPRD). A total of 17,842 rTHAs were included, and the rates and cumulative incidence of hip re-revision and mortality following septic and aseptic rTHA were analyzed with seven-year follow-up. The Kaplan-Meier estimates were used to determine the re-revision rate and cumulative probability of mortality following rTHA.

The re-revision rate within one year after septic rTHA was 30%, and after seven years was 34%. The cumulative mortality within the first year after septic rTHA was 14%, and within seven years was 40%. After multiple previous hip revisions, the re-revision rate rose to over 40% in septic rTHA. The first six months were identified as the most critical period for the re-revision for septic rTHA.

The risk re-revision and reinfection after septic rTHA was almost four times higher, as recorded in the ERPD, when compared to previous meta-analysis. We conclude that it is currently not possible to assume the data from single studies and meta-analysis reflects the outcomes in the 'real world'. Data presented in meta-analyses and from specialist single-centre studies do not reflect the generality of outcomes as recorded in the ERPD. The highest re-revision rates and mortality are seen in the first six months postoperatively. The optimization of perioperative care through the development of a network of high-volume specialist hospitals is likely to lead to improved outcomes for patients undergoing rTHA, especially if associated with infection.

Sequential modifications to the manufacturing process of highly cross-linked polyethylene (HXLPE) have improved the wear resistance and implant survival of these liners in total hip arthroplasty (THA). However, no study has examined the long-term (mean 10 year) wear rates and clinical outcomes of third-generation HXLPE in THA. The aim of our study was to report the longest-to-date analysis of wear rates and clinical outcomes of a third-generation HXLPE liner.

A series of 133 THAs using a specific HXLPE acetabular liner were retrospectively evaluated. Linear and volumetric wear rates were determined using a validated radiographic technique and clinical outcomes were analyzed. Multivariate analyses were performed to determine risk factors for accelerated wear.

At a mean follow-up of 10.4 years (range, 8 to 13.4), the mean linear wear rate was 0.0172 mm/year and the mean volumetric wear rate was 16.99 mm3/year. There were no instances of osteolysis or mechanical failures at any time point and there was a 100% acetabular component survival rate. Younger age and use of offset liners were independent risk factors for increased wear (P < .01 for both).

Our series of a third-generation HXLPE demonstrated very low wear rates and excellent implant survival at a mean of 10.4 years following primary THA. Future comparative studies at the 15- and 20-year follow-up timepoints are necessary to determine if such findings translate to true improvements in the tribological properties and longevity of these liners when compared to previous generations of HXLPE liners.

To reduce the risk of dislocation, larger head size can be used in total hip arthroplasty (THA). However, larger head size leads to thinner acetabular liners. With conventional polyethylene, thickness of >8 mm has been advocated to reduce stress and wear rate of the polyethylene. Modern polyethylene has become more wear-resistant. In this study, we investigated if the thickness of sequentially cross-linked polyethylene (XLPE) liners is associated with failure of THA in the medium term.

3654 THAs were included (2009-2016), in which THA was performed with a XLPE liner in combination with a 36-mm femoral head. Patient and surgical characteristics were collected. We compared implant survival of THA with thin liners (<7.9 mm) and thick liners (⩾7.9 mm) with a Kaplan Meier survival analysis at 5 years, median follow-up and 10 years of follow-up with and point aseptic loosening and performed a multivariate analysis to estimate hazard ratios (HR).

Median follow-up was 7.7 years (IQR 5.6-9.8). In total, 179 revision procedures were performed, where 82 revisions (46%) were performed for aseptic loosening. The survival rate at 5 years, median and 10 years of follow-up showed no statistically significant difference in implant survival. The survival rate at 10 years follow-up was for thin liners 97.1% (95% CI, 96.3-97.9) and for thick liners 98.2% (95% CI, 97.4-99.0) in the aseptic loosening group (chi-square 2.55; p = 0.11).The adjusted HR for thick liners (⩾7.9 mm) was 0.65 (95% CI, 0.38-1.08) compared with the thin liners (<7.9 mm), which was not significantly different.

From this single-centre retrospective study it appears that thinner polyethylene liners are well tolerated when using second-generation highly cross-linked polyethylene. Thickness of the XLPE liners did not influence the risk of aseptic loosening of the implants in the medium term.

Oxidized zirconium (OxZi) and highly cross-linked polyethylene (HXLPE) were developed to minimize wear and risk of osteolysis in total hip arthroplasty (THA). However, retrieval studies have shown that scratched femoral heads may lead to runaway wear, and few reports of long-term results have been published. The purpose of this investigation is to report minimum ten-year wear rates and clinical outcomes of THA with OxZi femoral heads on HXLPE, and to compare them with a retrospective control group of cobalt chrome (CoCr) or ceramic heads on HXLPE.

From 2003 to 2006, 108 THAs were performed on 96 patients using an OxZi head with a HXLPE liner with minimum ten-year follow-up. Harris Hip Scores (HHS) were collected preoperatively and at the most recent follow-up (mean 13.3 years). Linear and volumetric liner wear was measured on radiographs of 85 hips with a minimum ten-year follow-up (mean 14.5 years). This was compared to a retrospective control group of 45 THAs using ceramic or CoCr heads from October 1999 to February 2005, with a minimum of ten years' follow-up.

Average HHS improved from 50.8 to 91.9 and 51.0 to 89.8 in the OxZi group and control group, respectively (p = 0.644), with no osteolysis in either group. Linear and volumetric wear rates in the OxZi group averaged 0.03 mm/year and 3.46 mm3/year, respectively. There was no statistically significant difference in HHS scores, nor in linear or volumetric wear rate between the groups, and no revision for any indication.

The radiological and clinical outcomes, and survivorship of THA with OxZi femoral heads and HXLPE liners, were excellent, and comparable to CoCr or ceramic heads at minimum ten-year follow-up. Wear rates are below what would be expected for development of osteolysis. OxZi-HXLPE is a durable bearing couple with excellent long-term outcomes.

The purpose of this study was to assess 10-year patient-reported outcome measures, complications, polyethylene wear-rates, and implant survivorships in patients ≤30 years of age treated with contemporary total hip arthroplasty (THA).

We retrospectively assessed 121 patients (144 hips) who underwent THA at age ≤30 years (mean 23 [range, 11 to 30]) at an average follow-up duration of 10.7 years (range, 8 to 17). Highly-crosslinked polyethylene acetabular liners were used in all cases. Femoral heads were ceramic (74%) or cobalt-chrome (26%). There were 52 hips (36%) that had previous surgery and 31 hips (22%) were in patients who had associated major systemic comorbidities. We analyzed the modified Harris Hip scores, University of California Los Angeles Activity Scores, major complications, polyethylene wear-rates, and implant survivorships.

At final follow-up, the average modified Harris Hip scores improved from 47 (±15.1) to 81 (±19.5) with an average 34-point improvement. The University of California Los Angeles scores improved from 4.0 (±2.3) to 6.0 (±2.4). The major complication rate was 5.6%. There were 6 hips (4.2%) that were revised. Indications for revision included instability (3, 2.1%), late infection (1, 0.7%), liner dissociation (1, 0.7%), and acetabular loosening (1, 0.7%). Mean linear (0.0438 mm/y) and volumetric (29.07 mm3/y) wear rates were low. No periprosthetic osteolysis was detected in any hip. Survivorship free from revision for any reason was 97.2, 95.8, and 95.8% at 5, 10, and 15 years.

Contemporary THA in patients ≤30 years of age is associated with marked clinical improvements at 10-year follow-up and encouraging survivorship estimates at 15 years.

Highly cross-linked polyethylene (HXLPE) acetabular bearing surfaces have appeared to offer excellent wear resistance, low incidence of wear-related osteolysis, and high implant survivorship at 10-year to 15-year follow-up. However, concerns over potential performance deterioration at longer-term follow-up remain - particularly in younger patients - and outcome data into the third decade have not been available.

We retrospectively assessed 62 patients (68 hips) who underwent primary total hip arthroplasty (THA) at age ≤50 years with a single manufacturer's cementless components, remelted HXLPE liner, and small diameter (26 and 28 millimeter) cobalt-chromium (CoCr) femoral heads at minimum 18-year follow-up. We assessed clinical outcomes (modified Harris Hip score, University of California Los Angeles Activity Score, polyethylene wear rates, radiographic findings (osteolysis, component loosening), and implant survivorship.

At 20.6-year mean follow-up (range, 18 to 23 years) modified Harris Hip scores for surviving hips remained an average of 41 points above preoperative baseline (49 versus 90, P < .001) and UCLA scores 2.8 points above baseline (3.7 versus 6.4, P < .001). Wear analysis revealed a population linear wear rate of 0.0142 mm/y (standard deviation (SD), 0.0471) and volumetric wear rate of 10.14 mm3/y (SD, 23.41). Acetabular lysis was noted in 2 asymptomatic hips at 16.6 and 18.4 years. No components were radiographically loose. Survivorship free from wear-related revision was 100% at 20 years (97% free from any revision).

The HXLPE-CoCr bearing couple with small femoral heads continues to be extremely effective 20 years after primary THA in the younger patient population.

Total hip arthroplasty (THA) is a common procedure for patients suffering from hip pain e.g. from osteoarthritis, osteonecrosis, or hip fractures. The satisfaction of patients undergoing THA is influenced by the choice of implant type and material, with one key factor being the selection of the appropriate material combination for the bearing surface. In this Bayesian network meta-analysis, we investigated the impact of material combinations for the bearing surface on the longevity of hip implants. The wear penetration rate per year and the total wear penetration in the liner resulting from different material combinations, as well as the survival rate at last follow-up, were examined. We analyzed a total of 663,038 THAs, with 55% of patients being women. Mean patient age was 59.0 ± 8.1 years and mean BMI 27.6 ± 2.6 kg/m2. The combination of an aluminium oxide (Al2O3) head and an Al2O3 liner demonstrated the lowest wear penetration at last follow-up and the lowest rate of wear penetration per year. Additionally, the combination of a crosslinked polyethylene (XLPE) liner and a zircon oxide (ZrO2) head demonstrated the lowest rate of revision at last follow-up. These findings underscore the importance of careful material selection for hip implant bearing surfaces to optimize their longevity and patient satisfaction after THA.

While total hip arthroplasty (THA) remains effective for improvement of pain and function in patients with osteoarthritis and avascular necrosis, there remain areas of continued pursuit of excellence, including decreasing rates of dislocation, leg length discrepancy, implant loosening, and infection. This review article covers several bearing surfaces and articulations, computer-assisted navigation and robotic technology, and minimally invasive surgical approaches that have sought to improve such outcomes. Perhaps the most significant improvement to THA implant longevity has been the broad adoption of highly cross-linked polyethylene, with low wear rates. Similarly, navigation and robotic technology has proven to more reproducibly achieve intraoperative component positioning, which has demonstrated clinical benefit with decreased risk of dislocation in a number of studies. Given the projected increase in THA over the coming decades, continued investigation of effective incorporation of technology, soft tissue-sparing approaches, and durable implants is imperative to continued pursuit of improved outcomes in THA.

Total hip arthroplasty (THA) has in recent years trended toward a younger, more physically demanding patient population. Mid- to long-term studies of all ages of THA patients using highly cross-linked polyethylene (HXLPE) have been favorable, but concerns about its long-term failure and wear-related complications remain for young THA patients. In this narrative review, a search of the PubMed/MEDLINE and Cochrane databases was performed, and we identified six studies with a minimum 15-year follow-up of HXLPE with various femoral head materials. Wear-related revisions were exceedingly low for patients under the age of 55, with variable reports of non-clinically significant osteolysis. Higher activity levels, a larger femoral head size, and femoral head material were not associated with greater long-term wear rates. Young THA with metal or ceramic on HXLPE is exceedingly durable with favorable outcomes at follow-ups of over 15 years.

Total hip arthroplasty (THA) is a successful orthopaedic surgical procedure, and its longevity depends on bearing components and implant fixation. Optimizing polyethylene and ceramics has led to improved wear parameters and contributed to improved long-term outcomes. The present systematic review investigated whether time span from implantation, patient characteristics and performance status exert an influence on liner wear and head migration in THA. This study was conducted in conformity to the 2020 PRISMA guidelines. All the clinical investigations which reported quantitative data on the amount of liner wear and head migration in THA were considered. Only studies which reported quantitative data at least on one of the following patient characteristics were suitable: mean age, mean BMI (kg/m2), sex, side, time span between the index THA and the last follow-up (months) were eligible. A multiple linear model regression analysis was employed to verify the association between patient characteristics and the amount of liner wear and/or head migration. The Pearson Product-Moment Correlation Coefficient was used to assess the association between variables. Data from 12,629 patients were considered. The mean length of the follow-up was 90.5 ± 50.9 months. The mean age of patients at surgery was 58.4 ± 9.4 years, and the mean BMI was 27.2 ± 2.5 kg/m2. 57% (7199 of 12,629 patients) were women, and in 44% (5557 of 12,629 patients) THAs were performed on the left. The mean pre-operative Harris hip score was 46.5 ± 6.0 points. There was evidence of a moderate positive association between the amount of liner wear and the time elapsed between the index surgery to the follow-up (P = 0.02). There was evidence of a moderate positive association between the amount of head migration and the time elapsed between the index surgery to the follow-up (P = 0.01). No further statistically significant association was found. The time elapsed between the index surgery to the follow-up was the most important factor which influence the head migration and liner wear in THA. Patients' characteristics and preoperative physical activity did not influence the amount of head migration and liner wear.

The number of total joint replacements is increasing, especially in elderly patients, and so too are implant-related complications such as prosthesis loosening. Wear particles from the prosthesis induce a chronic inflammatory reaction and subsequent osteolysis, leading to the need for revision surgery. This study investigated the therapeutic effect of NF-ĸB decoy oligodeoxynucleotides (ODN), mesenchymal stem cells (MSCs), and genetically-modified NF-ĸB sensing interleukin-4 over-secreting MSCs (IL4-MSCs) on chronic inflammation in aged mice. The model was generated by continuous infusion of contaminated polyethylene particles into the intramedullary space of the distal femur of aged mice (15-17 months old) for 6 weeks. Local delivery of ODN showed increased bone mineral density (BMD), decreased osteoclast-like cells, increased alkaline phosphatase (ALP)-positive area, and increased M2/M1 macrophage ratio. Local injection of MSCs and IL4-MSCs significantly decreased osteoclast-like cells and increased the M2/M1 ratio, with a greater trend for IL4-MSCs than MSCs. MSCs significantly increased ALP-positive area and BMD values compared with the control. The IL4-MSCs demonstrated higher values for both ALP-positive area and BMD. These findings demonstrated the therapeutic effects of ODN, MSCs, and IL4-MSCs on chronic inflammatory osteolysis in aged mice. The two MSC-based therapies were more effective than ODN in increasing the M2/M1 macrophage ratio, reducing bone resorption, and increasing bone formation. Specifically, MSCs were more effective in increasing bone formation, and IL4-MSCs were more effective in mitigating inflammation. This study suggests potential therapeutic strategies for treating wear particle-associated inflammatory osteolysis after arthroplasty in the elderly.

While total hip arthroplasty (THA) is generally very successful, certain patients remain dissatisfied. A common concern, especially in younger and more active patients, is the weight the implant will add to the hip. However, there is very little data available to help guide surgeons in addressing this concern. The goal of this study was therefore to compare the weight of the total hip arthroplasty implants to that of tissue removed.

That the weight of the total hip arthroplasty implants would exceed that removed tissue.

A prospective study was conducted in 104 patients, without interfering with surgical plans. To account for different implant designs, especially relating to stem fixation, we included both cementless (n=51) and cemented (n=53) femoral stems. During the procedure, the removed bone and soft tissues, as well as the post-implantation cement were collected and weighed. The weight of the implants was provided by the manufacturer.

Both cemented and cementless THA implants proved significantly heavier than the removed bone and soft tissues. The median weight gained was 145g [IQR: 123-168] with the cementless implant and 241g [221-364] with the cemented implant (p<0.001). Multivariable regression analysis of patient- or implant factors influencing weight gain after THA revealed that weight gain decreased with patient BMI (β=-1.0, 95% CI: -2.0--0.1 (p=0.034)). In contrast, weight gain increased slightly with total implant weight (β=0.7, 95% CI: 0.6-0.8 (p≤0.001)). Further, weight gain was greater for women (β=19.0, 95% CI: 9.1-29.0 (p≤0.001) (men 150g [135-219], women 211g [157-250] (p=0.010)) and patients who received the cemented stem (β=40.0, 95% CI, 19.4-46.5, p≤0.001).

Current models cause a two- to three-fold gain of weight at the hip joint after THA. While it is not clear whether this weight increase has any clinical repercussions, this finding can be helpful when a patient raises questions on this topic during the preoperative counseling. More research is necessary to determine whether lighter implants may be beneficial for patients.

III, case control study.

Wear between the femoral head and acetabular liners continues to limit the longevity of total hip arthroplasty implants despite advances in implant materials. The purpose of this meta-analysis was to compare linear wear rates of cobalt-chromium (CoCr) and fourth-generation ceramic femoral heads on highly cross-linked polyethylene (XLPE) liners.

A systematic review following Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines was conducted to identify all studies between 2003 and 2020 that examined in vivo wear rates of either fourth-generation ceramics or CoCr femoral heads on XLPE liners. Studies were analyzed in a weighted means analysis of wear rates and a random effects meta-analysis.

A total of 36 studies met inclusion criteria (1,657 CoCr and 659 ceramic patients). The pooled, weighted mean wear rate was 0.063 mm/year (standard deviation [SD]: 0.061, confidence interval [CI]: 0.049-0.077) for CoCr and 0.047 mm/year (SD: 0.057, CI: 0.033-0.062; P < .01) for ceramic (P < .01). A meta-analysis of 4 studies directly comparing ceramic and CoCr found that CoCr heads demonstrated 0.029 mm/year more wear than ceramic heads (95% CI: 0.026-0.059, P = .306). Mean wear for 32-mm heads was significantly higher for ceramic (P < .01), while mean wear for 36-mm heads was significantly higher for CoCr (P < .01).

Fourth-generation ceramic femoral heads were found to have significantly lower wear rates than CoCr heads. Unlike previous studies, this meta-analysis included only in vivo studies and those with the same generation of highly XLPE liners.

Highly cross-linked polyethylene (HXLPE) for total hip arthroplasty was developed to improve wear resistance in vivo and associated complications in comparison to ultrahigh molecular weight polyethylene. This material typically goes through various free-radical stabilization techniques by remelting, single-annealing, or sequentially annealing the polyethylene to improve in vivo oxidation and wear properties. The purpose of this study is to determine if there is evidence of subsurface microhardness changes in retrieved HXLPE liner at the rim and articular subsurface after extended in vivo time that could be associated with oxidation and its effects on mechanical properties and implant integrity. Retrieved HXLPE liners were chosen based on peak subsurface Fourier transform infrared spectroscopy oxidation values. Each was mechanically tested for subsurface microhardness at both the rim and articular surface using a validated microindentation technique. Rim testing demonstrated a decrease in mechanical integrity that corresponded to higher subsurface oxidation values regardless of the free-radical stabilization technique. At the articular surface, a decrease in mechanical integrity was observed near the surface corresponding to peak oxidation and Vicker's hardness, which decreased with increasing depths. This was found in all groups, with the exception of the single-annealed liners, which demonstrated decreased mechanical integrity trends at greater depths between 1.0 and 2.0 mm. Our results suggest that subsurface mechanical properties do change in vivo for certain implants. Though it is likely that the mechanical failures are multifactorial, we have shown that mechanical property degradation of HXLPE liners does occur with long-term in vivo exposure and should be considered a possible risk factor.

Highly cross-linked polyethylene (HXLPE) liners have been developed to address the wear-related problems associated with conventional polyethylene (CPE) such as osteolysis or aseptic loosening in total hip arthroplasty (THA). In this systematic meta-analysis, we compared the long-term efficacy in preventing radiological osteolysis and revision surgery between HXLPE and CPE.

We included 14 studies that compared HXLPE and CPE reporting the incidence of wear-related complications with a minimum follow-up of 10 years. We investigated 5 wear-related complications: osteolysis, excessive wear, linear wear rate, revision surgery due to wear, and progress of osteolysis/aseptic loosening. We conducted a pair-wise meta-analysis to estimate odds ratio (OR) and a proportional meta-analysis to estimate the incidence of each complication.

Among 1,175 THAs, 220 osteolysis and 78 wear-related revisions were detected. The use of HXLPE reduced the risk of overall osteolysis (OR 0.30; P = .001), excessive wear (OR 0.10; P < .001), linear wear rate (weighted mean difference 0.09; P < .001), the risk of overall wear-related revisions (OR 0.06; P < .001), and revisions due to aseptic loosening (OR 0.23; P = .015). As per the proportional meta-analysis, the pooled prevalence of osteolysis, excessive wear, and the overall wear-related revision rate were 14%, 8%, and 3% in HXLPE and 25%, 33%, and 20% in CPE, respectively.

The current evidence shows that HXLPE dramatically reduced the rate of osteolysis and wear-related revision surgery. However, as polyethylene wear and osteolysis still lead to revision surgery, ongoing clinical and retrieval studies are required to analyze long-term outcomes.

Conventional polyethylene (CPE) was used widely in the past as a bearing surface in total hip arthroplasty (THA). As CPE THAs age and the revision burden continues to grow, it is increasingly important to understand the durability and failure mechanisms of this bearing material. Currently, such long-term data remain limited, particularly in younger, more active patients in whom wear issues are of greater concern.

We retrospectively reviewed 90 hips (77 patients) that underwent primary THA with CPE bearings on cobalt chrome femoral heads at age ≤50 years at 20-year minimum follow-up (mean 21.6 [20-23]). We analyzed polyethylene wear rates, clinical outcomes (modified Harris Hip Score, University of California, Los Angeles Activity Score), and implant survivorship.

Wear analysis revealed a median linear wear rate of 0.113 mm/y (95% CI 0.102-0.148) and a median volumetric wear rate of 41.20 mm³/y (95% CI 43.5-61.0). Modified Harris Hip Scores remained 37 points above preoperative baseline (P < .001) and University of California, Los Angeles scores 1.4 points above baseline (P = .018) at 21.6-year mean follow-up. Twenty-nine hips (32.2%) were revised, 20 of which (22.2%) were wear-related at a median of 15.4 years (interquartile range 11.4-19.5). Survivorship free from wear-related revision was 95.6% (95% CI 88.7-98.3), 87.9% (78.6-93.3), 78.1% (49.6-66.5), and 61.1% (41.3-67.0) at 10, 15, 20, and 25 years.

Wear-related issues developed at increasingly high rates after 15 years, suggesting the need for surveillance after this time. The long-term wear and survivorship data of this study may be used as a benchmark when evaluating the performance of contemporary bearings in young, active THA patients.

Over the past 15 years, numerous studies have been conducted on the use of nanocarbons as biomaterials towards such applications as drug delivery systems, cancer therapy, and regenerative medicine. However, the clinical use of nanocarbons remains elusive, primarily due to short- and long-term safety concerns. It is essential that the biosafety of each therapeutic modality be demonstrated in logical and well-conducted experiments. Accordingly, the fundamental techniques for assessing nanocarbon biomaterial safety have become more advanced. Optimal controls are being established, nanocarbon dispersal techniques are being refined, the array of biokinetic evaluation methods has increased, and carcinogenicity examinations under strict conditions have been developed. The medical implementation of nanocarbons as a biomaterial is in sight. With a particular focus on carbon nanotubes, these perspectives aim to summarize the contributions to date on nanocarbon applications and biosafety, introduce the recent achievements in evaluation techniques, and clarify the future prospects and systematic introduction of carbon nanomaterials for clinical use through practical yet sophisticated assessment methods.

Hip replacements are common and effective operations but patients that undergo this intervention are at risk of the replacements failing, requiring costly and often complex revision surgery with poorer outcomes than primary surgery. There is paucity of reliable data examining the treatment pathway for hip replacements over the life of the patient in terms of risk of revision and re-revisions. We aim to provide detailed information on the longevity of hip revision surgery.

We did a retrospective observational registry-based study of the National Joint Registry, using data on hip replacements from all participating hospitals in England and Wales, UK. We included data on all first revisions, with an identifiable primary procedure, with osteoarthritis as the sole indication for the original primary procedure. Kaplan-Meier estimates were used to determine the cumulative probability of revision and subsequent re-revision after primary hip replacement. Analyses were stratified by age and gender, and the influence of time from first to second revision on the risk of further revision was explored.

Between April 1, 2003, and Dec 31, 2019, there were 29 010 revision hip replacements with a linked primary episode. Revision rates of revision hip replacements were higher in patients younger than 55 years than in older age groups. After revision of primary total hip replacement, 21·3% (95% CI 18·6-24·4) of first revisions were revised again within 15 years, 22·3% (20·3-24·4) of second revisions were revised again within 7 years, and 22·3% (18·3-27·0) of third revisions were revised again within 3 years. After revision of hip resurfacing, 23·7% (95% CI 19·6-28·5) of these revisions were revised again within 15 years, 21·0% (17·0-25·8) of second revisions were revised again within 7 years, and 19·3% (11·9-30·4) of third revisions were revised again within 3 years. A shorter time between revision episodes was associated with earlier subsequent revision.

Younger patients are at an increased risk of multiple revisions. Patients who undergo a revision have a steadily increasing risk of further revision the more procedures they undergo, and each subsequent revision lasts for approximately half the time of the previous one. Although hip replacements are effective for improving pain and function and usually last a remarkably long time, if they are revised, successive revisions are progressively and markedly less successful.

NIHR Biomedical Research Centre at the University Hospitals Bristol and Weston NHS Foundation Trust and the University of Bristol, Healthcare Quality Improvement Partnership; and the National Joint Registry.

Characterizations and factors influencing longer term performance of second-generation sequentially irradiated and annealed highly cross-linked polyethylene (HXLPE) are lacking. We evaluated patients who underwent total hip arthroplasty with HXLPE at mean 10-year follow-up for (1) linear and volumetric wear rates, (2) patient and implant characteristics, (3) implant survivorships, and (4) functional scores.

We evaluated 130 hips (110 patients) that received HXLPE acetabular liners at a single center. The mean age was 56 years (range, 20-79 years), with a mean follow-up of 10 years (range, 8-15). Radiographic linear (millimeters/year) and volumetric (cubic millimeters/year) wear rates were quantified using radiographic analysis. Survivorship was assessed by all-cause and wear-related revision rates. Functional outcomes were assessed by Short Form 12 and modified Harris Hip Scores.

The mean linear wear rate was 0.02 ± 0.03 mm/y, and the mean volumetric wear rate was 12.6 ± 5.3 mm³/y. Younger age had higher volumetric wear (total and yearly, P = .01). Increasing body mass index trended toward higher total and yearly linear (both, P ≤ .09) and volumetric wear (both, P ≤ .07). Ten patients required revisions, with an all-cause survivorship of 92% and a wear survivorship of 100%. The mean modified Harris Hip Scores was 84, and the mean Short Form 12 scores were 46 (physical) and 55 (mental).

We observed low linear and volumetric wear rates for HXLPE at 10-year mean follow-up. Younger age and higher body mass index at the time of surgery may be important patient characteristics influencing long-term wear. These results illustrate the potential for this second-generation HXLPE to be an appropriate long-term total hip arthroplasty interface.

Survivorship of total hip arthroplasty (THA) in younger patients is concerning given the inverse relationship between age and lifetime risk for revision. The purpose of this study is to determine if risk of revision has improved for patients aged 55 years or younger who undergo primary THA using modern polyethylene liners.

A retrospective review identified 2,461 consented patients (2,814 hips) with minimum 2-year follow-up who underwent primary THA at our institution between September 2007 and August 2014 using components from a single manufacturer (Zimmer Biomet), all with vitamin E-infused highly crosslinked polyethylene acetabular inserts. There were 561 patients (643 THA; 23%) aged 55 or younger and 1,900 (2,171 THA; 77%) older than 55.

Mean follow-up was 5.0 years for both groups. There were more male patients in the younger (55%) than older (41%) group. Body mass index (BMI) was higher in younger patients independent of gender. Improvement in Harris hip score (HHS) was similar between groups. Kaplan-Meier survival to endpoint of all cause revision was similar between groups at 12 years (P = .8808) with 97.5% (95% CI: ±0.7%) for younger versus 97.1% (95% CI: ±0.6%) for older patients. Most frequent reason for revision overall was periprosthetic femoral fracture (21; 0.75%); univariate analysis revealed risk factors were female gender (P = .28) and age ≥65 years (P = .012).

Use of modern polyethylene, such as vitamin E-stabilized highly cross-linked, liners during THA may improve survivorship in younger patients undergoing THA. Younger patients undergoing primary THA with highly cross-linked polyethylene liners had no increased rate of revision at mid-term follow-up.

Dual mobility (DM) bearings for total hip arthroplasty (THA) have been proposed to reduce the risk of instability in high-risk patients; however, their utility in primary THA remains relatively unexplored. No previous reports have described whether surgical approach influences outcomes associated with DM implant systems. This study aims to compare patient reported outcomes and post-operative groin pain between patients undergoing anterior approach versus posterior approach following primary THA with DM implants.

We retrospectively reviewed all patients who underwent primary THA and received a DM implant between 2011-2021. Patients were stratified into two cohorts based on surgical approach (anterior vs. posterior approach). Primary outcomes included the presence of substantial postoperative groin pain as well as readmission and revision rates. Demographic differences were assessed using chi-square and independent sample t-tests. Outcomes were compared using multilinear and logistic regressions.

Of the 495 patients identified, 55 (11%) underwent THA via the anterior approach and 440 (89%) via the posterior approach. Surgical time (100.24 vs. 109.42 minutes, p=0.070), length of stay (2.19vs.2.67 days,p=0.072), discharge disposition (p=0.151), and significant postoperative groin pain (1.8%vs.0.7%,p=0.966) did not statistically differ between the cohorts. 90-day readmission (9.1%vs.7.7%,p=0.823) and revision rate (0.0%vs.3.0%,p=0.993) did not significantly differ as well. Specifically, readmission (p=0.993) and revision (p=0.998) for instability did not significantly differ between the cohorts. We found no statistical difference in HOOS, JR (p=0.425), VR-12 PCS (p=0.718), and VR-12 MCS (p=0.257) delta score improvement from preoperative to 1-year follow-up between the two groups.

Comparable outcomes following implantation of DM constructs may be achievable irrespective of the surgical approach employed. The incidence of iliopsoas injections for groin pain did not significantly differ between anterior and posterior approaches. Future investigation is needed to determine whether surgical approach influences long-term outcomes in patients receiving DM implants. Level of Evidence: III.

Primary total hip arthroplasty (THA) is an invaluable surgical procedure that has revolutionised the treatment of various end-stage hip pathologies. Aseptic loosening of either acetabular cup and/or femoral stem as well as components' dislocation are well-known post-operative complications due to so many factors: environmental, surgeon, patient related, disease related or implant design. The aim of this literature review is to look at some relevant implant designs that might influence acetabular and femoral components' survival for primary cementless THA using revision for aseptic loosening and dislocation as criteria for failure. This may also assist the surgeon in making an informed choice of using appropriate implants to match the demographic and disease-specific need of the patients undergoing the surgical procedure. This review article was performed using an online literature search on relevant publications.

Introduction of new implants should be monitored closely to capture any signs of compromising patient safety. Vitamin E infused highly-crosslinked polyethylene liners (VEPE) offer the potential for reduced wear. Highwall liners have been hypothesised to result in increased wear and potential liner fractures. The aim of this study was to determine the 3-7-year follow-up of highwall VEPE for primary total hip arthroplasty (THA), focusing on liner-related complications.

We included 1221 consecutive THA operations from July 2010 to May 2014 with minimum follow-up of 3 (3.1-6.8) years Data collected included demographics, implant data, complications, reoperations, and deaths. Data were cross-referenced with the Danish Hip Arthroplasty Registry in order to ensure validity and completeness. Acetabular shell position was measured using Martell Hip Analysis Suite in a subgroup of 931 THAs.

Cumulative stem revision and shell revision at 3-year follow-up was 3.4% and 0.4% respectively. There were no revisions due to liner failure. Reason for revision included 11 dislocations, 15 soft-tissue revisions for infection, 44 stem revisions of which 34 were periprosthetic fractures and 13 shell revisions of which 6 were combined shell and stem revisions.

Early follow-up of VEPE liners for primary THA have not shown any revisions associated with liner failure. Continued monitoring of new materials are necessary to capture any signs of compromised patient safety.

Prolonged muscle weakness after total hip arthroplasty (THA) remains a problem. Despite increasing physical activity up to 3 years after surgery, muscle strength was decreased to 80-90% of the healthy side 2 years after THA. The objective of the present study was to identify the nutritional factors related to muscle weakness 1 year after THA.

Persons who underwent THA were divided into 2 groups according to the cutoff point of knee extensor strength that represents functional limitation: a normal-strength group of 71 persons and a muscle weakness group of 91 persons. The investigators assessed lower limb isometric strength, the 10-m timed gait test, and daily intakes of energy and nutrients from preoperative to 1 year after THA. The differences in nutrient intakes between the 2 groups (normal-strength group and muscle weakness group) were examined by multiple logistic regression analysis.

There was a significant difference between the groups in energy intake. Daily protein intake was related to knee extension strength gain above the cutoff point 1 year after THA.

The present study suggested that to prevent prolonged muscle weakness after THA, a sufficient protein intake as well as an exercise intervention may be needed even half a year or after.

The benefits of HXLPE in total knee arthroplasty (TKA) have not been as evident as total hip arthroplasty (THA). A systematic review and meta-analysis to assess the impact of highly-crosslinked polyethylene (HXLPE) on TKA outcomes compared to conventional polyethylene (CPE) is described.

All studies comparing HXLPE with CPE for primary TKA were included for analysis. The minimum dataset included revision rates, indication for revision, aseptic component loosening and follow-up time. The primary outcome variables were all-cause revision, aseptic revision, revision for loosening, radiographic component loosening, osteolysis and incidence of radiolucent lines. Secondary outcome measures included postoperative functional knee scores. A random-effects meta-analysis allowing for all missing data was performed for all primary outcome variables.

Six studies met the inclusion criteria. In total, there were 2,234 knees (1,105 HXLPE and 1,129 CPE). The combined mean follow-up for all studies was 6 years. The aseptic revision rate in the HXLPE group was 1.02% compared to 1.97% in the CPE group. There was no difference in the rate of all-cause revision (p = 0.131), aseptic revision (p = 0.298) or revision for component loosening (p = 0.206) between the two groups. Radiographic loosening (p = 0.200), radiolucent lines (p = 0.123) and osteolysis (p = 0.604) was similar between both groups. Functional outcomes were similar between groups.

The use of HXLPE in TKA yields similar results for clinical and radiographic outcomes when compared to CPE at midterm follow-up. HXLPE does not confer the same advantages to TKA as seen in THA.

The purpose of this study is to evaluate trends in the use of total hip arthroplasty (THA) in the United States in patients under 21 years of age. Specifically, we examined the frequency of THA in this patient population over the past 2 decades, the epidemiologic characteristics of patients under 21 who underwent THA, and the characteristics of the hospitals where these procedures were performed.

We retrospectively reviewed the Kids' Inpatient Database, an inpatient US national weighted sample of hospital admissions in patients under 21 from approximately 4200 hospitals in 46 states. We queried the database using Current Procedural Terminology codes for elective and non-elective primary THA for the years 2000-2016. We utilized the International Classification of Diseases, Ninth Revision and International Classification of Diseases, Tenth Revision codes to determine primary diagnoses.

The weighted total number of THAs performed in patients under 21 in the Kids' Inpatient Database increased from 347 in 2000 to 551 in 2016. The most common diagnoses were osteonecrosis, osteoarthritis, and inflammatory arthritis. The frequency of THA for osteonecrosis increased from 24% in 2000 to 38% in 2016, while the frequency of THA for inflammatory arthritis decreased from 27% in 2000 to 4% in 2016.

The number of THAs in patients under 21 in the United States has increased over the past 2 decades and these procedures are increasingly performed in urban teaching hospitals. The decrease in THA for inflammatory arthritis in this population likely reflects improvements in medical management during the study period.

We aimed to evaluate the long-term outcome of highly cross-linked polyethylene (HXLPE) cemented acetabular components and assess whether any radiolucent lines (RLLs) which arose were progressive.

We retrospectively reviewed 170 patients who underwent 187 total hip arthroplasties at two hospitals with a minimum follow-up of ten years. All interventions were performed using the same combination of HXLPE cemented acetabular components with femoral stems made of titanium alloy. Kaplan-Meier survival analysis was performed for the primary endpoint of acetabular component revision surgery for any reason and secondary endpoint of the appearance of RLLs. RLLs that had appeared once were observed over time. We statistically assessed potential relationships between RLLs and a number of factors, including the technique of femoral head autografting and the Japanese Orthopaedic Association score.

The mean follow-up period was 13.0 years (10.0 to 16.3). Femoral head autografting was performed on 135 hips (72.2%). One acetabular component was retrieved because of deep infection. No revision was performed for the aseptic acetabular loosening. The Kaplan-Meier survival curve for the primary and secondary endpoints were 98.2% (95% confidence interval (CI) 88.6% to 99.8%) and 79.3% (95% CI 72.8% to 84.6%), respectively. RLLs were detected in 38 hips (21.2%), at a mean of 1.7 years (1 month to 6 years) postoperatively. None of the RLLs were progressive, and the presence of RLLs did not show a significant association with the survival and clinical score. RLLs were more frequently observed in hips without femoral head autografts than in those with autografts.

The use of HXLPE cemented acetabular components in total hip arthroplasty demonstrated excellent clinical outcomes after ten years, and no RLLs were progressive, and their presence did not affect the outcome. Femoral head autografting did not negatively impact the acetabular component survival or the appearance of RLLs. Cite this article: Bone Joint J 2021;103-B(10):1604-1610.

Numerous thermal free radical stabilization techniques are used in the production of highly cross-linked polyethylene (HXLPE) to improve oxidative stability. Little knowledge exists on the effects of in vivo time on the mechanical properties of HXLPE. The purpose of this study was to determine if free radical stabilization of HXLPE impacts mechanical properties as well as oxidative stability of acetabular liner rims after extended in vivo time.

Retrieved and control remelted, single annealed and sequentially annealed HXLPE liner rims were tested for mechanical properties. Oxidation was measured with FTIR spectroscopy and crystalline phase composition measured with Raman spectroscopy.

No correlation was found between in vivo, ex vivo time and hardness for annealed groups. A statistically significant difference in hardness was identified between free radical stabilization groups. No correlation between maximum rim oxidation and in vivo time was found. Detectable levels of rim oxidation were present in 100% of single annealed, 75% of sequentially annealed, and 25% of remelted retrieved liners. Single and sequentially annealed liners demonstrated oxidation and increased crystallinity. Rim mechanical properties change in vivo for implant types. With in vivo time, retrieved remelted HXLPE demonstrated decreased mechanical properties, whereas retrieved single and sequentially annealed HXLPE properties remained stable. All liner cohorts demonstrated evidence of rim oxidation. Subsequent changes in crystallinity were only observed in oxidized annealed liners.

HXLPE acetabular liner rims show evidence of in vivo mechanical property degradation, notably in remelted HXLPE, which may be a risk factor in rim fracture and catastrophic implant failure.