Globally, nearly half of all pregnancies are unintended, ∼1.3 million new human immunodeficiency virus (HIV) infections are reported every year, and more than 500 million people are estimated to have a genital herpes simplex virus (HSV-2) infection. Here we report the first 3D printed multipurpose prevention technology (MPT) intravaginal ring (IVR) for prevention of HIV, HSV-2, and unintended pregnancy. The IVRs were fabricated using state-of-the-art Continuous Liquid Interface Production (CLIP™) 3D printing technology using a biocompatible silicone-urethane based resin. Anti-HIV drug (Dapivirine, DPV), anti-herpes drug (Pritelivir, PTV) and a contraceptive drug (Levonorgestrel, LNG) were loaded in a macaque size IVR (25 mm outer diameter, OD; 6.0 mm cross-section, CS) allometrically scaled from the human size (54 mm OD; 7.6 mm CS) IVR analogue. All three active pharmaceutical ingredients (APIs) were loaded in the IVR using a single-step drug loading process driven by absorption. DPV, PTV, and LNG elicited zero-order release kinetics in vitro in simulated vaginal fluid (SVF) at pH 4 and pH 8 relevant to human and macaque vaginal pH respectively. CLIP 3D printed MPT IVRs remained stable after 6 months of storage at 4 °C with no change in physical, dimensional, or mechanical properties and no change in drug concentration and absence of drug degradation byproducts. The MPT IVRs elicited sustained release of all three APIs in macaques for 28 days with median plasma concentrations of 138 pg/mL (DPV), 18,700 pg/mL (PTV), and 335 pg/mL (LNG). Safety studies demonstrated that the MPT IVRs were safe and well tolerated in the macaques with no observed change or abnormalities in vaginal pH and no significant changes in any of the 22 mucosal cytokines and chemokines tested including pro-inflammatory (IL-1β, IL-6, IL-8, IFN-γ, TNF-α, IL-17, IL-18) and anti-inflammatory (IL-10, IL-12) cytokines while the MPT IVR was in place or after its removal. Additionally, MPT IVRs elicited no observed alterations in systemic CD4+ and CD8+ T cells during the entire study. Collectively, the proposed MPT IVR has potential to expand preventative choices for young women and girls against unintended pregnancy and two highly prevalent sexually transmitted infections (STIs).

Intravaginal rings (IVRs) represent a well-established, woman-controlled and sustained vaginal drug delivery system suitable for a wide range of applications. Here, we sought to investigate the differences in etonogestrel (ENG) and ethinyl estradiol (EE) release from a 3D-printed IVR utilizing continuous liquid interface production (CLIP™) (referred to as CLIPLOW for low drug loading and CLIPHIGH IVRs for high drug loading) and NuvaRing, a commercially available injection molded IVR. We conducted in vitro release studies in simulated vaginal fluid to compare the release of ENG and EE from CLIPLOW IVRs and NuvaRing. CLIPLOW IVRs had a similar hormone dose to NuvaRing and exhibited slightly slower ENG release and greater EE release in vitro compared to NuvaRing. When administered to female sheep, NuvaRing demonstrated greater ENG/EE levels in plasma, vaginal tissue and vaginal fluids compared to CLIPLOW IVR despite similar drug loadings. Leveraging observed hormones levels in sheep from NuvaRing as an effective contraceptive benchmark, we developed a long-acting CLIPHIGH IVR with increased ENG and EE doses that demonstrated systemic and local hormone levels greater than the NuvaRing for 90 days in sheep. No signs of toxicity were noted regarding general health, colposcopy, or histological analysis in sheep after CLIPHIGH IVR administration. Our results provided (1) a comparison of ENG and EE release between a 3D-printed IVR and NuvaRing in vitro and in vivo, (2) a preclinical pharmacokinetic benchmark for vaginally delivered ENG and EE and (3) the generation of a 90-day CLIP IVR that will be utilized in future work to support the development of a long-acting ENG/EE IVR combined with an antiretroviral for the prevention of HIV and unplanned pregnancy.

To succeed in ending the HIV epidemic in the United States, the Centers for Disease Control and Prevention (CDC) focuses on delivering combinations of scientifically proven, cost-effective, and scalable interventions to priority populations. Systemic factors continue to contribute to persistent health disparities and disproportionately higher rates of HIV diagnosis in some communities. The National HIV/AIDS Strategy has designated cis-gender Black women (CgBW) as a priority population to address the racial and ethnic inequities in HIV. This report presents the portfolio of projects, programs, and initiatives funded by the CDC's Division of HIV Prevention (DHP) to address disparities in HIV and improve health and QOL among CgBW. These funded activities include the development, planning, and implementation of HIV prevention programs, mass media campaigns, and behavioral interventions focused on CgBW. This report also summarizes DHP's community engagement, capacity building, and partnership efforts, and highlights research and surveillance activities focusing on CgBW. Finally, this report outlines future directions for CDC's efforts to improve access to HIV testing, treatment, and prevention for CgBW in the United States.

Bacterial vaginosis (BV) is a common dysbiosis of the human vaginal microbiota characterized by depletion of hydrogen peroxide and lactic acid-producing Lactobacillus bacteria and an overgrowth of certain facultative anaerobic bacteria. Although short-term cure rates following treatment with frontline antibiotics (most notably oral metronidazole (MNZ), clindamycin vaginal cream, and MNZ vaginal gel) are generally high, longer-term recurrence rates are an issue. The development of vaginal formulations offering continuous/sustained administration of antibiotic drugs over one or more weeks might prove useful in reducing recurrence. Here, we report the manufacture and preclinical testing of matrix-type vaginal rings offering sustained release of four 5-nitroimidazole antimicrobial drugs either being used clinically or having potential in treatment of BV - MNZ, tinidazole (TNZ), secnidazole (SNZ) and ornidazole (ONZ). All four drugs showed good compatibility with a medical-grade addition-cure silicone elastomer based upon thermal analysis experiments, and matrix-type rings containing 250 mg (3.125 %w/w) of each drug were successfully manufactured by reaction injection molding. 28-day in vitro drug release studies demonstrated root-time kinetics, with daily release rates of 25, 22, 9 and 6 mg/day½ for SNZ, ONZ, MNZ and TNZ, respectively. The rank order of drug release from rings correlated with the simple molecular permeability parameter S/V, where S is the measured drug solubility in silicone fluid and V is the drug molecular volume. The relative merits of SNZ and ONZ over MNZ (the current reference treatment) are discussed. The data support development of vaginal rings for sustained release of 5-nitroimidazole compounds for treatment of BV.

Three-dimensional printing technologies can be implemented for the fabrication of personalized vaginal rings (VRs) as an alternative approach to traditional manufacturing. Although several studies have demonstrated the potential of additive manufacturing, there is a lack of knowledge concerning the opinions of patients and clinicians. This study aimed to investigate the perception of women and gynecologists regarding VRs with personalized shapes. The devices were printed with different designs (traditional, "Y", "M", and flat circle) by Fused Deposition Modeling for a cross-sectional survey with 155 participants. Their anticipated opinion was assessed through a questionnaire after a visual/tactile analysis of the VRs. The findings revealed that most women would feel comfortable using some of the 3D-printed VR designs and demonstrated good acceptability for the traditional and two innovative designs. However, women presented multiple preferences when the actual geometry was assessed, which directly related to their age, previous use of the vaginal route, and perception of comfort. In turn, gynecologists favored prescribing traditional and flat circle designs. Overall, although there was a difference in the perception between women and gynecologists, they had a positive opinion of the 3D-printed VRs. Finally, the personalized VRs could lead to an increase in therapeutic adherence, by meeting women's preferences.

HIV/AIDS and maternal mortality are the two leading causes of death among women of reproductive age in sub-Saharan Africa. A growing body of research investigates opportunities for multipurpose prevention technologies (MPTs) that prevent unintended pregnancy, HIV, and/or other sexually transmitted infections (STIs) with a single product. More than two dozen MPTs are currently in development, most of them combining contraception with HIV pre-exposure prophylaxis, with or without protection from other STIs. If successful, such MPTs could offer women benefits at multiple levels: greater motivation for effective use; lower product administration burden; accelerated integration of HIV, STI, and reproductive health services; and opportunities to circumvent stigma by using contraception as a "fig leaf" for HIV and/or STI prevention. However, even if women find respite from product burden, lack of motivation, and/or stigma in contraceptive-containing MPTs, their use of MPTs will be interrupted, often multiple times, over the reproductive lifecourse due to desire for pregnancy, pregnancy and breastfeeding, menopause, and changes in risk. Interruptions to the benefits of MPTs could be avoided by combining HIV/STI prevention with other life-stage-appropriate reproductive health products. New product concepts could include combining prenatal supplements with HIV and STI prevention, emergency contraception with HIV post-exposure prophylaxis, or hormone replacement therapies for menopause with HIV and STI prevention. Research is needed to optimize the MPT pipeline based on the populations underserved by available options and the capacity of resource-constrained health systems to deliver novel preventative healthcare products.

Adolescent girls and young women (AGYW), as well as pre- and post-menopausal women globally would benefit from expanded choice to address their sexual and reproductive health (SRH) needs related to Human Immunodeficiency Virus (HIV), sexually transmitted infections (STIs) and pregnancy prevention. Lack of adequate preventative vaccines for HIV/STIs reinforces public health prioritization for options women may use independently to mitigate risk for infectious disease and unplanned pregnancy. Drug releasing intravaginal rings (IVR) represent one such technology that has garnered attention based on the modality's success recently as a pre-exposure prophylaxis (PrEP) delivery option and its impact on reduction in HIV risk.

: This article provides a synopsis of three IVR technologies in active clinical development for prevention of HIV, STI, and unintended pregnancy demonstrating advancements in terms of compatibility with a wide range of drug types with a focus on dapivirine-based silicone rings (International Partnership for Microbicides (IPM), tenofovir-based polyurethane rings (CONRAD), and pod-based rings (Oak Crest Institute of Science).

The goals of IVR research are to reduce burdens of HIV/STIs and unplanned pregnancies. Through the evolution of IVR technologies, the potential exists to trigger integration of healthcare services through formulation of products with multiple indications.

Improving current contraceptives and discover novel methods easy to use with added health benefits would meet the needs of couples who seek alternatives to current methods. New delivery systems target user-controlled, longer-acting options to provide choice, user's autonomy and improve compliance. Self-injections, microarray patches, pod rings able to deliver several molecules aim to prevent both pregnancies and sexually transmitted infections. Improved intrauterine systems and non-surgical permanent methods are also on the research agenda. The search for novel methods must continue, to curb maternal mortality led by multiple pregnancies and unsafe abortion, still a burden in many countries.

Electrospinning is an innovative technique that allows production of nanofibers and microfibers by applying a high voltage to polymer solutions of melts. The properties of these fibers - which include high surface area, high drug loading capacity, and ability to be manufactured from mucoadhesive polymers - may be particularly useful in a myriad of drug delivery and tissue engineering applications. The last decade has witnessed a surge of interest in the application of electrospinning technology for the fabrication of vaginal drug delivery systems for the treatment and prevention of diseases associated with women's sexual and reproductive health, including sexually transmitted infections (e.g. infection with human immunodeficiency virus and herpes simplex virus) vaginitis, preterm birth, contraception, multipurpose prevention technology strategies, cervicovaginal cancer, and general maintenance of vaginal health. Due to their excellent mechanical properties, electrospun scaffolds are also being investigated as next-generation materials in the surgical treatment of pelvic organ prolapse. In this article, we review the latest advances in the field.

The woman's body presents a number of unique anatomical features that can constitute valuable routes for the administration of drugs, either for local or systemic action. These are associated with genitalia (vaginal, endocervical, intrauterine, intrafallopian and intraovarian routes), changes occurring during pregnancy (extra-amniotic, intra-amniotic and intraplacental routes) and the female breast (breast intraductal route). While the vaginal administration of drug products is common, other routes have limited clinical application and are fairly unknown even for scientists involved in drug delivery science. Understanding the possibilities and limitations of women-specific routes is of key importance for the development of new preventative, diagnostic and therapeutic strategies that will ultimately contribute to the advancement of women's health. This article provides an overview on women-specific routes for the administration of drugs, focusing on aspects such as biological features pertaining to drug delivery, relevance in current clinical practice, available drug dosage forms/delivery systems and administration techniques, as well as recent trends in the field.

Worldwide, women face compounding reproductive health risks, including human immunodeficiency virus (HIV), sexually-transmitted infections (STIs), and unintended pregnancy. Multipurpose prevention technologies (MPTs) offer combined protection against these overlapping risks in singular prevention products that offer potential for simplified use, lower burden, higher acceptability, and increased public health benefits. Over the past decade, substantial progress has been made in development of extended-release MPTs, which have further potential to grant sexual and reproductive health autonomy to women globally and to offer choice for women to accommodate varying needs during their reproductive lives. Here, we highlight the advances made in injectable, implant, and ring delivery forms, and the importance of incorporating end-user preferences early in the research and development of these products.

There is a high global prevalence of HIV, sexually transmitted infections (STIs), and unplanned pregnancies. Current preventative daily oral dosing regimens can be ineffective due to low patient adherence. Sustained release delivery systems in conjunction with multipurpose prevention technologies (MPTs) can reduce high rates of HIV/STIs and unplanned pregnancies in an all-in-one efficacious, acceptable, and easily accessible technology to allow for prolonged release of antivirals and contraceptives. The concept and development of MPTs have greatly progressed over the past decade and demonstrate efficacious technologies that are user-accepted with potentially high adherence. This review gives a comprehensive overview of the latest oral, parenteral, and vaginally delivered MPTs in development as well as drug delivery formulations with the potential to advance as an MPT, and implementation studies regarding MPT user acceptability and adherence. Furthermore, there is a focus on MPT intravaginal rings emphasizing injection molding and hot-melt extrusion manufacturing limitations and emerging fabrication advancements. Lastly, formulation development considerations and limitations are discussed, such as nonhormonal contraceptive considerations, challenges with achieving a stable coformulation of multiple drugs, achieving sustained and controlled drug release, limiting drug-drug interactions, and advancing past preclinical development stages. Despite the challenges in the MPT landscape, these technologies demonstrate the potential to bridge gaps in preventative sexual and reproductive health care.

Intravaginal rings (IVRs) represent a sustained-release approach to drug delivery and have long been used and investigated for hormones and microbicides delivery. For decades, IVRs have been manufactured by injection molding and hot-melt extrusion with very limited design and material capabilities. Additive manufacturing (AM), specifically digital light synthesis (DLS), represents an opportunity to harness the freedom of design to expand control and tunability of drug release properties from IVRs. We report a novel approach to IVR design and manufacturing that results in geometrically complex internal architectures through the incorporation of distinct unit cells using computationally-aided design (CAD) software. We developed a systematic approach to design through the generation of an IVR library and investigated the effects of these parameters on ring properties. We demonstrate the ability to precisely and predictably control the compressive properties of the IVR independent of the internal architecture with which control of drug release kinetics can be achieved, thus opening the door for a 'plug-and-play' platform approach to IVR fabrication.

Introduction: Multipurpose prevention technologies (MPTs) have the potential to avert multiple concomitant sexual and reproductive health issues in women such as sexually transmitted infections and unintended pregnancy. MPTs incorporate one or more active pharmaceutical ingredients in a single product, which adds more convenience for users and may promote increased adherence. Various vaginal dosage forms/delivery systems have been studied for designing MPTs. However, several challenges remain that are mainly related to requirements of individual drugs or intended multiple applications.Areas covered: This review focuses on the emerging need and development of vaginal MPTs. It illustrates numerous examples that are currently in the preclinical and clinical development pipeline, highlighting the concept behind vaginal MPTs. The article also highlights the challenges associated with formulation design and development, including regulatory issues that need to be addressed.Expert opinion: Vaginal MPTs present great potential to empower women with novel, efficient, and safe products for protection against sexually transmitted infections and unintended pregnancy. However, several technological issues and regulatory gaps still need to be addressed in order to meet real-world needs.

Drug-releasing vaginal rings are torus-shaped devices, generally fabricated from thermoplastic polymers or silicone elastomers, used to administer pharmaceutical drugs to the human vagina for periods typically ranging from three weeks to twelve months. One of the most important product performance tests for vaginal rings is the in vitro release test. Although it has been fifty years since a vaginal ring device was first described in the scientific literature, and despite seven drug-releasing vaginal rings having been approved for market, there is no universally accepted method for testing in vitro drug release, and only one non-compendial shaking incubator method (for the estradiol-releasing ring Estring®) is described in the US Food and Drug Administration's Dissolution Methods Database. Here, for the first time, we critically review the diverse range of test methods that have been described in the scientific literature for testing in vitro release of drug-releasing vaginal rings. Issues around in vitro-in vivo correlation and modelling of in vitro release data are also discussed.

Pre-exposure prophylaxis (PrEP) is a potent HIV prevention strategy, but uptake of daily oral PrEP remains low. This review covers PrEP agents currently available and agents and modalities under investigation.

Injectable ARV preparations have high acceptability among users but are likely to require adherence to 8-week interval injections. Topical microbicide gels and vaginal rings have underperformed by intention-to-treat analyses in efficacy studies, at least in large part due to challenges with adherence and/or sustained use. However, daily oral TDF-FTC also underperformed in randomized, placebo-controlled trials compared to expectations and subsequent real-world pragmatic use. On-demand (2-1-1 dosing strategy for MSM) and injectable PrEP appear to be acceptable among participants in clinical trials. These modalities are particularly compelling alternatives for individuals who either do not want to take a daily medication (both on-demand and injectable) and/or want to take PrEP without a long commitment (on-demand). Emerging modalities such as vaginal films, microneedles, and subdermal implants have numerous advantages but are still in early stages of development.

With a dapivirine-releasing vaginal ring having successfully completed late-stage clinical testing for HIV prevention and currently undergoing regulatory review, there is now growing interest in next-generation multipurpose prevention technologies that seek to combine antiretroviral and contraceptive drugs within a single product. Here, we focus on ongoing efforts to develop a silicone elastomer vaginal ring releasing both dapivirine and levonorgestrel. Specifically, we evaluate various strategies aimed at both better understanding and reducing the tendency of levonorgestrel to bind with the elastomer, including: (i) formulation and post-manufacturing strategies aimed at reducing the extent of levonorgestrel reaction with addition-cure silicone elastomers; (ii) evaluation of a simple silicone system to model the complex elastomer; (iii) use of model compounds representing the enone and ethinyl moieties of levonorgestrel to probe the mode of addition of levonorgestrel to addition-cure silicone elastomers; and (iv) solution and solid-state ¹³C NMR analysis to probe the structural features of the levonorgestrel-silicone system. The results demonstrate that both the enone and ethinyl groups within levonorgestrel undergo hydrosilylation reactions with the hydrosiloxane groups in the silicone elastomer leading to covalent binding. The results also highlight potential strategies for further optimising the dapivirine + levonorgestrel silicone vaginal ring formulation to ensure that the levonorgestrel is available for release.

Antiretroviral agents (ARVs) have been the most promising line of therapy in the management of human immunodeficiency virus (HIV) infections. Some of these ARVs are used in the pre-exposure prophylaxis (PrEP) to suppress the transmission of HIV. Prophylaxis is primarily used in uninfected people, before exposure, to effectively prevent HIV infection. Several studies have shown that ART PrEP prevents HIV acquisition from sexual, blood and mother-to-child transmissions. However, there are also several challenges and limitations to PrEP. This review focuses on the current antiretroviral therapies used in PrEP.

Among ARVs, the most common drugs employed from the class of entry inhibitors are maraviroc (MVC), which is a CCR5 receptor antagonist. Other entry inhibitors like emtricitabine (FTC) and tenofovir (TFV) are also used. Rilpivirine (RPV) and dapivirine (DPV) are the most common drugs employed from the Non-nucleoside reverse transcriptase inhibitor (NNRTIs) class, whereas, tenofovir disoproxil fumarate (TDF) is primarily used in the Nucleoside Reverse Transcriptase Inhibitor (NRTIs) class. Cabotegravir (CAB) is an analog of dolutegravir, and it is an integrase inhibitor. Some of these drugs are also used in combination with other drugs from the same class.

Some of the most common pre-exposure prophylactic strategies employed currently are the use of inhibitors, namely entry inhibitors, non-nucleoside reverse transcriptase inhibitors, nucleoside reverse transcriptase inhibitors, integrase and protease inhibitors. In addition, we have also discussed on the adverse effects caused by ART in PrEP, pharmacoeconomics factors and the use of antiretroviral prophylaxis in serodiscordant couples.

Young sub-Saharan women are at particularly high risk of HIV acquisition during pregnancy and the postpartum period and would potentially benefit from preexposure prophylaxis (PrEP). From June to August 2016, we interviewed 187 HIV negative pregnant women 18-24 years old in Tugela Ferry, Kwazulu-Natal province, a rural and among the poorest subdistricts in South Africa. Demographic data, HIV and PrEP knowledge, HIV risk, and readiness for oral tenofovir-based PrEP were collected using an information-motivation-behavior model-formatted instrument. Mean age was 20.3 years, 179 (95.7%) were unemployed, and 137 (73.3%) reported sex with one partner in the last month. Most were concerned that their sexual partner (95.2%) potentially had HIV or had other sexual partners in the last month (36.4%). Despite this, only 7 (3.7%) women reported that condoms had been used consistently during sex; most (97.3%) felt powerless to negotiate condom use with their partner. There was widespread interest in taking PrEP (97.3%), and most women (>97%) reported possessing the skills to take pills regularly, would commit to monthly visits, and were motivated to remain HIV negative to take care of their families. Young pregnant rural South African women are cognizant of their HIV risk and interested in prevention. Impending motherhood may portend increased interest in HIV prevention. We identified three potential obstacles to successful PrEP rollout among young pregnant women: hesitation about PrEP effectiveness (46%), perceived HIV stigma (53.5%), and risk compensation through decreased condom use (9.6%). Comparative studies of motivations, skills, and rates of initiation and adherence among pregnant and nonpregnant women are needed to inform optimal implementation efforts.

One of the major factors contributing to HIV-1 drug resistance is suboptimal adherence to combination antiretroviral therapy (cART). Currently, recommended cART for HIV-1 treatment is a three-drug combination, whereas the pre-exposure prophylaxis (PrEP) regimens consist of one or two antivirals. Treatment regimens require adherence to a once or twice (in a subset of patients) daily dose. Long-acting formulations such as injections administered monthly could improve adherence and convenience, and thereby have potential to enhance the chances of expected outcomes, although long-lasting drug concentrations can also contribute to clinical issues like adverse events and development of drug resistance. Globally, two long-acting antivirals have been approved, and fifteen are in clinical trials. More than half of investigational long-acting antivirals target HIV-1 reverse transcriptase (HIV-1 RT) and/or integrase (HIV-1 IN). Here, we discuss the status and potential of long-acting inhibitors, including rilpivirine (RPV), dapivirine (DPV), and 4-ethynyl-2-fluoro-2-deoxyadenosine (EFdA; also known as MK-8591), which target RT, and cabotegravir (CAB), which targets IN. The outcomes of various clinical trials appear quite satisfactory, and the future of long-acting HIV-1 regimens appears bright.

Electrospun fibers have emerged as a relatively new delivery platform to improve active agent retention and delivery for intravaginal applications. While uniaxial fibers have been explored in a variety of applications including intravaginal delivery, the consideration of more advanced fiber architectures may offer new options to improve delivery to the female reproductive tract. In this review, we summarize the advancements of electrospun coaxial, multilayered, and nanoparticle-fiber architectures utilized in other applications and discuss how different material combinations within these architectures provide varied durations of release, here categorized as either transient (within 24 h), short-term (24 h to one week), or sustained (beyond one week). We seek to systematically relate material type and fiber architecture to active agent release kinetics. Last, we explore how lessons derived from these architectures may be applied to address the needs of future intravaginal delivery platforms for a given prophylactic or therapeutic application. The overall goal of this review is to provide a summary of different fiber architectures that have been useful for active agent delivery and to provide guidelines for the development of new formulations that exhibit release kinetics relevant to the time frames and the diversity of active agents needed in next-generation multipurpose applications.

Antiretroviral-releasing vaginal rings are at the forefront of ongoing efforts to develop microbicide-based strategies for prevention of heterosexual transmission of the human immunodeficiency virus (HIV). However, traditional ring designs are generally only useful for vaginal administration of relatively potent, lipophilic, and small molecular weight drug molecules that have sufficient permeability in the non-biodegradable silicone elastomer or thermoplastic polymers. Here, we report a novel, easy-to-manufacture 'exposed-core' vaginal ring that provides sustained release of the protein microbicide candidate 5P12-RANTES, an experimental chemokine analogue that potently blocks the HIV CCR5 coreceptor. In vitro release, mechanical, and stability testing demonstrated the utility and practicality of this novel ring design. In a sheep pharmacokinetic model, a ring containing two ¼-length excipient-modified silicone elastomer cores - each containing lyophilised 5P12-RANTES and exposed to the external environment by two large windows - provided sustained concentrations of 5P12-RANTES in vaginal fluid and vaginal tissue between 10 and 10,000 ng/g over 28days, at least 50 and up to 50,000 times the reported in vitro IC50 value.

Intravaginal rings (IVRs) for HIV pre-exposure prophylaxis (PrEP) theoretically overcome some adherence concerns associated with frequent dosing that can occur with oral or vaginal film/gel regimens. An innovative pod-IVR, composed of an elastomer scaffold that can hold up to 10 polymer-coated drug cores (or "pods"), is distinct from other IVR designs as drug release from each pod can be controlled independently. A pod-IVR has been developed for the delivery of tenofovir (TFV) disoproxil fumarate (TDF) in combination with emtricitabine (FTC), as daily oral TDF-FTC is the only Food and Drug Administration (FDA)-approved regimen for HIV PrEP. A triple combination IVR building on this platform and delivering TDF-FTC along with the antiretroviral (ARV) agent maraviroc (MVC) also is under development.

This pilot Phase I trial conducted between June 23, 2015, and July 15, 2016, evaluated the safety, pharmacokinetics (PKs), and acceptability of pod-IVRs delivering 3 different ARV regimens: 1) TDF only, 2) TDF-FTC, and 3) TDF-FTC-MVC over 7 d. The crossover, open-label portion of the trial (N = 6) consisted of 7 d of continuous TDF pod-IVR use, a wash-out phase, and 7 d of continuous TDF-FTC pod-IVR use. After a 3-mo pause to evaluate safety and PK of the TDF and TDF-FTC pod-IVRs, TDF-FTC-MVC pod-IVRs (N = 6) were evaluated over 7 d of continuous use. Safety was assessed by adverse events (AEs), colposcopy, and culture-independent analysis of the vaginal microbiome (VMB). Drug and drug metabolite concentrations in plasma, cervicovaginal fluids (CVFs), cervicovaginal lavages (CVLs), and vaginal tissue (VT) biopsies were determined via liquid chromatographic-tandem mass spectrometry (LC-MS/MS). Perceptibility and acceptability were assessed by surveys and interviews. Median participant age was as follows: TDF/TDF-FTC group, 26 y (range 24-35 y), 2 White, 2 Hispanic, and 2 African American; TDF-FTC-MVC group, 24.5 y (range 21-41 y), 3 White, 1 Hispanic, and 2 African American. Reported acceptability was high for all 3 products, and pod-IVR use was confirmed by residual drug levels in used IVRs. There were no serious adverse events (SAEs) during the study. There were 26 AEs reported during TDF/TDF-FTC IVR use (itching, discharge, discomfort), with no differences between TDF alone or in combination with FTC observed. In the TDF-FTC-MVC IVR group, there were 12 AEs (itching, discharge, discomfort) during IVR use regardless of attribution to study product. No epithelial disruption/thinning was seen by colposcopy, and no systematic VMB shifts were observed. Median (IQR) tenofovir diphosphate (TFV-DP) tissue concentrations of 303 (277-938) fmol/10(6) cells (TDF), 289 (110-603) fmol/10(6) cells (TDF-FTC), and 302 (177.1-823.8) fmol/10(6) cells (TDF-FTC-MVC) were sustained for 7 d, exceeding theoretical target concentrations for vaginal HIV prevention. The study's main limitations include the small sample size, short duration (7 d versus 28 d), and the lack of FTC triphosphate measurements in VT biopsies.

An innovative pod-IVR delivery device with 3 different formulations delivering different regimens of ARV drugs vaginally appeared to be safe and acceptable and provided drug concentrations in CVFs and tissues exceeding concentrations achieved by highly protective oral dosing, suggesting that efficacy for vaginal HIV PrEP is achievable. These results show that an alternate, more adherence-independent, longer-acting prevention device based on the only FDA-approved PrEP combination regimen can be advanced to safety and efficacy testing.

ClinicalTrials.gov NCT02431273.

This work investigates the impact of vaginal ring size and drug loading on the in vitro release, safety, ease of fit, and pharmacokinetics in cynomolgus macaques of matrix-type silicone elastomer vaginal rings containing a combination of the non-nucleoside reverse transcriptase inhibitor dapivirine and the protease inhibitor darunavir. Drug-free and drug-loaded vaginal rings having three different geometries were manufactured by reaction injection molding. In vitro drug release was assessed using both a solvent/water mixture and a vaginal fluid simulant. Macaques fitted with drug-free vaginal rings for 28 days were assessed by colposcopy, cytological evaluation of cervico-vaginal lavage and histological evaluation of tissue after ring removal. The 20 × 4.5 mm combination ring, deemed most appropriate for vaginal fit and comfort in the macaques, was evaluated for pharmacokinetics over 28 days. Substantial differences were observed in the in vitro release profiles between the three ring sizes. However, these differences were not manifest in vivo, where measured drug concentrations after 20 × 4.5 mm ring use were not significantly different from those reported previously with a 25 × 6 mm ring. These results suggest that ring placement and fit is an important species-specific study parameter that should be optimised prior to pharmacokinetic testing.

Although highly active antiretroviral therapies (HAART) remarkably increased life expectancy of HIV positive people, the rate of novel HIV-1 infections worldwide still represent a major concern. In this context, pre-exposure prophylaxis (PrEP) approaches such as vaginal microbicide gels topically releasing antiretroviral drugs, showed to have a striking impact in limiting HIV-1 spread. Nevertheless, the co-presence of other genital infections, particularly those due to HSV-1 or 2, constitute a serious drawback that strongly limits the efficacy of PrEP approaches. For this reason, combinations of different compounds with mixed antiviral and antiretroviral activity are thoroughly investigated Here we report the synthesis and the biological evaluation of a novel series of rhodanine derivatives, which showed to inhibit both HIV-1 and HSV-1/2 replication at nanomolar concentration, and were found to be active also on acyclovir resistant HSV-2 strains. The compounds showed a considerable reduction of activity in presence of serum due to a high binding to serum albumin, as determined through in vitro ADME evaluations. However, the most promising compound of the series maintained a considerable activity in gel formulation, with an EC50 comparable to that obtained for the reference drug tenofovir. Moreover, the series of compounds showed pharmacokinetic properties suitable for topical formulation, thus suggesting that the novel rhodanine derivatives could represent effective agents to be used as dual anti HIV/HSV microbicides in PrEP approaches.