A selective and sensitive fluorescence method for hypochlorite (ClO-) was designed using glutathione (GSH) modified silicon-doped carbon quantum dots (GSH@Si-CDs). Then a dual emission ratio fluorescence probe (RF-probe) was obtained based on carbodiimide-activated coupling reaction between GSH and Si-CDs. i.e., when the excitation wavelength was kept at 360 nm, the GSH@Si-CDs exhibited strong blue and weak yellow fluorescence at 430 and 580 nm. Meanwhile, the fluorescence of GSH@Si-CDs could be selectively quenched at 430 nm and enhanced at 580 nm in the presence of ClO-, and corresponding limit of detection (LOD) and linear range were measured to be 0.35 µM and 1.0-33.3 µM. The sensing mechanism of the system was also investigated in detail. Moreover, the RF-probe with good accuracy was successfully employed to monitor ClO- in real samples with satisfactory results compared to the standard iodometric method.

In this study, a ratiometric fluorescence nanoprobe is developed for the analysis of hydrogen peroxide (H2O2). Silver nanoclusters (AgNCs) were synthesized by chemical reduction method using sodium borohydride (NaBH4) as reducing agent, and were coupled with CdSe/ZnS quantum dots (QDs) to form the ratiometric fluorescence nanoprobe silver nanoclusters-quantum dots (AgNCs-QDs). The effect of the volume ratio of CdSe/ZnS QDs to AgNCs on the fluorescence ratio of AgNCs-QDs was investigated. The fluorescence characterization results show that two emission peaks of AgNCs-QDs are located at 473 nm and 661 nm, respectively. Transmission electron microscope (TEM) and X-ray photoelectron spectroscopy (XPS) results show that H2O2 can cause the fluorescence probe to aggregate, while etching AgNCs to produce silver ions, which together cause the fluorescence of the QDs in the ratiometric fluorescent probe to be quenched. Based on this strategy, the fluorescence intensity ratio of the two emission peaks F473/F661 exhibits a strong linear correlation with the concentration of H2O2. The detection range is 3.32 µM ~ 2.65 mM with a detection limit of 3.32 µM. In addition, the ratiometric fluorescence probe can specifically recognize H2O2 and has excellent anti-interference performance and good fluorescence stability. Importantly, the probe was utilized for the detection of H2O2 in serum, showing the possibility of the probe in clinical detection applications.

The resulting antibiotic residue and organic chemicals from continuous climatic change, urbanization and increasing food demand have a detrimental impact on environmental and human health protection. So, we created a unique B, N-CQDs (Boron, Nitrogen doping carbon quantum dots) based fluorescent nanosensor to investigate novel sensing methodologies for the precise and concentrated identification of antibiotics and phenol derivatives substances to ensure that they are included in the permitted percentages. The as-prepared highly fluorescent B, N-CQDs had a limited range of sizes between 1 and 6 nm and average sizes of 2.5 nm in our study. The novel B, N-CQDs showed high sensitivity and selectivity for phenolic derivatives such as hydroquinone, resorcinol, and para aminophenol, as well as organic solvents such as hexane, with low detection limits of 0.05, 0.024, 0.032 and 0.013 µM respectively in an aqueous medium. The high fluorescence B, N-CQDs probes were examined using transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and UV/VIS spectroscopy. The outcomes were compared to carbon quantum dots (CQDs) previously generated from Urea.

The ecosystem across the globe has been adversely affected due to the adoption of unsustainable growth strategies. Overuse of organic pollutants such as dyes, pesticides, disinfectants, food additives and antibiotics, along with their release into the environment without proper treatment has severely affected the food chain and water bodies, hence ultimately the human race. As the organic contaminants, being non-biodegradable, persist in the environment for a long duration, a sustainable method for the detection of these harmful organic pollutants is essential. For food safety and restoration of ecological balance, simple, non-toxic, cost-effective and environmentally friendly green precursor derived carbon dots (CDs) are favorable as compared to inorganic nanoparticles (CdTe, CdS etc.) and chemically derived CDs. This review covers the summary of the studies devoted to the optical detection of organic pollutants, food additives and antibiotics through green precursor derived CDs, reported during the last few years. The upcoming studies of optical sensing systems with sustainable CDs provide powerful insight towards pollutant detection, as well as act as a future monitoring tool.