The role of high-pH conditions in anaerobic digestion (AD) has traditionally been confined to it's use in pre-treatment processes. However, operating AD at elevated pH and alkalinity offers significant advantages, including in-situ upgrading of biogas to biomethane. This study examines the potential and scalability of AD under these conditions (pH ∼ 9.3; alkalinity ∼ 0.5 eq/L). The substrate used was the alkaline waste generated from the extraction of extracellular polymeric substances (EPS) from aerobic granular sludge (AGS), and the inoculum used was a haloalkaliphile microbial community from soda lake sediments. To evaluate the system's performance, the organic loading rate (OLR) was incrementally increased. The highest methane production obtained was 8.4 ± 0.1 mL/day/gVSadded at a hydraulic retention time (HRT) of 15 days and an OLR of 1 kgVS/day/m3. At this loading rate, methanogenesis became the rate limiting conversion. The maximum volatile solids conversion was 48.1 ± 1.1 %. Throughout the reactor operation, methane purity in the biogas consistently exceeded 90 % peaking at 96.0 ± 0.2 %, showcasing the potential for in-situ biogas purification under these conditions. In addition, no ammonia inhibition was observed, even with free-ammonia (NH3) concentrations reaching up to 14 mM. This study underscores the potential of high-pH anaerobic digestion as a sustainable method for both waste treatment and energy recovery.

This study investigated a novel thermal-hydrolysis combined with a vacuum fermentation system for high-grade volatile fatty acids (VFA) recovery, and the corresponding changes in the microbial community. Four systems with and without hydrothermal pre-treatment (HTP) and vacuum were mobilized; results revealed that integration of HTP with vacuum has the highest potential in terms of VFA recovery, sludge disintegration, and solid reduction. HTP and vacuum fermentation systems were associated with the highest COD solubilization (45 %), and VFA yield (0.32 g COD/g VSS added). Vacuum fermenters with and without pre-treatment have the highest specific denitrification rates of 7.6 and 7.2 mg NO3-N/g VSS.h, respectively, compared to all other samples and control (acetate). Changes brought about by vacuum fermentation included a shift in the microbial community toward enriching fermenters, mainly Caprothermobacteria and Thermotagea, responsible for VFA production.

Tenebrio molitor is proposed for the valorization of mycotoxins-contaminated substrates no longer usable for other purposes. Larvae were reared on three different wheat matrices (wholegrain flour, shorts and bran) contaminated with different levels of mycotoxins. Nine diets (3 matrices × 3 contamination levels) were assessed. Larval development time, average daily gain (ADG), substrate consumption, survival rate, and the capacity of T. molitor to accumulate and excrete different mycotoxins, through exuviae and frass, were evaluated. Larval development time, ADG, survival rate and substrate consumption were not negatively affected by the mycotoxins, but only by the rearing matrix, depending on the nutritive value. The ability of larvae to excrete DON and its derivatives through exuviae and frass was observed. Within each matrix, DON contamination in larvae increased significantly moving from poorly to highly contaminated ones. Overall, the ratio between the modified form (deoxynivalenol-3-glucoside) and the native one (DON), increased from 7%, in the raw materials, to 101% in the larvae, highlighting their ability to modify this mycotoxin and accumulate it in their body. Larvae accumulated also nivalenol, zearalenone, and enniatins showing a higher concentration in larvae reared on substrates with high level of contamination, while moniliformin was never found in larvae. Overall, the levels of mycotoxins recorded in larvae was always below the current legal limits for livestock feed, thanks to their ability to excrete them through exuviae and frass. These interesting data open new scenarios on the valorization of mycotoxin-contaminated matrices, not suitable for other livestock farming, by means of insects.

Rapid population growth, climate change, and resource depletion pose significant challenges to global food production, demanding sustainable solutions. A Life-Cycle Assessment (LCA) provides a structured framework for evaluating the environmental impact of food systems throughout their entire life cycle. This review examines how an LCA can be integrated with circular economy principles to address sustainability challenges, optimize resource use, and minimize waste in food and alcoholic beverage production. A systematic review of LCA applications in the agri-food sector was conducted, analyzing studies published across different regions. The selection criteria included relevance to circular economy strategies, waste valorization approaches, and assessing environmental impacts using LCA methodologies. The analysis explores explicitly the synergy between food and wine production within the broader agri-food system, considering shared sustainability challenges and opportunities for resource optimization. Key methodologies include cradle-to-grave assessments and the evaluation of waste-to-resource technologies. The findings demonstrate that LCA effectively identifies critical environmental hotspots, enabling the implementation of eco-design and resource recovery practices. Circular strategies, such as the use of renewable energy, precision agriculture, and nutrient recovery, significantly enhance sustainability. However, gaps remain in accounting for social and regional variability, as well as in integrating advanced technologies. When combined with circular economy principles, LCA provides actionable insights for policy development and sustainable practices. Advancing LCA methodologies and fostering multi-stakeholder collaboration are essential for creating resilient and environmentally responsible agri-food systems.

The poultry slaughter industry's substantial water usage and wastewater generation necessitate effective wastewater management strategies. This study explores the optimization of autoclave pretreatment and inoculum to substrate ratio (ISR) for improving the anaerobic digestion (AD) of poultry slaughterhouse wastewater (PSWW). Using response surface methodology (RSM), optimal conditions were determined to be a pH of 11, a pretreatment time of 60 min, and an ISR of 2. Under these conditions, the methane yield achieved was 385.872 mL CH4/g VSadded, representing a 3.17% increase compared to control 2 (374 mL CH4/g VSadded). The biochemical methane potential (BMP) test confirmed this result, showing a methane yield of 394 mL CH4/g VSadded, which was 5.34% higher than the control 2. Furthermore, under optimal conditions, autoclave pretreatment effectively increased the soluble chemical oxygen demand (sCOD) from 60.03% to 82.55%, demonstrating enhanced solubilization of particulate matter. Ammonia levels were also reduced by 24.5%. This study suggests that autoclave treatment is unsuitable under pH 5 and pH 8 conditions due to protein aggregation. Although autoclave pretreatment has a minimal effect on methane production at pH 11, this approach remains cost-inefficient.

Biogas, consisting mainly of CO2 and CH4, offers a sustainable source of energy. However, this gaseous stream has been undervalued in wastewater treatment plants owing to its high CO2 content. Biogas upgrading by capturing CO2 broadens its utilisation as a substitute for natural gas. Although biogas upgrading is a widely studied topic, only up to 35% of produced raw biogas is upgraded in the world. To open avenues for development research on biogas upgrading, this paper reviews biogas as a component in global renewable energy production and upgrading technologies focusing on electrochemically driven CO2 capture systems. Recent progress in electrochemical CO2 separation including its energy requirement, CO2 recovery rate, and challenges for upscaling are critically explored. Electrochemical CO2 separation systems stand out for achieving the most affordable technology among the upgrading systems with a low net energy requirement of 0.25 kWh/kg CO2. However, its lower CO2 recovery rate compared to conventional technologies, which leads to high capital expenditure limits the commercialisation of this technology. In the last part of this review, the future perspectives to overcome the challenges associated with electrochemical CO2 capture are discussed.

Energy is a crucial part of a comprehensive desire to reach any country's long-term economic and social development. Fossil fuels have for a long time been used as the major global cause of energy. However, dependence on fossil fuels contributes to environmental damage. Biogas generation from biodegradable organic materials is a potential and sustainable substitute for addressing global energy supply inadequacy and curbing the environmental challenges associated with fossil fuels. Biotechnologies particularly anaerobic digestion technology are important process for the recovery of energy from organic materials. Biogas comes from bio-decomposition of various organic substrates and trash. Human excreta, agricultural wastes, industrial food residues, municipal wastes, food wastes and residues, fishery wastes, aquatic plants and forest residues are among the common organic wastes from which biogas is produced today. Properly designed biogas systems play a crucial role in renewable energy production, providing electricity, heating, and lighting from organic waste materials that would otherwise go to landfill. These systems convert agricultural residues, food waste, livestock manure, and even energy crops into biogas, which can be used to power generators, provide heat for cooking, or supply light in homes. In urban and remote areas, biogas digesters offer clean, alternative energy solutions that not only meet local energy demands but also enhance living conditions by reducing the reliance on expensive or polluting energy sources. For instance, households can save on energy costs and improve air quality by using biogas for cooking instead of traditional fuels. Besides, the implementation of biogas technology can significantly mitigate environmental impact by lowering greenhouse gas emissions, reducing waste, and promoting sustainable agricultural practices and supporting circular economy. This review explores a diverse range of potential substrates for biogas production, highlighting their viability as alternatives to fossil fuel-based energy sources and emphasizing the multifaceted benefits they provide to communities.

Energy produced from renewable sources such as sun or wind are intermittent, depending on circumstantial factors. This fact explains why energy supply and demand do not match. In this context, the interest in biomethanation has increased as an interesting contribution to the Power-to-gas concept (P2G), transforming the extra amount of produced electricity into methane (CH4). The reaction between green hydrogen (H2) (produced by electrolysis) and CO2 (pollutant present in biogas) can be catalysed by different microorganisms to produce biomethane, that can be injected into existing natural gas grid if reaching the standards. Thus, energy storage for both hydrogen and electricity, as well as transportation problems would be solved. However, H2 diffusion to the liquid phase for its further biological conversion is the main bottleneck due to the low solubility of H2. This review includes the state-of-the-art in biological hydrogenotrophic methanation (BHM) and membrane-based technologies. Specifically, the use of hollow-fiber membrane bioreactors as a technology to overcome H2 diffusion limitations is reviewed. Furthermore, the influence of operating conditions, microbiology, H2 diffusion and H2 injection methods are critically discussed before setting the main recommendations about BHM.

Aquaculture is a climate-relevant source of greenhouse gases like methane. Methane emissions depend on various parameters, with organic matter playing a crucial role. Nevertheless, little is known about the composition of organic matter in aquaculture. We investigated the effects of excessive loading of high-protein fish feed on the quality of sediment organic matter in a fishpond to explain extremely high methane ebullition rates (bubble flux). Analysing the molecular composition of water-extractable organic matter using liquid chromatography Fourier-transform ion cyclotron resonance mass spectroscopy, we found strong differences between the feeding area and open water area: low-molecular weight nitrogen and sulphur-rich organic compounds were highly enriched at the feeding area. In addition, methane ebullition correlated well with sediment protein content and total bound nitrogen in pore water. Our results indicate that feed proteins in the sediments are hydrolysed into oligopeptides (CHNO) and subsequently converted to CHOS and CHNOS components during anaerobic deamination of protein and peptide fragments in the presence of inorganic sulphides. These metabolites accumulate at the feeding area due to continuous feed supply. Our findings illustrate the adverse effects of excessive feeding leading to bioreactor-like methane emissions at the feeding area. Improving feed management has the potential to make aquaculture more climate-friendly.

A high rate upflow anaerobic polyfoam-based bioreactor (UAPB) was developed for lab-scale in-situ biogas upgrading by H2 injection. The reactor, with a volume of 440 mL, was fed with synthetic wastewater at an organic loading rate (OLR) of 3.5 g COD/L·day and a hydraulic retention time (HRT) of 7.33 h. The use of a porous diffuser, alongside high gas recirculation, led to a higher H2 liquid mass transfer, and subsequently to a better uptake for high CH4 content of 56% (starting from 26%). Our attempts to optimize both operational parameters (H2 flow rate and gas recirculation ratio, which is the total flow rate of recirculated gas over the total outlet of gas flow rate) were not initially successful, however, at a very high recirculation ratio (32) and flow rate (54 mL/h), a significant improvement of the hydrogen consumption was achieved. These operational conditions have in turn driven the methanogenic community toward the dominance of Methanosaetaceae, which out-competed Methanosarcinaceae. Nevertheless, highly stable methane production rates of 1.4-1.9 L CH4/Lreactor.day were observed despite the methanogenic turnover. During the different applied operational conditions, the bacterial community was especially impacted, resulting in substantial shifts of taxonomic groups. Notably, Aeromonadaceae was the only bacterial group positively correlated with increasing hydrogen consumption rates. The capacity of Aeromonadaceae to extracellularly donate electrons suggests that direct interspecies electron transfer (DIET) enhanced biogas upgrading. Overall, the proposed innovative biological in-situ biogas upgrading technology using the UAPB configuration shows promising results for stable, simple, and effective biological biogas upgrading.

Lantana camara, one of the world's top ten most invasive species, was initially cultivated for ornamental use. However, it spread uncontrollably across the fallow areas and agricultural lands, threatening approximately 44% of Indian forests. Its invasion disrupts ecosystems by suppressing nearby plant growth through allelopathy and poses toxicity risks to grazing ruminants. It significantly increases forest fire risk by adding large amounts of combustible biomass, particularly dried L. camara. Despite efforts to control it using mechanical, chemical, and biocontrol methods, the results have been largely unsatisfactory, with associated costs estimated at $18,000 per square kilometre. Considering these challenges, recent research explored the potential of L. camara as a bioenergy resource. The L. camara briquettes exhibit a heating value of approximately 20 MJ/kg with a low sulphur (0.5%), nitrogen (1%), and ash content (2%), making them suitable for decentralised energy production. Furthermore, bioethanol production from L. camara hydrolysate has shown promising results, yielding 0.33 g/g with Pichia stipitis and 0.47 g/g with Saccharomyces cerevisiae, which is comparable to other lignocellulosic feedstocks. Additionally, the gasification of L. camara using a downdraft gasifier produced syngas with a lower heating value (LHV) of 6.4 MJ/Nm3. These findings demonstrate that using L. camara for bioenergy production presents a dual solution, addressing the growing demand for renewable energy and managing invasive species. This review aims to critically evaluate the potential and challenges associated with the different energy production pathways for L. camara, highlighting its role in sustainable energy generation.

Efficient utilization of agricultural wastes and reduction of chemical fertilizer inputs are crucial for sustainable development of agriculture. Plant growth promoting rhizobacteria (PGPR) are widely used as biofertilizers to partially replace chemical fertilizers in agricultural production. The functional performance of PGPR strains is closely related to their root colonization capacity. Some organic acids from root exudates can recruit PGPR to colonize the root. In this study, agricultural organic wastes such as mushroom bran and tobacco waste materials were used to produce organic acids through the hypoxic hydrolysis process. The hydrolysis conditions were optimized to maximize the production of a mixture of complex organic acids from the hypoxic hydrolysis of these materials, employing both single-factor and orthogonal experimental methods. The diluted hydrolysates were tested for their effects on the rhizosphere colonization of the PGPR strain Bacillus amyloliquefaciens SQR9 using fluorogenic quantitative PCR in greenhouse pot experiments. The results demonstrated that hypoxic hydrolysates from tobacco waste and mushroom bran significantly enhanced the colonization of SQR9 in the maize rhizosphere. Specifically, a 2000-fold dilution of tobacco waste hydrolysate yielded the most effective result, while a 5000-fold dilution of mushroom bran hydrolysate provided the best outcome. All treatments combining these hydrolysates with SQR9 significantly increased maize stem dry weight, indicating that with appropriate treatment, such as anaerobic fermentation, these agricultural organic wastes can serve as synergistic agents of microbial fertilizers, contributing to agricultural sustainability.

Energy self-circulation systems, defined as energy systems incorporating the recycling utilization of waste biomass, have been proposed to reduce greenhouse gases emissions from livestock sector. In this study, a comprehensive review of the situation and challenges of biogas utilization in the livestock industry was provided. Moreover, two technological routes were proposed for a circular livestock system combined with Powerfuels production (CP-CLS), starting from biogas combustion for power generation and steam reforming to the sustainable development path of synthesizing, storing, and utilizing Powerfuels. The self-circulation capability and comprehensive benefits of the CP-CLS life cycle was discussed, along with future application scenarios and proposed standards for Powerfuels. To realize this potential, continuous research, development, and policy support are crucial. This study envisions the next generation of energy self-circulation systems, which expects to reduce the negative effect of livestock industry on climate change and promote sustainable development.

The holistic characterization of different microbiomes in anaerobic digestion (AD) systems can contribute to a better understanding of these systems and provide starting points for bioengineering. The present study investigates the microbiome of 80 European full-scale AD systems. Operational, chemical and taxonomic data were thoroughly collected, analysed and correlated to identify the main drivers of AD processes.

The present study describes chemical and operational parameters for a broad spectrum of different AD systems. With this data, Spearman correlation and differential abundance analyses were applied to narrow down the role of the individual microorganisms detected. The authors succeeded in further limiting the number of microorganisms in the core microbiome for a broad range of AD systems. Based on 16S rRNA gene amplicon sequencing, MBA03, Proteiniphilum, a member of the family Dethiobacteraceae, the genus Caldicoprobacter and the methanogen Methanosarcina were the most prevalent and abundant organisms identified in all digesters analysed. High ratios for Methanoculleus are often described for agricultural co-digesters. Therefore, it is remarkable that Methanosarcina was surprisingly high in several digesters reaching ratios up to 47.2%. The various statistical analyses revealed that the microorganisms grouped according to different patterns. A purely taxonomic correlation enabled a distinction between an acetoclastic cluster and a hydrogenotrophic one. However, in the multivariate analysis with chemical parameters, the main clusters corresponded to hydrolytic and acidogenic microorganisms, with SAOB bacteria being particularly important in the second group. Including operational parameters resulted in digester-type specific grouping of microbes. Those with separate acidification stood out among the many reactor types due to their unexpected behaviour. Despite maximizing the organic loading rate in the hydrolytic pretreatments, these stages turned into extremely robust methane production units.

From 80 different AD systems, one of the most holistic data sets is provided. A very distinct formation of microbial clusters was discovered, depending on whether taxonomic, chemical or operational parameters were combined. The microorganisms in the individual clusters were strongly dependent on the respective reference parameters.

Roadside grass clippings hold potential as a sustainable source of bioenergy as they do not compete with crops for land use, and are only partially utilized for low-value applications. In this study, we proposed using roadside grass as a sole feedstock for anaerobic digestion (AD) in three different settings, and assessed the potential of producing biomaterials and fertilizers from grass-based digestate. Wet continuous digestion at pilot scale and dry batch digestion at pilot and large scales resulted in biogas yields up to 700 Nm3.t-1 DOM with a methane content of 49-55 %. Despite promising results, wet AD had operational problems such as clogging and poor mixing; once upscaled, the dry digestion initially also presented an operational problem with acidification, which was overcome by the second trial. Digested grass fibers from the pilot dry AD were processed into biomaterials and performed similarly or better than the undigested fibers, while around 20 % performance reduction was observed when compared to reference wood fibers. A mass balance indicated reduced fiber recovery when higher biogas production was obtained. The liquid fraction from the pilot dry AD was characterized for its nutrient content and used as a biofertilizer in another study. In contrast, the leachate collected from the large-scale dry AD had a low nitrogen content and high chloride content that could hinder its further use. Finally, a regional market analysis was conducted showing that the biocomposites produced with the available grass fibers could substitute at least half of the current European market based on our results.

The organic wastes and residues generated from agricultural, industrial, and domestic activities have the potential to be converted to bioenergy. One such energy is biogas, which has already been included in rural areas as an alternative cooking energy source and agricultural activities. It is produced via anaerobic digestion of a wide range of organic nutrient sources and is an essential renewable energy source. The factors influencing biogas yield, i.e., the various substrate, their characteristics, pretreatment methods involved, different microbial types, sources, and inoculum properties, are analyzed. Furthermore, the optimization of these parameters, along with fermentation media optimization, such as optimum pH, temperature, and anaerobic digestion strategies, is discussed. Novel approaches of bioaugmentation, co-digestion, phase separation, co-supplementation, nanotechnology, and biorefinery approach have also been explored for biogas production. Finally, the current challenges and prospects of the process are discussed in the review.

Leach bed reactors (LBRs) are dry anaerobic systems that can handle feedstocks with high solid content, like chicken manure, with minimal water addition. In this study, the chicken manure was mixed with zeolite, a novel addition, and packed in the LBR to improve biogas production. The resulting leachate was then processed in a continuous stirred tank reactor (CSTR), where most of the methane was produced. The supernatant of the CSTR was returned to the LBR. The batch mode operation of the LBR led to a varying methane production rate (MPR) with a peak in the beginning of each batch cycle when the leachate was rich in organic matter. Comparing the MPR in both systems, the peaks in the zeolite system were higher and more acute than in the control system, which was under stress, as indicated by the acetate accumulation at 2328 mg L-1. Moreover, the presence of zeolite in the LBR played a crucial role, increasing the overall methane yield from 0.142 (control experiment) to 0.171 NL CH4 per g of volatile solids of chicken manure entering the system at a solid retention time of 14 d. Zeolite also improved the stability of the system. The ammonia concentration increased gradually due to the little water entering the system and reached 3220 mg L-1 (control system) and 2730 mg L-1 (zeolite system) at the end of the experiment. It seems that zeolite favored the accumulation of the ammonia at a lower rate (14.0 mg L-1 d-1) compared to the control experiment (17.3 mg L-1 d-1). The microbial analysis of the CSTR fed on the leachate from the LBR amended with zeolite showed a higher relative abundance of Methanosaeta (83.6%) compared to the control experiment (69.1%). Both CSTRs established significantly different bacterial profiles from the inoculum after 120 days of operation (p < 0.05). Regarding the archaeal communities, there were no significant statistical differences between the CSTRs and the inoculum (p > 0.05).

This review addresses the critical issue of a rapidly increasing worldwide waste stream and the need for sustainable management. The paper proposes an integrated transformation toward a next-generation methanization process, which leads not only to treating waste but also to converting it into higher value compounds and greener energy. Although the current and commonly used anaerobic digestion process is useful for biogas production, it presents limitations of resource exploitation and some negative environmental impacts. Focusing on the acidogenic stage in waste stream processing, the paper discusses the recent strategies to enhance the recovery of volatile fatty acids (VFAs). These acids serve as precursors for synthesizing a variety of biochemicals and biofuels, offering higher value products than solely energy recovery and soil fertilizers. Additionally, the importance of recycling the fermentation residues back into the biorefinery process is highlighted. This recycling not only generates additional VFAs but also contributes to generating clean energy, thereby enhancing the overall sustainability and efficiency of the waste management system. Moreover, the review discusses the necessity to integrate life cycle assessment (LCA) and techno-economic analysis (TEA) to evaluate the environmental impacts, sustainability, and processing costs of the proposed biorefinery.

The excessive discharge and accumulation of solid organic waste into the environment is of severe concern across the globe. Thus, an efficient waste management system is important to mitigate health risks to humans, minimize harmful impacts on the environment, and ensure a sustainable ecosystem. The organic waste is converted into value-added products either using microorganisms or heat energy; these methods are commonly known as biochemical and thermochemical techniques. The biochemical process has the advantage of higher selectivity of the products and lower processing temperatures. The principal conversion processes of this category are fermentation and anaerobic digestion (AD). This review article focuses on AD, a potential method for treating organic waste and creating a variety of products with added value. Here we present the digestibility of various organic wastes, the role of microorganisms, the decomposition process, co-substrates, digester designs, biogas yields, by-products, environmental impacts, and overall techno-economical effectiveness of the process. Further, this review offers insights into new directions for AD for waste treatment and future research without compromising the overall feasibility and environmental sustainability.

With the increasing use of renewable energy resources for the power grid, the need for long-term storage technologies, such as power-to-gas systems, is growing. Biomethanation provides the opportunity to store energy in the form of the natural gas-equivalent biomethane. This study investigates a novel plug flow reactor that employs a helical static mixer for the biological methanation of hydrogen and carbon dioxide. In tests, the reactor achieved an average methane production rate of 2.5 LCH4LR∗d (methane production [LCH4] per liter of reactor volume [LR] per day [d]) with a maximum methane content of 94%. It demonstrated good flexibilization properties, as repeated 12 h downtimes did not negatively impact the process. The genera Methanothermobacter and Methanobacterium were predominant during the initial phase, along with volatile organic acid-producing, hydrogenotrophic, and proteolytic bacteria. The average ratio of volatile organic acid to total inorganic carbon increased to 0.52 ± 0.04, while the pH remained stable at an average of pH 8.1 ± 0.25 from day 32 to 98, spanning stable and flexible operation modes. This study contributes to the development of efficient flexible biological methanation systems for sustainable energy storage and management.

This study investigated biochemical methane potential (B0) of manure residues and solid-liquid separation fractions from Australian dairies. This is important for country-specific sector emissions and biogas potential estimates. A range of samples were collected from 12 farms across 4 Australian states, and B0 was measured. A first B0 value for grazing dairy effluent is reported, at 161 LCH4·kgVS-1. The B0 of manure residues from intensive dairies with total mixed ration feeding was not significantly different, at 202 LCH4·kgVS-1. Passive solid-liquid separation decreased B0 with potential fugitive methane losses. Mechanical separation preserved B0, allowing organic matter diversion to reduce fugitive methane emissions. Cleaning method at a dairy significantly influenced residue total solids content, important for solid-liquid separation and selection of anaerobic digestion technology. Overall, B0 for Australian dairy residues was estimated at 76.2 million m3N methane per annum, with a total energy content of 2.8 petajoules·annum-1.

Garlic, an important economic crop, provides nutrient-rich straw. When appropriately balanced with silage corn stalks, it is a high-quality forage resource. However, studies on the impact of garlic straw with silage corn stalks on Hu sheep's digestive metabolism and rumen microbiota are scarce. In this study, different addition ratios of garlic straw and silage corn stalks were utilized for in vitro experiments. We designed six experimental groups (CON, G0, G20, G40, G60, G80, and G100) based on varying ratios of garlic straw to silage corn stalks. Rumen microbiota was analyzed through 16S rRNA sequencing. Nutrient composition analysis indicated that garlic straw's relative feeding value (RFV) closely resembled that of silage corn stalks. After 24 h of fermentation, dry matter digestibility and in vitro gas production significantly increased, reaching peak values at a 60% addition ratio. Furthermore, volatile fatty acids (VFAs) such as acetic, propionic, and butyric acid exhibited elevated contents, with the highest yields observed at 60% inclusion. At the genus level, Prevotella, Rikenellaceae RC9 gut group, and Succiniclasticum were identified as the dominant bacterial groups. The gas production test showed a significant decrease in the G80 group compared to others. Microbial analysis revealed a higher abundance of Prevotella in G80 compared to G20, offering valuable insights for reducing greenhouse gas emissions from ruminant animals. Finally, this study predicted the impact of garlic straw with silage corn stalks' addition on Hu sheep's metabolic pathways and biological functions of the rumen microbiota. This research highlights the potential for effectively utilizing garlic straw as a feed resource for Hu sheep and proposes a rational proportion for combining garlic straw with silage corn stalks.

Cadmium (Cd) contamination in the soil potentially hampers microbial biomass and adversely affects their services such as decomposition and mineralization of organic matter. It can reduce nitrogen (N) metabolism and consequently affect plant growth and physiology. Further, Cd accumulation in plants can pose health risks through vegetable consumption. Here, we investigated consequences of Cd contamination on fertilizer value and associated health risks following the application of biogas residues (BGR) to various soil types. Our results indicate that the application of BGR to all soil types significantly increased dry matter (DM) yield and N uptake. However, the Cd contamination negatively affected DM yield and N recovery from BGR in a dose-dependent manner. Organic N mineralization from BGR also decreased in Cd-contaminated soils. The highest DM yield and N recovery were recorded in sandy soil, whereas the lowest values were observed in clay soil. Cadmium was accumulated in spinach, and health risk index (HRI) associated with its dietary intake revealed that consuming spinach grown in Cd-contaminated soil, with or without BGR, is unsafe. Among the soil types, values of daily intake of metals (DIM) and HRI were lowest in clay soil and highest in sandy soil. However, the application of BGR curtailed HRI across all soil types. Notably, the application of BGR alone resulted in HRI values < 1, which are under the safe limit. We conclude that soil contamination with Cd reduces fertilizer value and entails implications for human health. However, the application of BGR to the soil can decrease Cd effects.

Mycotoxins can pose a threat to biogas production as they can contaminate the feedstock used in biogas production, such as agricultural crops and other organic materials. This research study evaluated the contents of deoxynivalenol (DON), zearalenone (ZEA), fumonisin (FUM), and aflatoxin (AFL) mycotoxins in maize silage prior to it being processed in a biogas plant and in digestate produced at the end of the anaerobic digestion (AD) process. In the experiment, three samples of silage were collected from one silage warehouse: Variant 1 = low contamination, Variant 2 = medium contamination, and Variant 3 = heavy contamination, which were subjected to investigation. A significantly reduced biogas production was recorded that was proportional to the increasing contamination with molds, which was primarily due to the AD of silage caused by technologically erroneous silage treatment. The AD was connected with changes in silage composition expressed by the values of VS content, sugar content, lactic acid content, acetic acid content, and the ratio of lactic acid content to acetic acid content. The production of biogas and methane decreased with the increasing contents of NDF, ADF, CF, and lignin. The only exception was Variant 2, in which the content of ADF, CF, and lignin was lower (by 8-11%) than that in Variant 1, and only the content of NDF was higher (by 9%) than that in Variant 1. A secondary factor that also correlated with changes in the composition of the substrate was the development of undesirable organisms, which further contributed to its degradation and to the production of mycotoxins. It was also demonstrated in this study that during the AD process, the tested mycotoxins were degraded, and their content was reduced by 27-100%. Only the variant with low mold contamination showed a DON concentration increase of 27.8%.

The biogas produced through anaerobic digestion (AD) of renewable feedstocks is one of the promising alternatives to replace fossil-derived energy. Even though lignocellulosic biomass is the most abundant biomass on earth, only a small fraction is being used towards resources recovery, leaving a great potential unexploited. In this study, the combination of state-of-art genomic techniques and engineered systems were used to further advance the knowledge on biogas production from lignocellulosic-rich residues and the microbiome involved in the anaerobic digestion hereof. A long-term adapted anaerobic microbiome capable of degrading wheat straw as the sole substrate was investigated using protein stable isotope probing (protein-SIP). The results indicated that a diverse microbial community, primarily composed of Firmicutes and Methanogens, played crucial roles in cellulose degradation and methane production. Notably, Defluviitoga tunisiensis, Syntrophothermus lipocalidus, and Pelobacter carbinolicus were identified as direct metabolizers of cellulose, while Dehalobacterium assimilated labelled carbon through cross-feeding. This study provides direct evidence of primary cellulose degraders and sheds light on their genomic composition. By harnessing the potential of lignocellulosic biomass and understanding the microbial communities involved, we can promote sustainable biogas production, contributing to energy security and environmental preservation.

Effective substrate utilization with low residual methane yield in the digestate is crucial for the economy and sustainability of biogas plants. The composition and residual methane potential of 29 digestate samples from plants operating at hydraulic retention times of 13-130 days were determined to evaluate the economic viability of extended digestion. Considerable contents of fermentable fractions, such as cellulose (8-23%), hemicellulose (1-18%), and protein (13-22%), were present in the digestate dry matter. The ultimate residual methane yields varied between 55 and 236 ml/g of volatile solids and correlated negatively with the logarithm of the hydraulic retention time (r = -0.64, p < 0.05). Economic analysis showed that extending the retention time in 20 days would be viable for 18 systems if methane were sold for 1.00 €/m3, with gains up to 40 €/year/m3 of newly installed reactor capacity. The results show the importance of operating at sufficient hydraulic retention time.

The climate impacts of biowaste collection and utilisation were assessed based on data from two regional pilots. The EU's waste legislation will require biowaste source separation and collection from detached houses in communities with over 10,000 inhabitants starting from 2024 onwards. Two novel biowaste collection approaches were piloted in two Finnish case regions. One with biowaste collection to larger biolinks with a van and another with composting biowaste bins. The biolink approach reduces the need for waste truck driving, while composting biowaste bins enable an extended collection period. A life cycle assessment method was applied to assess the climate impacts of biowaste collection options and utilisation compared with current practices. The results show that source separation of biowaste and direction to biogas production leads to lower overall greenhouse gas (GHG) emissions at the system level compared with the current waste incineration option. Waste logistics has only a minor role in total GHG emissions, but a system based on biolinks and biowaste collection using a van led to the lowest GHG emission levels. Therefore, from a GHG emissions perspective, encouraging people to source separate their biowaste should be made as easy and encouraging as possible, no matter how the actual logistics is provided. However, novel and improved approaches for source-separated biowaste collection provide the potential for additional GHG emissions reductions.

This paper explores the mechanisms of biochar that facilitate direct interspecies electron transfer (DIET) among syntrophic microorganisms leading to improved anaerobic digestion. Properties such as specific surface area (SSA), cation exchange capacity (CEC), presence of functional groups (FG), and electrical conductivity (EC) were found favorable for increased methane production, reduction of lag phase, and adsorption of inhibitors. It is revealed that these properties can be modified and are greatly affected by the synthesizing temperature, biomass types, and residence time. Additionally, suitable biochar concentration has to be observed since dosage beyond the optimal range can create inhibitions. High organic loading rate (OLR), pH shocks, quick accumulation and relatively low degradation of VFAs, and the presence of heavy metals and toxins are the major inhibitors identified. Summaries of microbial community analysis show fermentative bacteria and methanogens that are known to participate in DIET. These are Methanosaeta, Methanobacterium, Methanospirillum, and Methanosarcina for the archaeal community; whereas, Firmicutes, Proteobacteria, Synergistetes, Spirochetes, and Bacteroidetes are relatively for bacterial analyses. However, the number of defined cocultures promoting DIET is very limited, and there is still a large percentage of unknown bacteria that are believed to support DIET. Moreover, the instantaneous growth of participating microorganisms has to be validated throughout the process.

Animal slurry storage is a significant source of greenhouse gas (GHG) and ammonia (NH3) emissions. pH is a basic but key factor that could pose great influence on gas emissions, but the simultaneous evaluation of its influence on GHG and NH3 emissions and the understanding of its underlying mechanism are not enough. In this work, pH was adjusted between 5.5 and 10.0 by a step of 0.5 unit by adding lactic acid and sodium hydroxide (NaOH) properly and frequently to the stored slurry during a 43-day storage period. The cumulative NH3 emissions were linearly correlated with the slurry pH, with R2 being 0.982. Maintaining the slurry pH at 5.5-6.0 could reduce NH3 emissions by 69.4%-85.1% compared with the non-treated group (CK). The pH ranges for maximum methane (CH4) and nitrous oxide (N2O) emissions were 7.5-8.5 and 6.5-8.5, respectively, and the slurry under pH 7.5-8.5 showed the highest GHG emissions. Acidification to pH 5.5 helped reduce the CH4, N2O, and total GHG emissions by 98.0%, 29.3%, and 81.7%, respectively; while alkalinization to pH 10.0 helped achieve the mitigation effects of 74.1%, 24.9%, and 30.6%, respectively. The Pearson's correlation factor between CH4 and the gene copy of mcrA under different pH values was 0.744 (p < 0.05). Meanwhile, the correlation factors between N2O and the gene copies of amoA, narG, and nirS were 0.644 (p < 0.05), 0.719 (p < 0.05), and 0.576 (p = 0.081), respectively. The gene copies of mcrA, amoA, narG, and nirS were maintained at the lowest level under pH 5.5. These results recommended keeping slurry pH lower than 5.5 with lactic acid can help control GHG and NH3 emissions simultaneously and effectively.

The development of renewable and low-carbon gases for injection into the gas grid obtained by different processes such as anaerobic digestion, pyrogasification, hydrothermal gasification, and methanation, followed by upgrading steps, increases the demand for analysis and characterization in order to fully manage their integration into the gas value chain. If the analysis of the main compounds (methane, carbon dioxide, hydrogen, and carbon monoxide) is well described, the analysis of impurities in renewable gases remains more challenging due to their various natures and quantities. After a brief description of renewable and low-carbon methane production processes, the review focuses on the methods used for the analysis of the different compounds in renewable gases, from the main ones to impurities at ppbv levels. Gas chromatography (GC), coupled with different detectors, is the preferred technique, enabling the analysis and quantification of siloxanes, terpenes, oxygenates, and sulfur compounds. Recently, comprehensive two-dimensional GC has been applied to renewable gases, increasing the number of compounds detected. Non-chromatographic techniques are also reviewed. As sampling is of major importance in the search for reliable analyses, a whole section is devoted to this aspect. Among the available methods, pre-concentration on adsorbent tubes emerges as the most relevant solution.

Management of plant-parasitic nematodes uses host plant resistance, crop rotation, cultural methods, and nematicide applications. Host plant resistance is tedious to develop, and crop rotation and cultural methods are challenging to use. Environmental and human health concerns render sole reliance on chemical nematode suppression nonsustainable. Previously, digestate from anaerobically fermented maize silage suppressed Heterodera schachtii in Beta vulgaris crops. Here, seven digestates were investigated for nematode suppressive potential: liquid dairy manure digestate (LDMD), liquid dairy manure digestate with ammonia removed (LDMDA-), food waste digestate (FWD), liquid food waste digestate with ammonia removed (LFWDA-), liquid food waste digestate (LFWD), food waste hydrolysate from the Renewable Energy Anaerobic Digester (HREAD), and food waste hydrolysate from the South Area Transfer Station in Sacramento (HSATS). In a red radish (Raphanus sativus) bioassay with H. schachtii, digestates were amended at rates of 0.02, 0.11, 0.57, and 2.86 ml per 100 cm3 of soil. At a rate of 2.86 ml, all amendments except LDMDA- and LFWDA- significantly reduced juvenile root penetration compared with the infested control. In a greenhouse watermelon (Citrullus lanatus) bioassay with Meloidogyne incognita, amendments FWD, LFWD, HREAD, and HSATS as well as LDMD (less effectively) at 2.86 and 5.76 ml per 100 cm3 of soil significantly reduced egg masses per root system compared with the nontreated, nematode-infested control. In a microplot experiment with M. incognita and red radish, in the treatment amended with LFWD at 2.37 ml per 100 cm3 of soil, marketable yields were improved by approximately 50% over the nontreated control and were comparable with those in the treatment with the nematicide Reklemel. In a second microplot experiment with M. incognita and watermelon, treatments that contained LFWD at rates of 3.55 ml per 100 cm3 of soil had transient numerical effects of initial nematode suppression that were not maintained throughout the 3-month growth period. The results of these studies demonstrated that digestates FWD and LFWD consistently expressed some nematode-suppressive capacity.

Biological methanation of H₂ and CO₂ in trickle bed reactors is a promising energy conversion and storage approach that can support the energy transition towards a renewable-based system. Research in trickle bed reactor design and operation has significantly increased in recent years, but most studies were performed at laboratory scale and conditions. This review provides a comprehensive overview of the trickle bed reactor concept and current developments to support the decision-making process for future projects. In particular, the key design and operational parameters, such as trickling or nutrient provision, are presented, introducing the most recent advances. Furthermore, reactor operation, including the inoculation, long-term and dynamic operation, is described. To better assess the reactor upscaling, several parameters that enable reactor comparison are discussed. On the basis of this review, suitable operational strategies and further research needs were identified that will improve the overall trickle bed reactor performance.

Hybrid polyvinylidene fluoride-silica-hexadecyltrimethoxysilane (PVDF-SiO₂-HDTMS) membranes were fabricated via a non-solvent-induced phase-inversion method to create stable hollow-fiber membranes for use in the membrane contact absorption of carbon dioxide (CO₂). The surface properties, performance characteristics, and long-term performance stability of the prepared membranes were compared and analyzed. The outer surfaces of the prepared membranes were superhydrophobic because of the formation of rough nanoscale microstructures on the surfaces and their low surface free energy. The addition of inorganic nanoparticles improved the mechanical strength of the PVDF-SiO₂-HDTMS. Long-term stable operation experiments were carried out with a mixed inlet gas (CO₂/N₂ = 19/81, v/v) at a flow rate of 20 mL/min. The absorbent liquid in these experiments was 1 mol/L diethanolamine (DEA) at a flow rate of 50 mL/min. The mass transfer flux of CO₂ through the PVDF-SiO₂-HDTMS membrane decreased from an initial value of 2.39 × 10^-3 mol/m²s to 2.31 × 10^-3 mol/m²s, a decrease of 3% after 20 days. The addition of highly stable and hydrophobic inorganic nanoparticles prevented pore wetting and structural damage to the membrane. The PVDF-SiO₂-HDTMS membrane was found to have excellent long-term stable performance in absorbing CO₂.

Anaerobic digestion (AD) of wasted activated sludge from wastewater plants is recognized as an effective method to reclaim energy in the form of methane. AD performance has been enhanced by coupling various pretreatments that impact energy conversion from sludge. This paper mainly reviewed the development of pretreatments based on different technologies reported in recent years and evaluated their energy benefit. Significant increases in methane yield are generally obtained in AD with pretreatments demanding energy input, including thermal- and ultrasound-based methods. However, these energy-intense pretreatments usually gained negative energy benefit that the increase in methane yield consumed extra energy input. The unbalanced relationship counts against the goal of energy reclamation from sludge. Combined pretreatment consisting of multiple technologies normally outcompetes the single pretreatment, and the combination of energy-intense methods and chemicals potentially reduces energy input and simultaneously ensure high methane yield. For determining whether the energy reclamation from sludge via AD contribute to mitigating global warming, integrating greenhouse gas emission into the evaluation system of pretreated AD is further warranted.

The steady increase in human population and a rising standard of living heighten global demand for energy. Fossil fuels account for more than three-quarters of energy production, releasing enormous amounts of carbon dioxide (CO2) that drive climate change effects as well as contributing to severe air pollution in many countries. Hence, drastic reduction of CO2 emissions, especially from fossil fuels, is essential to tackle anthropogenic climate change. To reduce CO2 emissions and to cope with the ever-growing demand for energy, it is essential to develop renewable energy sources, of which biofuels will form an important contribution. In this Essay, liquid biofuels from first to fourth generation are discussed in detail alongside their industrial development and policy implications, with a focus on the transport sector as a complementary solution to other environmentally friendly technologies, such as electric cars.

Large-scale pig farming is associated with the production of large amounts of animal excrement, which, after processing into the form of, e.g., slurry, are managed on agricultural land as natural fertilizers. The utilization of pig manure on agricultural land in an excessive and uncontrolled manner may pose a threat to zoonoses due to the significant amounts of potentially pathogenic microorganisms within its content. This study aims to determine the impact of the methane fermentation process carried out in two agricultural biogas plants on the efficiency of sanitization of pig slurry, input biomass, and digestate. The biogas plants differed in terms of the substrate used; one used pig slurry from a maternal (breeding) farm (BP-M), and the other utilized pig slurry from a fattening farm (BP-F). The physicochemical analyses showed that the slurry, input biomass, and digestate from the BP-F were characterized by a significantly higher contents of organic dry matter, ash, and ammonium nitrogen than the slurry, input biomass, and digestate from the BP-M. The parameters of the methane fermentation process, including temperature and pH, reached higher values in the BP-F compared to the BP-M. The microbiological analyses led to the conclusion that the efficiency of sanitization of input biomass, including pig slurry, was significantly higher in the BP-F compared to the BP-M. Due to the above findings, locating biogas plants near pig fattening farms should be recommended.

Perennial energy grasses (PEGs) are supposed to be a momentous heading to the development of biomass energy on account of their characteristic superiorities of high yield, strong adaptability and no direct competition with food crops. Anaerobic digestion of PEGs with great biogas-producing potential occupies an irreplaceable status despite a variety of pathways for conversion to renewable energy. However, efficient digestion of PEGs suffers from severe challenges in connection with feedstock properties such as recalcitrant structures. This review highlights recent research in anaerobic digestion of PEGs and focuses on essential aspects enhancing anaerobic digestion performance: types and properties of grasses, diverse pretreatments, various co-feedstocks for co-digestion, dosing of different additives, and improvements in reactors. General discussions on the future prospects of anaerobic digestion of PEGs are proposed. Overcoming knowledge gaps and technical limitations will facilitate further application of PEGs on an industrial scale.

Utility of biochar addition in anaerobic processes for promoting direct interspecies electron transfer (DIET) is demonstrated in this research. Biochar produced from pyrolysis of pine needle forest residue was used as conductive material for DIET. Three CSTRs were operated in parallel with and without biochar addition in fed-batch mode. Reactor without biochar which represented indirect interspecies electron transfer (IIET) exhibited wide variation in pH and VFA and took longer period during startup. All the rectors were operated at steady state with an OLR ranging from 0.5 to 1.75 kg-COD/m³.d. As OLR increased, performance of reactor without biochar resulted in rapid pH drop and increase in VFA, leading to its eventual failure at OLR of 1.75 kg-COD/m³.d. As against to this, performance of reactors with biochar remained robust and relatively unaffected at higher OLR values. Daily VFA accumulation from fed-batch mode always remained highest in reactor without biochar.

Rice straw (RS) has been recognized as a sustainable renewable energy resource for converting into sugars and volatile fatty acids (acetate, propionate, and butyrate) and subsequently to produce biogas. Enhanced production of these intermediates from RS by the different combinations of two consortia was investigated. Anaerobic microbial cocktails of fungi, bacteria, and methanogens were evaluated for performance and stability in the anaerobic digestion of untreated RS. The best-defined anaerobic microbial cocktail for high RS degradation and methane production, consisting of anaerobic bacteria (mainly Proteiniphilum acetatigenes, Pyramidobacter piscolens, and Mesotoga prima) and anaerobic lignocellulolytic/fermentative fungi (uncultured Neocallimastigales, Orpinomyces, Anaeromyces, and Feramyces sp.) at a copy number ratio of 10³-10⁵ copies/mL, including hydrogenotrophic and acetoclastic methanogens (Methanosarcina mazei, Methanoculleus marisnigri, Methanofollis liminatans, Methanoculleus bourgensis, and Methanosaeta harundinacea) concentration of 10⁶ copies/mL, was successfully constructed. The system performance was 80% VS (volatile solids) RS degradation, 34 mL/day methane production rate, 318 mL/g VS_added methane yield, and a pH range of 6.90-7.70 within a short time of 14 days. A defined microbial cocktail has been proven as a potential alternative process for lignocellulose hydrolysis and methane production.

To resolve environmental problems associated with rice straw and silage effluent disposal, silage effluent pretreating rice straw for the anaerobic production of volatile fatty acids (VFAs) was investigated. To prevent the lactic acid bacteria in silage effluent from inhibiting anaerobic fermentation, four phenyllactic acid (PLA) levels were set (0, 0.1, 0.3, 0.5 mg/kg). The total VFA yields of treatments pretreated only with silage effluent (CK) were higher than the groups combined with PLA during 15 days fermentation. Compared to PLA treatments, the total VFA of CK increased by 11.4 % ∼ 25.1 % on day 15. The CK showed higher lactic and propionic acid contents and lower pH values (<4.9). The PLA treatments decreased Lactobacillus abundance while increasing bacterial richness and evenness, and acetic and butyric acid contents. These demonstrated silage effluent has the potential to be used as a biological pretreatment for VFA production in anaerobic fermentation.

The presented paper deals with the testing of a possibility to reduce emissions of undesirable greenhouse gases (CH₄, CO_2; NO_x) and their mixture (biogas) during the storage of digestate using applications of secondary plant metabolites (tannins). The experiment was conducted in laboratory conditions in which the digestate was placed in fermentation chambers. Prior to the fermentation process, preparations were applied to the digestate, which contained tannins: Tanenol Antibotrytis (TA), Tanenol Clar (TC) and Tanenol Rouge (TR) in three concentrations (0.5, 1.0 and 2.0% w/w). The application of these preparations demonstrably affected the production of biogas and the contents of CH₄, CO₂ and N therein. The application of TR preparation in the concentration of 1.0% and 2.0% significantly reduced the production of biogas as compared with all variants. The preparation further inhibited the process of CH₄ development. In contrast, the other preparations with the content of different kinds of TA and TC increased the production of biogas (on average by 15%), CH₄ (on average by 7%) and CO₂ (on average by 12%) as compared with the control variant and TR variant. These two variants reduced the concentration of N in biogas on average by 38%. Thus, the tested Tanenol tannin preparations can be used in different concentrations either to control emissions of greenhouse gases during the storage of digestate or, in case of increased production of CO₂ for its reuse in order to increase methane yields in the process of anaerobic fermentation.

Every year, several million tonnes of anaerobic digestate are produced worldwide as a by-product of the biogas industry, most of which is applied as agricultural fertilizer. However, in the context of a circular bioeconomy, more sustainable uses of residual digestate biomass would be desirable. This study investigates the fate of the sterol lipids β-sitosterol and cholesterol from the feedstocks to the final digestates of three agricultural and one biowaste biogas plants to assess if sterols are degraded during anaerobic digestion or if they remain in the digestate, which could provide a novel opportunity for digestate cascade valorization. Gas chromatographic analyses showed that feedstock sterols were not degraded during anaerobic digestion, resulting in their accumulation in the digestates to up to 0.15% of the dry weight. The highest concentrations of around 1440 mg β-sitosterol and 185 mg cholesterol per kg dry weight were found in liquid digestate fractions, suggesting partial sterol solubilization. Methanogenic batch cultures spiked with β-sitosterol, cholesterol, testosterone and β-oestradiol confirmed that steroids persist during anaerobic digestion. Mycobacterium neoaurum was able to transform digestate sterols quantitatively into androstadienedione, a platform chemical for steroid hormones, without prior sterol extraction or purification. These results suggest that digestate from agricultural and municipal biowaste is an untapped resource for natural sterols for biotechnological applications, providing a new strategy for digestate cascade valorization beyond land application.

Globally, we are faced with a climate crisis that requires urgent transition to a low-carbon economy. Simultaneously, the biodiversity crisis demands equally urgent action to prevent further species loss and promote restoration and rehabilitation of ecosystems. Climate action itself must prevent further pressures on biodiversity and options for synergistic gains for both climate and biodiversity change mitigation and adaptation need to be explored and implemented. Here, we review the key potential impacts of climate mitigation measures in energy and land-use on biodiversity, including the development of renewable energy such as offshore and onshore wind, solar, and bioenergy. We also assess the potential impacts of climate action driven afforestation and native habitat rehabilitation and restoration. We apply our findings to Ireland as a unique case-study as the government develops a coordinated response to climate and biodiversity change through declaration of a joint climate and biodiversity emergency and inclusion of biodiversity in key climate change legislation and the national Climate Action Plan. However, acknowledgement of these intertwined crises is only a first step; implementation of synergistic solutions requires careful planning. We demonstrate how synergy between climate and biodiversity action can be gained through explicit consideration of the effects of climate change mitigation strategies, such as energy infrastructure development and land-use change, on biodiversity. We identify several potential "win-win" strategies for both climate mitigation and biodiversity conservation. For Ireland, these include increasing offshore wind capacity, rehabilitating natural areas surrounding onshore wind turbines, and limiting the development of solar photovoltaics to the built environment. Ultimately, climate mitigation should be implemented in a "Right Action, Right Place" framework to maximise positive biodiversity benefits. This review provides one of the first examples of how national climate actions can be implemented in a biodiversity-conscious way to initiate discussion about synergistic solutions for both climate and biodiversity.

This review focuses on the characteristics of the most widely used biopolymers that contain starch, polylactic acid, cellulose and/or polybutylene succinate. Because worldwide production of bio-based materials has grown dynamically, their waste is increasingly found in the existing waste treatment plants. The development of recycling methods for bio-based materials remains a challenge in the implementation of a circular economy. This article summarizes the recycling methods for bio-based materials, which, in the hierarchy of waste management, is much more desirable than landfilling. Several methods of recycling are available for the end-of-life management of bio-based products, which include mechanical (reuse of waste as a valuable raw material for further processing), chemical (feedstock recycling) and organic (anaerobic digestion or composting) ones. The use of chemical or mechanical recycling is less favourable, more costly and requires the improvement of systems for separation of bio-based materials from the rest of the waste stream. Organic recycling can be a sustainable alternative to those two methods. In organic recycling, bio-based materials can be biologically treated under aerobic or anaerobic conditions, depending on the characteristics of the materials. The choice of the recycling method to be implemented depends on the economic situation and on the properties of the bio-based products and their susceptibility to degradation. Thus, it is necessary to label the products to indicate which method of recycling is most appropriate.

Landfill leachate (LFL) treatment is a severe challenge due to its highly viscous nature and various complex pollutants. Leachate comprises various toxic pollutants, including inorganic macro/nano components, xenobiotics, dissolved organic matter, heavy metals, and microorganisms responsible for severe environmental pollution. Various treatment procedures are available to achieve better effluent quality levels; however, most of these treatments are nondestructive, so pollutants are merely transported from one phase to another, resulting in secondary contamination. Anaerobic digestion is a promising bioconversion technology for treating leachate while producing renewable, cleaner energy. Because of its high toxicity and low biodegradability, biological approaches necessitate employing other techniques to complement and support the primary process. In this regard, pretreatment technologies have recently attracted researchers' interest in addressing leachate treatment concerns through anaerobic digestion. This review summarizes various LFL pretreatment methods, such as electrochemical, ultrasonic, alkaline, coagulation, nanofiltration, air stripping, adsorption, and photocatalysis, before the anaerobic digestion of leachate. The pretreatment could assist in converting biogas (carbon dioxide to methane) and residual volatile fatty acids to valuable chemicals and fuels and even straight to power generation. However, the selection of pretreatment is a vital step. The techno-economic analysis also suggested the high economic feasibility of integrated-anaerobic digestion. Therefore, with the incorporation of pretreatment and anaerobic digestion, the process could have high economic viability attributed to bioenergy production and cost savings through sustainable leachate management options.

Digestate prepared from anaerobic digestion can be used as a fertilizer, as it contains ample amounts of plant nutrients, mainly nitrogen, phosphorous, and potassium. In this regard, digestates produced from mixed intercropped cereal and legume biomass have the potential to enrich soil and plants with nutrients more efficiently than monoculture-based digestates. The objective of this study was to determine the impact of different types of digestates applied at a rate of 40 t·ha-1 of fresh matter on soil properties and crop yield in a pot experiment with lettuce (Lactuca sativa) as a test crop. Anaerobic digestion of silages was prepared from the following monocultures and mixed cultures: broad bean, maize, maize and broad bean, maize and white sweet clover, and white sweet clover. Anaerobic digestion was performed in an automatic custom-made system and applied to the soil. Results revealed that fresh and dry aboveground biomass as well as the amount of nitrogen in plants significantly increased in all digestate-amended variants in comparison to control. The highest content of soil total nitrogen (+11% compared to the control) and urease (+3% compared to control) were observed for maize digestate amendment. Broad bean digestate mediated the highest oxidizable carbon (+48%), basal respiration (+46%), and N-acetyl-β-D-glucosamine-, L-alanine-, and L-lysine-induced respiration (+22%, +35%, +22%) compared to control. Moreover, maize and broad bean digestate resulted in the highest values of N-acetyl-β-D-glucosaminidase and β -glucosidase (+35% and +39%), and maize and white sweet clover digestate revealed the highest value of arylsulfatase (+32%). The observed differences in results suggest different effects of applied digestates. We thus concluded that legume-containing digestates possibly stimulate microbial activity (as found in increased respiration rates), and might lead to increased nitrogen losses if the more quickly mineralized nitrogen is not taken up by the plants.