BPG is committed to discovery and dissemination of knowledge
Cited by in F6Publishing
For: Lal H, Patralekh MK. 3D printing and its applications in orthopaedic trauma: A technological marvel. J Clin Orthop Trauma. 2018;9:260-268. [PMID: 30202159 DOI: 10.1016/j.jcot.2018.07.022] [Cited by in Crossref: 93] [Cited by in F6Publishing: 77] [Article Influence: 23.3] [Reference Citation Analysis]
Number Citing Articles
1 Ozturk AM, Suer O, Derin O, Ozer MA, Govsa F, Aktuglu K. Surgical advantages of using 3D patient-specific models in high-energy tibial plateau fractures. Eur J Trauma Emerg Surg 2020;46:1183-94. [DOI: 10.1007/s00068-020-01378-1] [Cited by in Crossref: 4] [Cited by in F6Publishing: 1] [Article Influence: 2.0] [Reference Citation Analysis]
2 Oraa J, Beitia M, Fiz N, González S, Sánchez X, Delgado D, Sánchez M. Custom 3D-Printed Cutting Guides for Femoral Osteotomy in Rotational Malalignment Due to Diaphyseal Fractures: Surgical Technique and Case Series. J Clin Med 2021;10:3366. [PMID: 34362149 DOI: 10.3390/jcm10153366] [Reference Citation Analysis]
3 Bougher H, Buttner P, Smith J, Banks J, Na HS, Forrestal D, Heal C. Interobserver and intraobserver agreement of three-dimensionally printed models for the classification of proximal humeral fractures. JSES Int 2021;5:198-204. [PMID: 33681838 DOI: 10.1016/j.jseint.2020.10.019] [Cited by in Crossref: 2] [Article Influence: 2.0] [Reference Citation Analysis]
4 Kumar L, Haleem A, Javaid M. Impact of three dimensional printing in orthopedics. Global Health Journal 2021;5:178-82. [DOI: 10.1016/j.glohj.2021.11.009] [Reference Citation Analysis]
5 Yam MGJ, Chao JYY, Leong C, Tan CH. 3D printed patient specific customised surgical jig for reverse shoulder arthroplasty, a cost effective and accurate solution. J Clin Orthop Trauma 2021;21:101503. [PMID: 34414069 DOI: 10.1016/j.jcot.2021.101503] [Reference Citation Analysis]
6 Fang C, Cai L, Chu G, Jarayabhand R, Kim JW, O’neill G. 3D-Druck in der Frakturversorgung: Aktuelle Praxis und „Best-practice“-Konsens. Unfallchirurg 2022;125:342-50. [DOI: 10.1007/s00113-022-01158-z] [Cited by in Crossref: 1] [Cited by in F6Publishing: 1] [Article Influence: 1.0] [Reference Citation Analysis]
7 Durán Muñoz-Cruzado V, Calero Castro FJ, Padillo Eguía A, Tallón Aguilar L, Tinoco González J, Puyana JC, Pareja Ciuró F, Padillo-Ruiz J. Using a bio-scanner and 3D printing to create an innovative custom made approach for the management of complex entero-atmospheric fistulas. Sci Rep 2020;10:19862. [PMID: 33199726 DOI: 10.1038/s41598-020-74213-7] [Reference Citation Analysis]
8 Genova T, Roato I, Carossa M, Motta C, Cavagnetto D, Mussano F. Advances on Bone Substitutes through 3D Bioprinting. Int J Mol Sci 2020;21:E7012. [PMID: 32977633 DOI: 10.3390/ijms21197012] [Cited by in Crossref: 19] [Cited by in F6Publishing: 14] [Article Influence: 9.5] [Reference Citation Analysis]
9 Krettek C. [3D printing in trauma surgery : From simple display model to 3D-print-template-assisted navigation]. Unfallchirurg 2019;122:254-5. [PMID: 30944938 DOI: 10.1007/s00113-019-0635-7] [Cited by in Crossref: 1] [Article Influence: 0.3] [Reference Citation Analysis]
10 Lazzeri S, Talanti E, Basciano S, Barbato R, Fontanelli F, Uccheddu F, Servi M, Volpe Y, Vagnoli L, Amore E, Marzola A, McGreevy KS, Carfagni M. 3D-Printed Patient-Specific Casts for the Distal Radius in Children: Outcome and Pre-Market Survey. Materials (Basel) 2022;15:2863. [PMID: 35454555 DOI: 10.3390/ma15082863] [Reference Citation Analysis]
11 Moldovan F, Gligor A, Bataga T. Integration of Three-dimensional Technologies in Orthopedics: A Tool for Preoperative Planning of Tibial Plateau Fractures. Acta Inform Med 2020;28:278-82. [PMID: 33627930 DOI: 10.5455/aim.2020.28.278-282] [Cited by in Crossref: 1] [Article Influence: 0.5] [Reference Citation Analysis]
12 Campana V, Cardona V, Vismara V, Monteleone AS, Piazza P, Messinese P, Mocini F, Sircana G, Maccauro G, Saccomanno MF. 3D printing in shoulder surgery. Orthop Rev (Pavia) 2020;12:8681. [PMID: 32913609 DOI: 10.4081/or.2020.8681] [Cited by in Crossref: 1] [Article Influence: 0.5] [Reference Citation Analysis]
13 Marongiu G, Dolci A, Verona M, Capone A. The biology and treatment of acute long-bones diaphyseal fractures: Overview of the current options for bone healing enhancement. Bone Rep 2020;12:100249. [PMID: 32025538 DOI: 10.1016/j.bonr.2020.100249] [Cited by in Crossref: 11] [Cited by in F6Publishing: 11] [Article Influence: 5.5] [Reference Citation Analysis]
14 Marinescu R, Popescu D, Laptoiu D. A Review on 3D-Printed Templates for Precontouring Fixation Plates in Orthopedic Surgery. J Clin Med 2020;9:E2908. [PMID: 32916844 DOI: 10.3390/jcm9092908] [Cited by in Crossref: 5] [Cited by in F6Publishing: 2] [Article Influence: 2.5] [Reference Citation Analysis]
15 Singh SP, Varghese KJ, Qureshi FM. Commentary: Meta-Analysis of 3D Printing Applications in Traumatic Fractures. Front Surg 2021;8:783743. [PMID: 34859045 DOI: 10.3389/fsurg.2021.783743] [Reference Citation Analysis]
16 Yang S, Lin H, Luo C. Meta-Analysis of 3D Printing Applications in Traumatic Fractures. Front Surg 2021;8:696391. [PMID: 34532337 DOI: 10.3389/fsurg.2021.696391] [Cited by in Crossref: 1] [Article Influence: 1.0] [Reference Citation Analysis]
17 Mullaveettil FN, Dauksevicius R, Wakjira Y. Strength and elastic properties of 3D printed PVDF-based parts for lightweight biomedical applications. J Mech Behav Biomed Mater 2021;120:104603. [PMID: 34051693 DOI: 10.1016/j.jmbbm.2021.104603] [Cited by in Crossref: 1] [Cited by in F6Publishing: 1] [Article Influence: 1.0] [Reference Citation Analysis]
18 Paramasivam V, Sindhu, Singh G, Santhanakrishnan S. 3D Printing of Human Anatomical Models for Preoperative Surgical Planning. Procedia Manufacturing 2020;48:684-90. [DOI: 10.1016/j.promfg.2020.05.100] [Cited by in Crossref: 3] [Cited by in F6Publishing: 3] [Article Influence: 1.5] [Reference Citation Analysis]
19 Rangarajan R, Blout CK, Patel VV, Bastian SA, Lee BK, Itamura JM. Early results of reverse total shoulder arthroplasty using a patient-matched glenoid implant for severe glenoid bone deficiency. J Shoulder Elbow Surg 2020;29:S139-48. [PMID: 32643608 DOI: 10.1016/j.jse.2020.04.024] [Cited by in Crossref: 1] [Article Influence: 0.5] [Reference Citation Analysis]
20 Javaid M, Haleem A. Impact of industry 4.0 to create advancements in orthopaedics. J Clin Orthop Trauma 2020;11:S491-9. [PMID: 32774017 DOI: 10.1016/j.jcot.2020.03.006] [Cited by in Crossref: 9] [Cited by in F6Publishing: 6] [Article Influence: 4.5] [Reference Citation Analysis]
21 Krettek C, Bruns N. [Current concepts and new developments of 3D printing in trauma surgery]. Unfallchirurg 2019;122:256-69. [PMID: 30903248 DOI: 10.1007/s00113-019-0636-6] [Cited by in Crossref: 5] [Cited by in F6Publishing: 3] [Article Influence: 1.7] [Reference Citation Analysis]
22 Schröder E Souza BG, de Souza Bastos F, de Oliveira VM, Chaoubah A. Three-Dimensional Digital Surgical Planning and Rapid Prototyped Surgical Guides in Bernese Periacetabular Osteotomy. Case Rep Orthop 2020;2020:8897066. [PMID: 32607267 DOI: 10.1155/2020/8897066] [Cited by in Crossref: 1] [Article Influence: 0.5] [Reference Citation Analysis]
23 Patera E, Rust PA. Creation of 3D anatomical models illustrating an intact and centrally torn triangular fibrocartilage complex for patient education prior treatment. Ann Anat 2021;240:151854. [PMID: 34774665 DOI: 10.1016/j.aanat.2021.151854] [Cited by in Crossref: 1] [Article Influence: 1.0] [Reference Citation Analysis]
24 Andrés-cano P, Calvo-haro J, Fillat-gomà F, Andrés-cano I, Perez-mañanes R. Role of the orthopaedic surgeon in 3D printing: current applications and legal issues for a personalized medicine. Revista Española de Cirugía Ortopédica y Traumatología (English Edition) 2021;65:138-51. [DOI: 10.1016/j.recote.2021.01.001] [Reference Citation Analysis]
25 Popescu D, Marinescu R, Laptoiu D, Deac GC, Cotet CE. DICOM 3D viewers, virtual reality or 3D printing - a pilot usability study for assessing the preference of orthopedic surgeons. Proc Inst Mech Eng H 2021;:9544119211020148. [PMID: 34176364 DOI: 10.1177/09544119211020148] [Reference Citation Analysis]
26 Robb H, Scrimgeour G, Boshier P, Przedlacka A, Balyasnikova S, Brown G, Bello F, Kontovounisios C. The current and possible future role of 3D modelling within oesophagogastric surgery: a scoping review. Surg Endosc 2022. [PMID: 35277766 DOI: 10.1007/s00464-022-09176-z] [Reference Citation Analysis]
27 Calvo-Haro JA, Pascau J, Mediavilla-Santos L, Sanz-Ruiz P, Sánchez-Pérez C, Vaquero-Martín J, Perez-Mañanes R. Conceptual evolution of 3D printing in orthopedic surgery and traumatology: from "do it yourself" to "point of care manufacturing". BMC Musculoskelet Disord 2021;22:360. [PMID: 33863319 DOI: 10.1186/s12891-021-04224-6] [Cited by in F6Publishing: 1] [Reference Citation Analysis]
28 Gu Y, Lv T, Jiang C, Lv J. Neuromodulation of the Pudendal Nerve Assisted by 3D Printed: A New Method of Neuromodulation for Lower Urinary Tract Dysfunction. Front Neurosci 2021;15:619672. [PMID: 33716649 DOI: 10.3389/fnins.2021.619672] [Reference Citation Analysis]
29 Whitaker J, Neji R, Byrne N, Puyol-Antón E, Mukherjee RK, Williams SE, Chubb H, O'Neill L, Razeghi O, Connolly A, Rhode K, Niederer S, King A, Tschabrunn C, Anter E, Nezafat R, Bishop MJ, O'Neill M, Razavi R, Roujol S. Improved co-registration of ex-vivo and in-vivo cardiovascular magnetic resonance images using heart-specific flexible 3D printed acrylic scaffold combined with non-rigid registration. J Cardiovasc Magn Reson 2019;21:62. [PMID: 31597563 DOI: 10.1186/s12968-019-0574-z] [Cited by in Crossref: 3] [Cited by in F6Publishing: 3] [Article Influence: 1.0] [Reference Citation Analysis]
30 Thomas CN, Mavrommatis S, Schroder LK, Cole PA. An overview of 3D printing and the orthopaedic application of patient-specific models in malunion surgery. Injury 2021:S0020-1383(21)00925-6. [PMID: 34838259 DOI: 10.1016/j.injury.2021.11.019] [Reference Citation Analysis]
31 Pengrung N, Lakdee N, Puncreobutr C, Lohwongwatana B, Sa-Ngasoongsong P. Finite element analysis comparison between superior clavicle locking plate with and without screw holes above fracture zone in midshaft clavicular fracture. BMC Musculoskelet Disord 2019;20:465. [PMID: 31640668 DOI: 10.1186/s12891-019-2847-y] [Cited by in Crossref: 1] [Article Influence: 0.3] [Reference Citation Analysis]
32 Kaschwich M, Horn M, Matthiensen S, Stahlberg E, Behrendt CA, Matysiak F, Bouchagiar J, Dell A, Ellebrecht D, Bayer A, Kleemann M. Accuracy evaluation of patient-specific 3D-printed aortic anatomy. Ann Anat 2021;234:151629. [PMID: 33137459 DOI: 10.1016/j.aanat.2020.151629] [Cited by in Crossref: 3] [Article Influence: 1.5] [Reference Citation Analysis]
33 Majstorović N, Majstorović V, Mitrović R, Mišković Ž. Industry 4.0 and their application in medicine and dentistry, as well as the fight against the COVID-19 pandemic. Tehnika 2021;76:509-20. [DOI: 10.5937/tehnika2104509m] [Reference Citation Analysis]
34 Fu J, Ni M, Zhu F, Li X, Chai W, Hao L, Zhou Y, Zhang G, Chen J. Reconstruction of Paprosky Type III Acetabular Defects by Three‐Dimensional Printed Porous Augment: Techniques and Clinical Outcomes of 18 Consecutive Cases. Orthopaedic Surgery. [DOI: 10.1111/os.13250] [Reference Citation Analysis]
35 Pugliese R, Regondi S. Artificial Intelligence-Empowered 3D and 4D Printing Technologies toward Smarter Biomedical Materials and Approaches. Polymers (Basel) 2022;14:2794. [PMID: 35890571 DOI: 10.3390/polym14142794] [Reference Citation Analysis]
36 Wixted CM, Peterson JR, Kadakia RJ, Adams SB. Three-dimensional Printing in Orthopaedic Surgery: Current Applications and Future Developments. J Am Acad Orthop Surg Glob Res Rev 2021;5:e20.00230-11. [PMID: 33877073 DOI: 10.5435/JAAOSGlobal-D-20-00230] [Cited by in Crossref: 1] [Article Influence: 1.0] [Reference Citation Analysis]
37 Mackey A, Ng JI, Core J, Nguyen L, Cross D, Lim P, Woodfield C, Pugliese R, Ku B. Three-Dimensional-Printed Uterine Model for Surgical Planning of a Cesarean Delivery Complicated by Multiple Myomas. Obstet Gynecol 2019;133:720-4. [PMID: 30870296 DOI: 10.1097/AOG.0000000000003107] [Cited by in Crossref: 2] [Cited by in F6Publishing: 1] [Article Influence: 1.0] [Reference Citation Analysis]
38 Mishra A, Verma T, Vaish A, Vaish R, Vaishya R, Maini L. Virtual preoperative planning and 3D printing are valuable for the management of complex orthopaedic trauma. Chin J Traumatol 2019;22:350-5. [PMID: 31668700 DOI: 10.1016/j.cjtee.2019.07.006] [Cited by in Crossref: 16] [Cited by in F6Publishing: 14] [Article Influence: 5.3] [Reference Citation Analysis]
39 Marongiu G, Leinardi L, Congia S, Frigau L, Mola F, Capone A. Reliability and reproducibility of the new AO/OTA 2018 classification system for proximal humeral fractures: a comparison of three different classification systems. J Orthop Traumatol 2020;21:4. [PMID: 32166457 DOI: 10.1186/s10195-020-0543-1] [Cited by in Crossref: 3] [Cited by in F6Publishing: 1] [Article Influence: 1.5] [Reference Citation Analysis]
40 Chadha U, Abrol A, Vora NP, Tiwari A, Shanker SK, Selvaraj SK. Performance evaluation of 3D printing technologies: a review, recent advances, current challenges, and future directions. Prog Addit Manuf. [DOI: 10.1007/s40964-021-00257-4] [Cited by in Crossref: 9] [Cited by in F6Publishing: 6] [Article Influence: 9.0] [Reference Citation Analysis]
41 Vishwanathan K, Kambhampati SBS, Patralekh MK, Vaish A, Vaishya R. Bibliometric analysis of the top 50 most cited publications of the Journal of Clinical Orthopaedics and Trauma. J Clin Orthop Trauma 2021;22:101590. [PMID: 34567972 DOI: 10.1016/j.jcot.2021.101590] [Cited by in Crossref: 2] [Cited by in F6Publishing: 2] [Article Influence: 2.0] [Reference Citation Analysis]
42 Kim T, See CW, Li X, Zhu D. Orthopedic implants and devices for bone fractures and defects: Past, present and perspective. Engineered Regeneration 2020;1:6-18. [DOI: 10.1016/j.engreg.2020.05.003] [Cited by in Crossref: 6] [Cited by in F6Publishing: 2] [Article Influence: 3.0] [Reference Citation Analysis]
43 Abdollahiyan P, Baradaran B, de la Guardia M, Oroojalian F, Mokhtarzadeh A. Cutting-edge progress and challenges in stimuli responsive hydrogel microenvironment for success in tissue engineering today. J Control Release 2020;328:514-31. [PMID: 32956710 DOI: 10.1016/j.jconrel.2020.09.030] [Cited by in Crossref: 8] [Cited by in F6Publishing: 6] [Article Influence: 4.0] [Reference Citation Analysis]
44 Oliver JD, Jia S, Halpern LR, Graham EM, Turner EC, Colombo JS, Grainger DW, D'Souza RN. Innovative Molecular and Cellular Therapeutics in Cleft Palate Tissue Engineering. Tissue Eng Part B Rev 2021;27:215-37. [PMID: 32873216 DOI: 10.1089/ten.TEB.2020.0181] [Cited by in Crossref: 4] [Cited by in F6Publishing: 2] [Article Influence: 2.0] [Reference Citation Analysis]
45 Abood AA, Hellfritzsch MB, Møller-Madsen B, Brüel A, Westersø TS, Vedel-Smith NK, Rahbek O, Rölfing JD. Controlled rotation of long bones by guided growth: A proof of concept study of a novel plate in cadavers. J Orthop Res 2021. [PMID: 34324215 DOI: 10.1002/jor.25148] [Reference Citation Analysis]
46 Marongiu G, Prost R, Capone A. Use of 3D modelling and 3D printing for the diagnostic process, decision making and preoperative planning of periprosthetic acetabular fractures. BMJ Case Rep 2020;13:e233117. [PMID: 31924710 DOI: 10.1136/bcr-2019-233117] [Cited by in Crossref: 7] [Cited by in F6Publishing: 5] [Article Influence: 3.5] [Reference Citation Analysis]
47 Qin W, Li C, Liu C, Wu S, Liu J, Ma J, Chen W, Zhao H, Zhao X. 3D printed biocompatible graphene oxide, attapulgite, and collagen composite scaffolds for bone regeneration. J Biomater Appl 2022;:8853282211067646. [PMID: 35196910 DOI: 10.1177/08853282211067646] [Reference Citation Analysis]
48 Chuo W, Yan G, Zhang R, Zhou Q, Yang M. Accurate Treatment of Condylar Fracture Assisted by Three-Dimensional Prototype and Bioresorbable Plates. J Oral Maxillofac Surg 2021:S0278-2391(21)00535-8. [PMID: 34214477 DOI: 10.1016/j.joms.2021.05.035] [Reference Citation Analysis]
49 Charbonnier B, Hadida M, Marchat D. Additive manufacturing pertaining to bone: Hopes, reality and future challenges for clinical applications. Acta Biomater 2021;121:1-28. [PMID: 33271354 DOI: 10.1016/j.actbio.2020.11.039] [Cited by in Crossref: 5] [Cited by in F6Publishing: 2] [Article Influence: 5.0] [Reference Citation Analysis]
50 Ejnisman L, Gobbato B, de França Camargo AF, Zancul E. Three-Dimensional Printing in Orthopedics: from the Basics to Surgical Applications. Curr Rev Musculoskelet Med 2021;14:1-8. [PMID: 33409834 DOI: 10.1007/s12178-020-09691-3] [Cited by in Crossref: 2] [Cited by in F6Publishing: 1] [Article Influence: 2.0] [Reference Citation Analysis]
51 Haleem A, Javaid M, Vaishya R. 5D printing and its expected applications in Orthopaedics. J Clin Orthop Trauma 2019;10:809-10. [PMID: 31316262 DOI: 10.1016/j.jcot.2018.11.014] [Cited by in Crossref: 23] [Cited by in F6Publishing: 16] [Article Influence: 5.8] [Reference Citation Analysis]
52 Blake C, Birch S, Brandão J. Medical Three-Dimensional Printing in Zoological Medicine. Vet Clin North Am Exot Anim Pract 2019;22:331-48. [PMID: 31395318 DOI: 10.1016/j.cvex.2019.05.004] [Cited by in Crossref: 1] [Cited by in F6Publishing: 1] [Article Influence: 0.3] [Reference Citation Analysis]
53 Marongiu G, Prost R, Capone A. A New Diagnostic Approach for Periprosthetic Acetabular Fractures Based on 3D Modeling: A Study Protocol. Diagnostics (Basel) 2019;10:E15. [PMID: 31905717 DOI: 10.3390/diagnostics10010015] [Cited by in Crossref: 3] [Cited by in F6Publishing: 3] [Article Influence: 1.0] [Reference Citation Analysis]
54 Shah D, Naik L, Paunipagar B, Rasalkar D, Chaudhary K, Bagaria V. Setting Up 3D Printing Services for Orthopaedic Applications: A Step-by-Step Guide and an Overview of 3DBioSphere. Indian J Orthop 2020;54:217-27. [PMID: 33194095 DOI: 10.1007/s43465-020-00254-9] [Cited by in Crossref: 1] [Cited by in F6Publishing: 1] [Article Influence: 0.5] [Reference Citation Analysis]
55 Zhao Y, Wang Z, Zhao J, Hussain M, Wang M. Additive Manufacturing in Orthopedics: A Review. ACS Biomater Sci Eng 2022;8:1367-80. [PMID: 35266709 DOI: 10.1021/acsbiomaterials.1c01072] [Reference Citation Analysis]
56 Andrés-Cano P, Calvo-Haro JA, Fillat-Gomà F, Andrés-Cano I, Perez-Mañanes R. Role of the orthopaedic surgeon in 3D printing: current applications and legal issues for a personalized medicine. Rev Esp Cir Ortop Traumatol (Engl Ed) 2021;65:138-51. [PMID: 33298378 DOI: 10.1016/j.recot.2020.06.014] [Cited by in Crossref: 1] [Cited by in F6Publishing: 1] [Article Influence: 0.5] [Reference Citation Analysis]
57 Downey C, McCarrick C, Fenelon C, Murphy EP, O'Daly BJ, Leonard M. A novel approach using 3-D printing in the Irish National Centre for pelvic and acetabular surgery. Ir J Med Sci 2020;189:219-28. [PMID: 31280418 DOI: 10.1007/s11845-019-02055-y] [Cited by in Crossref: 2] [Article Influence: 0.7] [Reference Citation Analysis]
58 Fischer B, Mason LW. Reconstruction of Severe Ankle and Pilon Fracture Malunions. Foot Ankle Clin 2020;25:221-37. [PMID: 32381311 DOI: 10.1016/j.fcl.2020.02.007] [Reference Citation Analysis]
59 Braun BJ, Grimm B, Hanflik AM, Marmor MT, Richter PH, Sands AK, Sivananthan S. Finding NEEMO: towards organizing smart digital solutions in orthopaedic trauma surgery. EFORT Open Rev 2020;5:408-20. [PMID: 32818068 DOI: 10.1302/2058-5241.5.200021] [Cited by in Crossref: 2] [Cited by in F6Publishing: 1] [Article Influence: 1.0] [Reference Citation Analysis]
60 Rashidbenam Z, Jasman MH, Hafez P, Tan GH, Goh EH, Fam XI, Ho CCK, Zainuddin ZM, Rajan R, Nor FM, Shuhaili MA, Kosai NR, Imran FH, Ng MH. Overview of Urethral Reconstruction by Tissue Engineering: Current Strategies, Clinical Status and Future Direction. Tissue Eng Regen Med 2019;16:365-84. [PMID: 31413941 DOI: 10.1007/s13770-019-00193-z] [Cited by in Crossref: 10] [Cited by in F6Publishing: 7] [Article Influence: 3.3] [Reference Citation Analysis]
61 Fu J, Xiang Y, Ni M, Qu X, Zhou Y, Hao L, Zhang G, Chen J. In Vivo Reconstruction of the Acetabular Bone Defect by the Individualized Three-Dimensional Printed Porous Augment in a Swine Model. Biomed Res Int 2020;2020:4542302. [PMID: 33335923 DOI: 10.1155/2020/4542302] [Reference Citation Analysis]
62 Yang QD, Mu MD, Tao X, Tang KL. Three-dimensional printed talar prosthesis with biological function for giant cell tumor of the talus: A case report and review of the literature. World J Clin Cases 2021; 9(13): 3147-3156 [PMID: 33969102 DOI: 10.12998/wjcc.v9.i13.3147] [Reference Citation Analysis]
63 Bueno-López C, Tamarit-Martínez C, Alambiaga-Caravaca AM, Balaguer-Fernández C, Merino V, López-Castellano A, Rodilla V. 3D Printing of Temporary Prostheses for Controlled-Release of Drugs: Design, Physical Characterization and Preliminary Studies. Pharmaceuticals (Basel) 2021;14:1240. [PMID: 34959642 DOI: 10.3390/ph14121240] [Reference Citation Analysis]
64 Mitxitorena I, Infante A, Gener B, Rodríguez CI. Suitability and limitations of mesenchymal stem cells to elucidate human bone illness. World J Stem Cells 2019; 11(9): 578-593 [PMID: 31616536 DOI: 10.4252/wjsc.v11.i9.578] [Cited by in Crossref: 6] [Cited by in F6Publishing: 7] [Article Influence: 2.0] [Reference Citation Analysis]
65 Bozo IY, Deev RV, Smirnov IV, Fedotov AY, Popov VK, Mironov AV, Mironova OA, Gerasimenko AY, Komlev VS. 3D Printed Gene-activated Octacalcium Phosphate Implants for Large Bone Defects Engineering. Int J Bioprint 2020;6:275. [PMID: 33088987 DOI: 10.18063/ijb.v6i3.275] [Cited by in Crossref: 3] [Cited by in F6Publishing: 3] [Article Influence: 1.5] [Reference Citation Analysis]
66 Menor Fusaro F, Di Felice Ardente P, Pérez Abad M, Yanguas Muns C. Three-dimensional imaging, modeling, and printing in the correction of a complex clavicle malunion. JSES Int 2021;5:729-33. [PMID: 34223422 DOI: 10.1016/j.jseint.2021.04.008] [Reference Citation Analysis]
67 Horas K, Hoffmann R, Faulenbach M, Heinz SM, Langheinrich A, Schweigkofler U. Advances in the Preoperative Planning of Revision Trauma Surgery Using 3D Printing Technology. Journal of Orthopaedic Trauma 2020;34:e181-6. [DOI: 10.1097/bot.0000000000001708] [Cited by in Crossref: 5] [Article Influence: 2.5] [Reference Citation Analysis]
68 Haleem A, Javaid M. Expected role of four-dimensional (4D) CT and four-dimensional (4D) MRI for the manufacturing of smart orthopaedics implants using 4D printing. J Clin Orthop Trauma 2019;10:S234-5. [PMID: 31700212 DOI: 10.1016/j.jcot.2019.01.020] [Cited by in Crossref: 12] [Cited by in F6Publishing: 9] [Article Influence: 4.0] [Reference Citation Analysis]
69 Oki S, Inaba N, Nagura T, Yoshida H. Three-dimensional preoperative planning for adult acute plastic bowing of the ulna. Trauma Case Rep 2020;28:100325. [PMID: 32642535 DOI: 10.1016/j.tcr.2020.100325] [Reference Citation Analysis]
70 Vaish A, Rabari Y, Vaish R, Vaishya R. Correction of a Severe Flexion Knee Deformity Using 3D Printing. Indian J Orthop 2020;54:228-9. [PMID: 32257042 DOI: 10.1007/s43465-019-00035-z] [Cited by in Crossref: 1] [Article Influence: 0.5] [Reference Citation Analysis]
71 Zhang RY, Zhao YP, Su XY, Li JT, Zhao JX, Zhang LC, Tang PF. The Oval-like Cross-section of Femoral Neck Isthmus in Three-dimensional Morphological Analysis. Orthop Surg 2021;13:321-7. [PMID: 33417311 DOI: 10.1111/os.12914] [Reference Citation Analysis]
72 Cristoforetti A, De Stavola L, Fincato A, Masè M, Ravelli F, Nollo G, Tessarolo F. Assessing the accuracy of computer-planned osteotomy guided by stereolithographic template: A methodological framework applied to the mandibular bone harvesting. Computers in Biology and Medicine 2019;114:103435. [DOI: 10.1016/j.compbiomed.2019.103435] [Cited by in Crossref: 2] [Cited by in F6Publishing: 1] [Article Influence: 0.7] [Reference Citation Analysis]
73 MacLeod A, Patterson M, MacTear K, Gill HS. 3D printed locking osteosynthesis screw threads have comparable strength to machined or hand-tapped screw threads. J Orthop Res 2020;38:1559-65. [PMID: 32383302 DOI: 10.1002/jor.24712] [Cited by in Crossref: 1] [Article Influence: 0.5] [Reference Citation Analysis]
74 Larghi Laureiro Z, Novelli S, Lai Q, Mennini G, D'andrea V, Gaudenzi P, Marinozzi F, Engelmann C, Mookarje R, Raptis D, Rossi M, Jalan R. There Is a Great Future in Plastics: Personalized Approach to the Management of Hilar Cholangiocarcinoma Using a 3-D-Printed Liver Model. Dig Dis Sci 2020;65:2210-5. [PMID: 32440740 DOI: 10.1007/s10620-020-06326-y] [Cited by in Crossref: 2] [Cited by in F6Publishing: 2] [Article Influence: 1.0] [Reference Citation Analysis]
75 Chen X, Lim JA, Zhou A, Thahir A. Currents concepts of the perioperative management of closed ankle fractures. J Perioper Pract 2021;:17504589211006018. [PMID: 34190640 DOI: 10.1177/17504589211006018] [Reference Citation Analysis]
76 Cao J, Zhu H, Gao C. A Systematic Review and Meta-Analysis of 3D Printing Technology for the Treatment of Acetabular Fractures. Biomed Res Int 2021;2021:5018791. [PMID: 34458367 DOI: 10.1155/2021/5018791] [Cited by in Crossref: 1] [Article Influence: 1.0] [Reference Citation Analysis]
77 Cornejo J, Cornejo-aguilar JA, Vargas M, Helguero CG, Milanezi de Andrade R, Torres-montoya S, Asensio-salazar J, Rivero Calle A, Martínez Santos J, Damon A, Quiñones-hinojosa A, Quintero-consuegra MD, Umaña JP, Gallo-bernal S, Briceño M, Tripodi P, Sebastian R, Perales-villarroel P, De la Cruz-ku G, Mckenzie T, Arruarana VS, Ji J, Zuluaga L, Haehn DA, Paoli A, Villa JC, Martinez R, Gonzalez C, Grossmann RJ, Escalona G, Cinelli I, Russomano T, Ye C. Anatomical Engineering and 3D Printing for Surgery and Medical Devices: International Review and Future Exponential Innovations. BioMed Research International 2022;2022:1-28. [DOI: 10.1155/2022/6797745] [Cited by in Crossref: 1] [Article Influence: 1.0] [Reference Citation Analysis]
78 Beredjiklian PK, Wang M, Lutsky K, Vaccaro A, Rivlin M. Three-Dimensional Printing in Orthopaedic Surgery: Technology and Clinical Applications. Journal of Bone and Joint Surgery 2020;102:909-19. [DOI: 10.2106/jbjs.19.00877] [Cited by in Crossref: 5] [Cited by in F6Publishing: 1] [Article Influence: 2.5] [Reference Citation Analysis]