BPG is committed to discovery and dissemination of knowledge
Cited by in F6Publishing
For: Sun L, Zhou S, Wang W, Li X, Wang J, Weng J. Preparation and characterization of porous biodegradable microspheres used for controlled protein delivery. Colloids and Surfaces A: Physicochemical and Engineering Aspects 2009;345:173-81. [DOI: 10.1016/j.colsurfa.2009.04.053] [Cited by in Crossref: 51] [Cited by in F6Publishing: 37] [Article Influence: 3.9] [Reference Citation Analysis]
Number Citing Articles
1 Sivasubramanian M, Kang AR, Han HS, Heo R, Lee J, Kim KJ, Jeon SM, Chae SY, Jo D, Kim J, Park JH. Molecular chaperone-like hyaluronic acid nanoparticles: Implications as the carrier for protein delivery systems. Macromol Res 2012;20:1007-10. [DOI: 10.1007/s13233-012-0158-3] [Cited by in Crossref: 2] [Cited by in F6Publishing: 2] [Article Influence: 0.2] [Reference Citation Analysis]
2 Kim Y, Kim H, Sah H. Methylamine acts as excellent chemical trigger to Harden emulsion droplets into spongy PLGA microspheres. RSC Adv 2016;6:85275-84. [DOI: 10.1039/c6ra17576g] [Cited by in Crossref: 2] [Article Influence: 0.3] [Reference Citation Analysis]
3 Bao T, Hiep N, Kim Y, Yang H, Lee B. Fabrication and characterization of porous poly(lactic-co-glycolic acid) (PLGA) microspheres for use as a drug delivery system. J Mater Sci 2011;46:2510-7. [DOI: 10.1007/s10853-010-5101-4] [Cited by in Crossref: 21] [Cited by in F6Publishing: 15] [Article Influence: 1.8] [Reference Citation Analysis]
4 Zhao F, Wu D, Yao D, Guo R, Wang W, Dong A, Kong D, Zhang J. An injectable particle-hydrogel hybrid system for glucose-regulatory insulin delivery. Acta Biomaterialia 2017;64:334-45. [DOI: 10.1016/j.actbio.2017.09.044] [Cited by in Crossref: 57] [Cited by in F6Publishing: 46] [Article Influence: 11.4] [Reference Citation Analysis]
5 Gaignaux A, Réeff J, Siepmann F, Siepmann J, De Vriese C, Goole J, Amighi K. Development and evaluation of sustained-release clonidine-loaded PLGA microparticles. International Journal of Pharmaceutics 2012;437:20-8. [DOI: 10.1016/j.ijpharm.2012.08.006] [Cited by in Crossref: 43] [Cited by in F6Publishing: 39] [Article Influence: 4.3] [Reference Citation Analysis]
6 Buntum T, Kakumyan P, Surassmo S, Thanomsilp C, Suwantong O. Potential of Longan Seed Extract–Loaded Alginate–Chitosan Beads as Drug Delivery System. Front Mater 2022;9:818595. [DOI: 10.3389/fmats.2022.818595] [Reference Citation Analysis]
7 Wu XL, Chen LL, Xin S, Yin YX, Guo YG, Kong QS, Xia YZ. Preparation and li storage properties of hierarchical porous carbon fibers derived from alginic acid. ChemSusChem 2010;3:703-7. [PMID: 20480495 DOI: 10.1002/cssc.201000035] [Cited by in Crossref: 83] [Cited by in F6Publishing: 64] [Article Influence: 6.9] [Reference Citation Analysis]
8 Wang Y, Li C, Wang Y, Zhang Y, Li X. Compound pesticide controlled release system based on the mixture of poly(butylene succinate) and PLA. J Microencapsul 2018;35:494-503. [PMID: 30395751 DOI: 10.1080/02652048.2018.1538265] [Cited by in Crossref: 9] [Cited by in F6Publishing: 8] [Article Influence: 2.3] [Reference Citation Analysis]
9 Kim K, Kang D, Kim M, Kim K, Park K, Hong S, Chang P, Jung H. Generation of alginate nanoparticles through microfluidics-aided polyelectrolyte complexation. Colloids and Surfaces A: Physicochemical and Engineering Aspects 2015;471:86-92. [DOI: 10.1016/j.colsurfa.2015.02.029] [Cited by in Crossref: 15] [Cited by in F6Publishing: 10] [Article Influence: 2.1] [Reference Citation Analysis]
10 Kajjari PB, Manjeshwar LS, Aminabhavi TM. Semi-Interpenetrating Polymer Network Hydrogel Blend Microspheres of Gelatin and Hydroxyethyl Cellulose for Controlled Release of Theophylline. Ind Eng Chem Res 2011;50:7833-40. [DOI: 10.1021/ie200516k] [Cited by in Crossref: 55] [Cited by in F6Publishing: 43] [Article Influence: 5.0] [Reference Citation Analysis]
11 Sang L, Luo D, Wei Z, Qi M. X-ray visible and doxorubicin-loaded beads based on inherently radiopaque poly(lactic acid)-polyurethane for chemoembolization therapy. Mater Sci Eng C Mater Biol Appl 2017;75:1389-98. [PMID: 28415430 DOI: 10.1016/j.msec.2017.03.069] [Cited by in Crossref: 6] [Cited by in F6Publishing: 3] [Article Influence: 1.2] [Reference Citation Analysis]
12 . Pharmaceutical Potential of Gelatin as a pH-responsive Porogen for Manufacturing Porous Poly(d,l-lactic-co-glycolic acid) Microspheres. Journal of Pharmaceutical Investigation 2010;40:245-50. [DOI: 10.4333/kps.2010.40.4.245] [Cited by in Crossref: 2] [Cited by in F6Publishing: 1] [Article Influence: 0.2] [Reference Citation Analysis]
13 Jaszcz K. Highly porous crosslinked poly(ester-anhydride) microspheres with high loading efficiency. Chin J Polym Sci 2015;33:1271-82. [DOI: 10.1007/s10118-015-1677-0] [Cited by in Crossref: 3] [Cited by in F6Publishing: 2] [Article Influence: 0.4] [Reference Citation Analysis]
14 Li C, Wang W, Wang X, Jiang H, Zhu J, Lin S. Fabrication of porous polymer microspheres by tuning amphiphilicity of the polymer and emulsion–solvent evaporation processing. European Polymer Journal 2015;68:409-18. [DOI: 10.1016/j.eurpolymj.2015.05.011] [Cited by in Crossref: 16] [Cited by in F6Publishing: 8] [Article Influence: 2.3] [Reference Citation Analysis]
15 Wang W, Luo C, Shao S, Zhou S. Chitosan hollow nanospheres fabricated from biodegradable poly-d,l-lactide-poly(ethylene glycol) nanoparticle templates. European Journal of Pharmaceutics and Biopharmaceutics 2010;76:376-83. [DOI: 10.1016/j.ejpb.2010.08.009] [Cited by in Crossref: 14] [Cited by in F6Publishing: 12] [Article Influence: 1.2] [Reference Citation Analysis]
16 Yu H, Zhu Y, Hui A, Wang A. Preparation of porous microspherical adsorbent via pine pollen stabilized O1/W/O2 double emulsion for high-efficient removal of cationic dyes. Colloids and Surfaces A: Physicochemical and Engineering Aspects 2020;601:124997. [DOI: 10.1016/j.colsurfa.2020.124997] [Cited by in Crossref: 2] [Cited by in F6Publishing: 2] [Article Influence: 1.0] [Reference Citation Analysis]
17 Jiang T, Singh B, Li H, Kim Y, Kang S, Nah J, Choi Y, Cho C. Targeted oral delivery of BmpB vaccine using porous PLGA microparticles coated with M cell homing peptide-coupled chitosan. Biomaterials 2014;35:2365-73. [DOI: 10.1016/j.biomaterials.2013.11.073] [Cited by in Crossref: 91] [Cited by in F6Publishing: 81] [Article Influence: 11.4] [Reference Citation Analysis]
18 Tang Q, Yu J, Chen L, Zhu J, Hu Z. Porous silicone hydrogel interpenetrating polymer networks prepared using a template method for biomedical use. Polym Int 2011;60:1136-41. [DOI: 10.1002/pi.3053] [Cited by in Crossref: 5] [Cited by in F6Publishing: 3] [Article Influence: 0.5] [Reference Citation Analysis]
19 Alcalá-alcalá S, Benítez-cardoza CG, Lima-muñoz EJ, Piñón-segundo E, Quintanar-guerrero D. Evaluation of a combined drug-delivery system for proteins assembled with polymeric nanoparticles and porous microspheres; characterization and protein integrity studies. International Journal of Pharmaceutics 2015;489:139-47. [DOI: 10.1016/j.ijpharm.2015.04.074] [Cited by in Crossref: 13] [Cited by in F6Publishing: 10] [Article Influence: 1.9] [Reference Citation Analysis]
20 Tao C, Huang J, Lu Y, Zou H, He X, Chen Y, Zhong Y. Development and characterization of GRGDSPC-modified poly(lactide-co-glycolide acid) porous microspheres incorporated with protein-loaded chitosan microspheres for bone tissue engineering. Colloids and Surfaces B: Biointerfaces 2014;122:439-46. [DOI: 10.1016/j.colsurfb.2014.04.024] [Cited by in Crossref: 22] [Cited by in F6Publishing: 17] [Article Influence: 2.8] [Reference Citation Analysis]
21 D’souza S, Dorati R, Deluca PP. Effect of Hydration on Physicochemical Properties of End-Capped PLGA. Advances in Biomaterials 2014;2014:1-9. [DOI: 10.1155/2014/834942] [Cited by in Crossref: 7] [Cited by in F6Publishing: 5] [Article Influence: 0.9] [Reference Citation Analysis]
22 Liu G, Miao X, Fan W, Crawford R, Xiao Y. Porous PLGA Microspheres Effectively Loaded with BSA Protein by Electrospraying Combined with Phase Separation in Liquid Nitrogen. JBBTE 2010;6:1-18. [DOI: 10.4028/www.scientific.net/jbbte.6.1] [Cited by in Crossref: 11] [Article Influence: 0.9] [Reference Citation Analysis]
23 Srivastava R, Pathak K. Microsponges: a futuristic approach for oral drug delivery. Expert Opin Drug Deliv 2012;9:863-78. [PMID: 22663167 DOI: 10.1517/17425247.2012.693072] [Cited by in Crossref: 20] [Cited by in F6Publishing: 13] [Article Influence: 2.0] [Reference Citation Analysis]
24 Bao T, Franco R, Lee B. Preparation and characterization of novel poly(ε-caprolactone)/biphasic calcium phosphate hybrid composite microspheres. J Biomed Mater Res 2011;98B:272-9. [DOI: 10.1002/jbm.b.31849] [Cited by in Crossref: 13] [Cited by in F6Publishing: 11] [Article Influence: 1.2] [Reference Citation Analysis]
25 Zheng H, Xie H, Wu H, Wang F, Liu X, Yu W, Ma X. Investigation of spherical hydrogel surface with optical interferometer. Colloids and Surfaces A: Physicochemical and Engineering Aspects 2015;484:457-62. [DOI: 10.1016/j.colsurfa.2015.08.028] [Cited by in Crossref: 3] [Cited by in F6Publishing: 2] [Article Influence: 0.4] [Reference Citation Analysis]
26 Go DP, Harvie DJE, Tirtaatmadja N, Gras SL, O'connor AJ. A Simple, Scalable Process for the Production of Porous Polymer Microspheres by Ink-Jetting Combined with Thermally Induced Phase Separation. Part Part Syst Charact 2014;31:685-98. [DOI: 10.1002/ppsc.201300298] [Cited by in Crossref: 18] [Cited by in F6Publishing: 11] [Article Influence: 2.3] [Reference Citation Analysis]
27 Bee S, Hamid ZAA, Mariatti M, Yahaya BH, Lim K, Bee S, Sin LT. Approaches to Improve Therapeutic Efficacy of Biodegradable PLA/PLGA Microspheres: A Review. Polymer Reviews 2017;58:495-536. [DOI: 10.1080/15583724.2018.1437547] [Cited by in Crossref: 26] [Cited by in F6Publishing: 9] [Article Influence: 6.5] [Reference Citation Analysis]
28 Zhou M, Shen L, Lin X, Hong Y, Feng Y. Design and pharmaceutical applications of porous particles. RSC Adv 2017;7:39490-501. [DOI: 10.1039/c7ra06829h] [Cited by in Crossref: 22] [Article Influence: 4.4] [Reference Citation Analysis]
29 Cheng F, Peng X, Meng G, Pu Y, Luo K, He B. Poly(ester-thioether) microspheres co-loaded with erlotinib and α-tocopheryl succinate for combinational therapy of non-small cell lung cancer. J Mater Chem B 2020;8:1728-38. [PMID: 32022097 DOI: 10.1039/c9tb02840d] [Cited by in Crossref: 7] [Cited by in F6Publishing: 3] [Article Influence: 7.0] [Reference Citation Analysis]
30 Ghaffar A, Verschuren P, Geenevasen J, Handels T, Berard J, Plum B, Dias A, Schoenmakers P, van der Wal S. Fast in vitro hydrolytic degradation of polyester urethane acrylate biomaterials: Structure elucidation, separation and quantification of degradation products. Journal of Chromatography A 2011;1218:449-58. [DOI: 10.1016/j.chroma.2010.11.053] [Cited by in Crossref: 17] [Cited by in F6Publishing: 11] [Article Influence: 1.5] [Reference Citation Analysis]
31 Chaturvedi K, Ganguly K, More UA, Reddy KR, Dugge T, Naik B, Aminabhavi TM, Noolvi MN. Sodium alginate in drug delivery and biomedical areas. Natural Polysaccharides in Drug Delivery and Biomedical Applications. Elsevier; 2019. pp. 59-100. [DOI: 10.1016/b978-0-12-817055-7.00003-0] [Cited by in Crossref: 6] [Article Influence: 2.0] [Reference Citation Analysis]
32 Zhang B, Han Z, Duan K, Mu Y, Weng J. Multilayered pore-closed PLGA microsphere delivering OGP and BMP-2 in sequential release patterns for the facilitation of BMSCs osteogenic differentiation: MULTILAYERED PORE-CLOSED PLGA MICROSPHERE. J Biomed Mater Res 2018;106:95-105. [DOI: 10.1002/jbm.a.36210] [Cited by in Crossref: 17] [Cited by in F6Publishing: 10] [Article Influence: 3.4] [Reference Citation Analysis]
33 Sayed E, Haj-Ahmad R, Ruparelia K, Arshad MS, Chang MW, Ahmad Z. Porous Inorganic Drug Delivery Systems-a Review. AAPS PharmSciTech 2017;18:1507-25. [PMID: 28247293 DOI: 10.1208/s12249-017-0740-2] [Cited by in Crossref: 30] [Cited by in F6Publishing: 21] [Article Influence: 6.0] [Reference Citation Analysis]
34 Wei Y, Wang Y, Zhang H, Zhou W, Ma G. A novel strategy for the preparation of porous microspheres and its application in peptide drug loading. Journal of Colloid and Interface Science 2016;478:46-53. [DOI: 10.1016/j.jcis.2016.05.045] [Cited by in Crossref: 39] [Cited by in F6Publishing: 34] [Article Influence: 6.5] [Reference Citation Analysis]
35 Lee Y, Sah H. Simple emulsion technique as an innovative template for preparation of porous, spongelike poly(lactide-co-glycolide) microspheres with pore-closing capability. J Mater Sci 2016;51:6257-74. [DOI: 10.1007/s10853-016-9923-6] [Cited by in Crossref: 7] [Cited by in F6Publishing: 4] [Article Influence: 1.2] [Reference Citation Analysis]
36 Kumar PM, Ghosh A. Development and evaluation of silver sulfadiazine loaded microsponge based gel for partial thickness (second degree) burn wounds. European Journal of Pharmaceutical Sciences 2017;96:243-54. [DOI: 10.1016/j.ejps.2016.09.038] [Cited by in Crossref: 35] [Cited by in F6Publishing: 31] [Article Influence: 7.0] [Reference Citation Analysis]
37 Song Z, Shi B, Ding J, Zhuang X, Zhang X, Fu C, Chen X. Prevention of postoperative tendon adhesion by biodegradable electrospun membrane of poly(lactide-co-glycolide). Chin J Polym Sci 2015;33:587-96. [DOI: 10.1007/s10118-015-1611-5] [Cited by in Crossref: 8] [Cited by in F6Publishing: 6] [Article Influence: 1.1] [Reference Citation Analysis]
38 Culver HR, Steichen SD, Peppas NA. A Closer Look at the Impact of Molecular Imprinting on Adsorption Capacity and Selectivity for Protein Templates. Biomacromolecules 2016;17:4045-53. [PMID: 27936715 DOI: 10.1021/acs.biomac.6b01482] [Cited by in Crossref: 24] [Cited by in F6Publishing: 23] [Article Influence: 4.0] [Reference Citation Analysis]
39 Cocks E, Alpar O, Somavarapu S, Greenleaf D. Impact of surfactant selection on the formulation and characterization of microparticles for pulmonary drug delivery. Drug Dev Ind Pharm 2015;41:522-8. [PMID: 24650006 DOI: 10.3109/03639045.2014.884117] [Cited by in Crossref: 4] [Cited by in F6Publishing: 4] [Article Influence: 0.5] [Reference Citation Analysis]
40 Lin C, Yuan L, Gu A, Chen F, Liang G. The synthesis of porous crosslinked poly(phenylene oxide)-epoxy polymer microspheres. Materials Letters 2013;95:114-6. [DOI: 10.1016/j.matlet.2012.12.088] [Cited by in Crossref: 1] [Cited by in F6Publishing: 1] [Article Influence: 0.1] [Reference Citation Analysis]
41 Mistry PH, Mohapatra SK, Dash AK. Effect of high-pressure homogenization and stabilizers on the physicochemical properties of curcumin-loaded glycerol monooleate/chitosan nanostructures. Nanomedicine 2012;7:1863-76. [DOI: 10.2217/nnm.12.49] [Cited by in Crossref: 20] [Cited by in F6Publishing: 14] [Article Influence: 2.0] [Reference Citation Analysis]