BPG is committed to discovery and dissemination of knowledge
Cited by in F6Publishing
For: Pilla S, Kramschuster A, Lee J, Clemons C, Gong S, Turng L. Microcellular processing of polylactide–hyperbranched polyester–nanoclay composites. J Mater Sci 2010;45:2732-46. [DOI: 10.1007/s10853-010-4261-6] [Cited by in Crossref: 69] [Cited by in F6Publishing: 44] [Article Influence: 5.8] [Reference Citation Analysis]
Number Citing Articles
1 Dlouhá J, Suryanegara L, Yano H. Cellulose nanofibre–poly(lactic acid) microcellular foams exhibiting high tensile toughness. Reactive and Functional Polymers 2014;85:201-7. [DOI: 10.1016/j.reactfunctpolym.2014.07.016] [Cited by in Crossref: 24] [Cited by in F6Publishing: 10] [Article Influence: 3.0] [Reference Citation Analysis]
2 Spoljaric S, Shanks RA. Novel polyhedral oligomeric silsesquioxane-substituted dendritic polyester tougheners for linear thermoplastic polyurethane. J Appl Polym Sci 2012;126:E440-54. [DOI: 10.1002/app.36773] [Cited by in Crossref: 14] [Cited by in F6Publishing: 4] [Article Influence: 1.4] [Reference Citation Analysis]
3 Tisserat B, Joshee N, Mahapatra AK, Selling GW, Finkenstadt VL. Physical and mechanical properties of extruded poly(lactic acid)-based Paulownia elongata biocomposites. Industrial Crops and Products 2013;44:88-96. [DOI: 10.1016/j.indcrop.2012.10.030] [Cited by in Crossref: 26] [Cited by in F6Publishing: 8] [Article Influence: 2.9] [Reference Citation Analysis]
4 Sutivisedsak N, Cheng HN, Burks CS, Johnson JA, Siegel JP, Civerolo EL, Biswas A. Use of Nutshells as Fillers in Polymer Composites. J Polym Environ 2012;20:305-14. [DOI: 10.1007/s10924-012-0420-y] [Cited by in Crossref: 33] [Article Influence: 3.3] [Reference Citation Analysis]
5 Ganjaee Sari M, Ramezanzadeh B, Shahbazi M, Pakdel A. Influence of nanoclay particles modification by polyester-amide hyperbranched polymer on the corrosion protective performance of the epoxy nanocomposite. Corrosion Science 2015;92:162-72. [DOI: 10.1016/j.corsci.2014.11.047] [Cited by in Crossref: 91] [Cited by in F6Publishing: 43] [Article Influence: 13.0] [Reference Citation Analysis]
6 Javadi A, Srithep Y, Pilla S, Clemons CC, Gong S, Turng L. Microcellular poly(hydroxybutyrate-co-hydroxyvalerate)-hyperbranched polymer-nanoclay nanocomposites. Polym Eng Sci 2011;51:1815-26. [DOI: 10.1002/pen.21972] [Cited by in Crossref: 14] [Cited by in F6Publishing: 9] [Article Influence: 1.3] [Reference Citation Analysis]
7 Gao D, Wang J, Wang Y, Zhang P. Effect of melt viscosity on the cell morphology and properties of poly(lactic acid) foams. Journal of Cellular Plastics 2016;52:175-87. [DOI: 10.1177/0021955x14566210] [Cited by in Crossref: 9] [Article Influence: 1.1] [Reference Citation Analysis]
8 Ganjaee Sari M, Ramezanzadeh B, Pakdel AS, Shahbazi M. A physico-mechanical investigation of a novel hyperbranched polymer-modified clay/epoxy nanocomposite coating. Progress in Organic Coatings 2016;99:263-73. [DOI: 10.1016/j.porgcoat.2016.06.003] [Cited by in Crossref: 25] [Cited by in F6Publishing: 10] [Article Influence: 4.2] [Reference Citation Analysis]
9 Lee RE, Azdast T, Wang G, Wang X, Lee PC, Park CB. Highly expanded fine-cell foam of polylactide/polyhydroxyalkanoate/nano-fibrillated polytetrafluoroethylene composites blown with mold-opening injection molding. International Journal of Biological Macromolecules 2020;155:286-92. [DOI: 10.1016/j.ijbiomac.2020.03.212] [Cited by in Crossref: 9] [Cited by in F6Publishing: 3] [Article Influence: 4.5] [Reference Citation Analysis]
10 Li S, He G, Liao X, Park CB, Yang Q, Li G. Introduction of a long-chain branching structure by ultraviolet-induced reactive extrusion to improve cell morphology and processing properties of polylactide foam. RSC Adv 2017;7:6266-77. [DOI: 10.1039/c6ra26457c] [Cited by in Crossref: 27] [Article Influence: 5.4] [Reference Citation Analysis]
11 Wong A, Park CB. The effects of extensional stresses on the foamability of polystyrene–talc composites blown with carbon dioxide. Chemical Engineering Science 2012;75:49-62. [DOI: 10.1016/j.ces.2012.02.040] [Cited by in Crossref: 91] [Cited by in F6Publishing: 53] [Article Influence: 9.1] [Reference Citation Analysis]
12 Mi H, Li Z, Turng L, Sun Y, Gong S. Silver nanowire/thermoplastic polyurethane elastomer nanocomposites: Thermal, mechanical, and dielectric properties. Materials & Design (1980-2015) 2014;56:398-404. [DOI: 10.1016/j.matdes.2013.11.029] [Cited by in Crossref: 82] [Cited by in F6Publishing: 41] [Article Influence: 10.3] [Reference Citation Analysis]
13 Najafi N, Heuzey M, Carreau PJ, Therriault D, Park CB. Mechanical and morphological properties of injection molded linear and branched-polylactide (PLA) nanocomposite foams. European Polymer Journal 2015;73:455-65. [DOI: 10.1016/j.eurpolymj.2015.11.003] [Cited by in Crossref: 39] [Cited by in F6Publishing: 18] [Article Influence: 5.6] [Reference Citation Analysis]
14 Moshiul Alam A, Beg M, Reddy Prasad D, Khan M, Mina M. Structures and performances of simultaneous ultrasound and alkali treated oil palm empty fruit bunch fiber reinforced poly(lactic acid) composites. Composites Part A: Applied Science and Manufacturing 2012;43:1921-9. [DOI: 10.1016/j.compositesa.2012.06.012] [Cited by in Crossref: 65] [Cited by in F6Publishing: 22] [Article Influence: 6.5] [Reference Citation Analysis]
15 Jeon B, Kim HK, Cha SW, Lee SJ, Han M, Lee KS. Microcellular foam processing of biodegradable polymers — review. Int J Precis Eng Manuf 2013;14:679-90. [DOI: 10.1007/s12541-013-0092-0] [Cited by in Crossref: 20] [Cited by in F6Publishing: 8] [Article Influence: 2.2] [Reference Citation Analysis]
16 Wu F, Lan X, Ji D, Liu Z, Yang W, Yang M. Grafting polymerization of polylactic acid on the surface of nano-SiO 2 and properties of PLA/PLA-grafted-SiO 2 nanocomposites. J Appl Polym Sci 2013;129:3019-27. [DOI: 10.1002/app.38585] [Cited by in Crossref: 27] [Cited by in F6Publishing: 16] [Article Influence: 3.0] [Reference Citation Analysis]
17 Kang CS, Baik DH. Preparation and Characterization of Thermally Stable Polybenzoxazole Copolymer Films Fabricated from Their Precursors. Fibers Polym 2019;20:2443-52. [DOI: 10.1007/s12221-019-1110-3] [Cited by in Crossref: 1] [Article Influence: 0.3] [Reference Citation Analysis]
18 Bouzouita A, Notta-cuvier D, Raquez J, Lauro F, Dubois P. Poly(lactic acid)-Based Materials for Automotive Applications. In: Di Lorenzo ML, Androsch R, editors. Industrial Applications of Poly(lactic acid). Cham: Springer International Publishing; 2018. pp. 177-219. [DOI: 10.1007/12_2017_10] [Cited by in Crossref: 6] [Cited by in F6Publishing: 2] [Article Influence: 1.2] [Reference Citation Analysis]
19 Pantani R, Volpe V, Titomanlio G. Foam injection molding of poly(lactic acid) with environmentally friendly physical blowing agents. Journal of Materials Processing Technology 2014;214:3098-107. [DOI: 10.1016/j.jmatprotec.2014.07.002] [Cited by in Crossref: 44] [Cited by in F6Publishing: 19] [Article Influence: 5.5] [Reference Citation Analysis]
20 Nofar M, Park CB. Poly (lactic acid) foaming. Progress in Polymer Science 2014;39:1721-41. [DOI: 10.1016/j.progpolymsci.2014.04.001] [Cited by in Crossref: 280] [Cited by in F6Publishing: 125] [Article Influence: 35.0] [Reference Citation Analysis]
21 Ameli A, Nofar M, Jahani D, Rizvi G, Park C. Development of high void fraction polylactide composite foams using injection molding: Crystallization and foaming behaviors. Chemical Engineering Journal 2015;262:78-87. [DOI: 10.1016/j.cej.2014.09.087] [Cited by in Crossref: 105] [Cited by in F6Publishing: 50] [Article Influence: 15.0] [Reference Citation Analysis]
22 Zhao H, Turng L. Mechanical performance of microcellular injection molded biocomposites from green plastics. Biocomposites. Elsevier; 2015. pp. 141-60. [DOI: 10.1016/b978-1-78242-373-7.00015-9] [Cited by in Crossref: 4] [Article Influence: 0.6] [Reference Citation Analysis]
23 Volpe V, Pantani R. Foam injection molding of poly(lactic) acid: Effect of back pressure on morphology and mechanical properties. J Appl Polym Sci 2015;132:n/a-n/a. [DOI: 10.1002/app.42612] [Cited by in Crossref: 14] [Cited by in F6Publishing: 6] [Article Influence: 2.0] [Reference Citation Analysis]
24 Roy PK, Hakkarainen M, Albertsson A. Nanoclay effects on the degradation process and product patterns of polylactide. Polymer Degradation and Stability 2012;97:1254-60. [DOI: 10.1016/j.polymdegradstab.2012.05.032] [Cited by in Crossref: 39] [Cited by in F6Publishing: 28] [Article Influence: 3.9] [Reference Citation Analysis]
25 Ameli A, Jahani D, Nofar M, Jung P, Park C. Development of high void fraction polylactide composite foams using injection molding: Mechanical and thermal insulation properties. Composites Science and Technology 2014;90:88-95. [DOI: 10.1016/j.compscitech.2013.10.019] [Cited by in Crossref: 111] [Cited by in F6Publishing: 61] [Article Influence: 13.9] [Reference Citation Analysis]
26 Borkotoky SS, Dhar P, Katiyar V. Biodegradable poly (lactic acid)/Cellulose nanocrystals (CNCs) composite microcellular foam: Effect of nanofillers on foam cellular morphology, thermal and wettability behavior. International Journal of Biological Macromolecules 2018;106:433-46. [DOI: 10.1016/j.ijbiomac.2017.08.036] [Cited by in Crossref: 46] [Cited by in F6Publishing: 25] [Article Influence: 11.5] [Reference Citation Analysis]
27 Chen K, Zhou X, Wang X. Synthesis and Application of a Hyperbranched Polyester Quaternary Ammonium Surfactant. J Surfact Deterg 2014;17:1081-8. [DOI: 10.1007/s11743-014-1624-z] [Cited by in Crossref: 6] [Cited by in F6Publishing: 3] [Article Influence: 0.8] [Reference Citation Analysis]
28 Almasi H, Ghanbarzadeh B, Dehghannya J, Entezami AA, Asl AK. Novel nanocomposites based on fatty acid modified cellulose nanofibers/poly(lactic acid): Morphological and physical properties. Food Packaging and Shelf Life 2015;5:21-31. [DOI: 10.1016/j.fpsl.2015.04.003] [Cited by in Crossref: 65] [Cited by in F6Publishing: 30] [Article Influence: 9.3] [Reference Citation Analysis]
29 Pirani S, Abushammala HMN, Hashaikeh R. Preparation and characterization of electrospun PLA/nanocrystalline cellulose-based composites. J Appl Polym Sci 2013;130:3345-54. [DOI: 10.1002/app.39576] [Cited by in Crossref: 39] [Cited by in F6Publishing: 29] [Article Influence: 4.3] [Reference Citation Analysis]
30 Zhao H, Cui Z, Wang X, Turng L, Peng X. Processing and characterization of solid and microcellular poly(lactic acid)/polyhydroxybutyrate-valerate (PLA/PHBV) blends and PLA/PHBV/Clay nanocomposites. Composites Part B: Engineering 2013;51:79-91. [DOI: 10.1016/j.compositesb.2013.02.034] [Cited by in Crossref: 114] [Cited by in F6Publishing: 71] [Article Influence: 12.7] [Reference Citation Analysis]
31 Najafi N, Heuzey M, Carreau PJ, Therriault D, Park CB. Rheological and foaming behavior of linear and branched polylactides. Rheol Acta 2014;53:779-90. [DOI: 10.1007/s00397-014-0801-3] [Cited by in Crossref: 61] [Cited by in F6Publishing: 26] [Article Influence: 7.6] [Reference Citation Analysis]
32 Pramanik S, Konwarh R, Sagar K, Konwar BK, Karak N. Bio-degradable vegetable oil based hyperbranched poly(ester amide) as an advanced surface coating material. Progress in Organic Coatings 2013;76:689-97. [DOI: 10.1016/j.porgcoat.2012.12.011] [Cited by in Crossref: 43] [Cited by in F6Publishing: 27] [Article Influence: 4.8] [Reference Citation Analysis]
33 Liu T, Zhou S, Lei Y, Chen Z, Wang X, Li J, Luo S. Morphology and Properties of Injection Molded Microcellular Poly(ether imide) (PEI)/Polypropylene (PP) Foams. Ind Eng Chem Res 2014;53:19934-42. [DOI: 10.1021/ie5023145] [Cited by in Crossref: 12] [Cited by in F6Publishing: 5] [Article Influence: 1.5] [Reference Citation Analysis]
34 Borkotoky SS, Pal AK, Katiyar V. Poly(lactic acid)/modified chitosan-based microcellular foams: Thermal and crystallization behavior with wettability and porosimetric investigations. J Appl Polym Sci 2019;136:47236. [DOI: 10.1002/app.47236] [Cited by in Crossref: 3] [Cited by in F6Publishing: 1] [Article Influence: 0.8] [Reference Citation Analysis]
35 Dong G, Zhao G, Guan Y, Wang G, Wang X. The cell forming process of microcellular injection-molded parts. J Appl Polym Sci 2014;131:n/a-n/a. [DOI: 10.1002/app.40365] [Cited by in Crossref: 8] [Cited by in F6Publishing: 3] [Article Influence: 1.0] [Reference Citation Analysis]
36 Tisserat B, Reifschneider L, Joshee N, Finkenstadt VL. Evaluation of Paulownia elongata wood polyethylene composites. Journal of Thermoplastic Composite Materials 2015;28:1301-20. [DOI: 10.1177/0892705713505856] [Cited by in Crossref: 9] [Cited by in F6Publishing: 3] [Article Influence: 1.0] [Reference Citation Analysis]
37 Ostafinska A, Fortelný I, Hodan J, Krejčíková S, Nevoralová M, Kredatusová J, Kruliš Z, Kotek J, Šlouf M. Strong synergistic effects in PLA/PCL blends: Impact of PLA matrix viscosity. Journal of the Mechanical Behavior of Biomedical Materials 2017;69:229-41. [DOI: 10.1016/j.jmbbm.2017.01.015] [Cited by in Crossref: 44] [Cited by in F6Publishing: 23] [Article Influence: 8.8] [Reference Citation Analysis]
38 Zeng X, Zhang Y, Nyström AM. Endocytic uptake and intracellular trafficking of bis-MPA-based hyperbranched copolymer micelles in breast cancer cells. Biomacromolecules 2012;13:3814-22. [PMID: 23035906 DOI: 10.1021/bm301281k] [Cited by in Crossref: 50] [Cited by in F6Publishing: 46] [Article Influence: 5.0] [Reference Citation Analysis]
39 Azdast T, Hasanzadeh R. Increasing cell density/decreasing cell size to produce microcellular and nanocellular thermoplastic foams: A review. Journal of Cellular Plastics 2021;57:769-97. [DOI: 10.1177/0021955x20959301] [Cited by in Crossref: 7] [Cited by in F6Publishing: 2] [Article Influence: 3.5] [Reference Citation Analysis]
40 Javadi A, Srithep Y, Clemons CC, Turng L, Gong S. Processing of poly(hydroxybutyrate-co-hydroxyvalerate)-based bionanocomposite foams using supercritical fluids. J Mater Res 2012;27:1506-17. [DOI: 10.1557/jmr.2012.74] [Cited by in Crossref: 12] [Cited by in F6Publishing: 7] [Article Influence: 1.2] [Reference Citation Analysis]
41 Dong G, Zhao G, Guan Y, Li S, Wang X. Formation mechanism and structural characteristics of unfoamed skin layer in microcellular injection-molded parts. Journal of Cellular Plastics 2016;52:419-39. [DOI: 10.1177/0021955x15577149] [Cited by in Crossref: 14] [Article Influence: 2.0] [Reference Citation Analysis]
42 Moshiul Alam A, Beg M, Mina M, Mamun A, Bledzki A. Degradation and stability of green composites fabricated from oil palm empty fruit bunch fiber and polylactic acid: Effect of fiber length. Journal of Composite Materials 2015;49:3103-14. [DOI: 10.1177/0021998314560219] [Cited by in Crossref: 8] [Cited by in F6Publishing: 2] [Article Influence: 1.0] [Reference Citation Analysis]
43 Zhao H, Zhao G. Mechanical and thermal properties of conventional and microcellular injection molded poly (lactic acid)/poly (ε-caprolactone) blends. Journal of the Mechanical Behavior of Biomedical Materials 2016;53:59-67. [DOI: 10.1016/j.jmbbm.2015.08.002] [Cited by in Crossref: 28] [Cited by in F6Publishing: 16] [Article Influence: 4.7] [Reference Citation Analysis]
44 Tang H, Fan X, Shen Z, Zhou Q. One-pot synthesis of hyperbranched poly(aryl ether ketone)s for the modification of bismaleimide resins. Polym Eng Sci 2014;54:1675-85. [DOI: 10.1002/pen.23715] [Cited by in Crossref: 11] [Cited by in F6Publishing: 5] [Article Influence: 1.2] [Reference Citation Analysis]
45 Ameli A, Jahani D, Nofar M, Jung PU, Park CB. Processing and characterization of solid and foamed injection-molded polylactide with talc. Journal of Cellular Plastics 2013;49:351-74. [DOI: 10.1177/0021955x13481993] [Cited by in Crossref: 52] [Cited by in F6Publishing: 1] [Article Influence: 5.8] [Reference Citation Analysis]
46 Zhao H, Cui Z, Sun X, Turng L, Peng X. Morphology and Properties of Injection Molded Solid and Microcellular Polylactic Acid/Polyhydroxybutyrate-Valerate (PLA/PHBV) Blends. Ind Eng Chem Res 2013;52:2569-81. [DOI: 10.1021/ie301573y] [Cited by in Crossref: 86] [Cited by in F6Publishing: 53] [Article Influence: 9.6] [Reference Citation Analysis]
47 Sutivisedsak N, Cheng H, Dowd M, Selling G, Biswas A. Evaluation of cotton byproducts as fillers for poly(lactic acid) and low density polyethylene. Industrial Crops and Products 2012;36:127-34. [DOI: 10.1016/j.indcrop.2011.08.016] [Cited by in Crossref: 39] [Cited by in F6Publishing: 20] [Article Influence: 3.9] [Reference Citation Analysis]
48 Pirani SI, Krishnamachari P, Hashaikeh R. Optimum loading level of nanoclay in PLA nanocomposites: Impact on the mechanical properties and glass transition temperature. Journal of Thermoplastic Composite Materials 2014;27:1461-78. [DOI: 10.1177/0892705712473627] [Cited by in Crossref: 15] [Cited by in F6Publishing: 2] [Article Influence: 1.7] [Reference Citation Analysis]
49 Volpe V, Pantani R. Effect of processing condition on properties of polylactic acid parts obtained by foam injection molding. Journal of Cellular Plastics 2017;53:491-502. [DOI: 10.1177/0021955x16670589] [Cited by in Crossref: 6] [Cited by in F6Publishing: 1] [Article Influence: 1.0] [Reference Citation Analysis]
50 Zhang X, Ding W, Chang E, Chen X, Chen J, Park CB, Shen C. Foaming Behaviors and Mechanical Properties of Injection-Molded Polylactide/Cotton-Fiber Composites. Ind Eng Chem Res 2020;59:17885-93. [DOI: 10.1021/acs.iecr.0c03348] [Cited by in Crossref: 2] [Cited by in F6Publishing: 1] [Article Influence: 1.0] [Reference Citation Analysis]