BPG is committed to discovery and dissemination of knowledge
Cited by in F6Publishing
For: Guzzi EA, Tibbitt MW. Additive Manufacturing of Precision Biomaterials. Adv Mater 2020;32:e1901994. [PMID: 31423679 DOI: 10.1002/adma.201901994] [Cited by in Crossref: 65] [Cited by in F6Publishing: 48] [Article Influence: 32.5] [Reference Citation Analysis]
Number Citing Articles
1 Chen P, Su J, Wang H, Yang L, Cai H, Li M, Li Z, Liu J, Wen S, Zhou Y, Yan C, Shi Y. Mechanical properties and microstructure characteristics of lattice-surfaced PEEK cage fabricated by high-temperature laser powder bed fusion. Journal of Materials Science & Technology 2022;125:105-17. [DOI: 10.1016/j.jmst.2022.03.009] [Cited by in Crossref: 1] [Cited by in F6Publishing: 1] [Article Influence: 1.0] [Reference Citation Analysis]
2 Jang T, Park SJ, Lee JE, Yang J, Park S, Jun MB, Kim YW, Aranas C, Choi JP, Zou Y, Advincula RC, Zheng Y, Jang HL, Cho N, Jung H, Kim SH. Topography‐Supported Nanoarchitectonics of Hybrid Scaffold for Systematically Modulated Bone Regeneration and Remodeling. Adv Funct Materials. [DOI: 10.1002/adfm.202206863] [Reference Citation Analysis]
3 Lv X, Ye F, Cheng L, Zhang L. A versatile thermally initiated crosslinking binder for additive manufacturing of strong structures. Additive Manufacturing 2022;56:102893. [DOI: 10.1016/j.addma.2022.102893] [Reference Citation Analysis]
4 Griffin A, Guo Y, Hu Z, Zhang J, Chen Y, Qiang Z. Scalable methods for directional assembly of fillers in polymer composites: Creating pathways for improving material properties. Polymer Composites. [DOI: 10.1002/pc.26905] [Reference Citation Analysis]
5 Verma VK, Kamble SS, Ganapathy L, Tarei PK. Overcoming the post-processing barriers for 3D-printed medical models. RPJ 2022. [DOI: 10.1108/rpj-08-2021-0208] [Cited by in Crossref: 1] [Cited by in F6Publishing: 1] [Article Influence: 1.0] [Reference Citation Analysis]
6 Berger V, Luo Z, Leroux JC. 3D printing of a controlled fluoride delivery device for the prevention and treatment of tooth decay. J Control Release 2022;348:870-80. [PMID: 35752251 DOI: 10.1016/j.jconrel.2022.06.032] [Reference Citation Analysis]
7 Miksch CE, Skillin NP, Kirkpatrick BE, Hach GK, Rao VV, White TJ, Anseth KS. 4D Printing of Extrudable and Degradable Poly(Ethylene Glycol) Microgel Scaffolds for Multidimensional Cell Culture. Small 2022;:e2200951. [PMID: 35732614 DOI: 10.1002/smll.202200951] [Cited by in Crossref: 1] [Cited by in F6Publishing: 1] [Article Influence: 1.0] [Reference Citation Analysis]
8 Tan RPT, Cheng JJW, Parikh BH, Wong JHM, Soh BW, Chang JJ, Tran KC, Lee Y, Chee PL, Boo YJ, Lin Q, Jiang L, Su X, Lim JY, Loh XJ, Xue K. Versatile and Extendable Boronate-Based Tunable Hydrogel Networks for Patterning Applications. ACS Appl Polym Mater . [DOI: 10.1021/acsapm.2c00614] [Reference Citation Analysis]
9 Sakai S, Morita T. One-Step FRESH Bioprinting of Low-Viscosity Silk Fibroin Inks. ACS Biomater Sci Eng 2022;8:2589-97. [PMID: 35608818 DOI: 10.1021/acsbiomaterials.2c00269] [Reference Citation Analysis]
10 Han Y, King M, Tikhomirov E, Barasa P, Souza CDS, Lindh J, Baltriukiene D, Ferraiuolo L, Azzouz M, Gullo MR, Kozlova EN. Towards 3D Bioprinted Spinal Cord Organoids. IJMS 2022;23:5788. [DOI: 10.3390/ijms23105788] [Reference Citation Analysis]
11 Kharbikar BN, Mohindra P, Desai TA. Biomaterials to enhance stem cell transplantation. Cell Stem Cell 2022;29:692-721. [PMID: 35483364 DOI: 10.1016/j.stem.2022.04.002] [Cited by in Crossref: 1] [Article Influence: 1.0] [Reference Citation Analysis]
12 Lieu WY, Fang D, Tay KJ, Li XL, Chu WC, Ang YS, Li D, Ang L, Wang Y, Yang HY. Progress on 3D‐Printed Metal‐Organic Frameworks with Hierarchical Structures. Adv Materials Technologies. [DOI: 10.1002/admt.202200023] [Reference Citation Analysis]
13 Mu X, Gonzalez-Obeso C, Xia Z, Sahoo JK, Li G, Cebe P, Zhang YS, Kaplan DL. 3D Printing of Monolithic Proteinaceous Cantilevers Using Regenerated Silk Fibroin. Molecules 2022;27:2148. [PMID: 35408547 DOI: 10.3390/molecules27072148] [Reference Citation Analysis]
14 Carberry BJ, Hernandez JJ, Dobson A, Bowman CN, Anseth KS. Kinetic Analysis of Degradation in Thioester Cross-linked Hydrogels as a Function of Thiol Concentration, p Ka , and Presentation. Macromolecules. [DOI: 10.1021/acs.macromol.1c02396] [Reference Citation Analysis]
15 Bovone G, Guzzi EA, Bernhard S, Weber T, Dranseikiene D, Tibbitt MW. Supramolecular Reinforcement of Polymer-Nanoparticle Hydrogels for Modular Materials Design. Adv Mater 2022;34:e2106941. [PMID: 34954875 DOI: 10.1002/adma.202106941] [Cited by in Crossref: 6] [Cited by in F6Publishing: 1] [Article Influence: 6.0] [Reference Citation Analysis]
16 Huang G, Wu L, Hu J, Zhou X, He F, Wan L, Pan S, Faot F. Main Applications and Recent Research Progresses of Additive Manufacturing in Dentistry. BioMed Research International 2022;2022:1-26. [DOI: 10.1155/2022/5530188] [Cited by in Crossref: 1] [Cited by in F6Publishing: 1] [Article Influence: 1.0] [Reference Citation Analysis]
17 Charlet A, Hirsch M, Schreiber S, Amstad E. Recycling of Load-Bearing 3D Printable Double Network Granular Hydrogels. Small 2022;:e2107128. [PMID: 35174951 DOI: 10.1002/smll.202107128] [Cited by in Crossref: 3] [Cited by in F6Publishing: 2] [Article Influence: 3.0] [Reference Citation Analysis]
18 Müller FJ, Fenton OS. Additive Manufacturing Approaches toward the Fabrication of Biomaterials. Adv Materials Inter 2022;9:2100670. [DOI: 10.1002/admi.202100670] [Cited by in Crossref: 1] [Article Influence: 1.0] [Reference Citation Analysis]
19 Webber MJ. Embracing Simplicity in Biomaterials Design. Biomaterials and Biosystems 2022. [DOI: 10.1016/j.bbiosy.2022.100043] [Reference Citation Analysis]
20 Webber MJ, Tibbitt MW. Dynamic and reconfigurable materials from reversible network interactions. Nat Rev Mater. [DOI: 10.1038/s41578-021-00412-x] [Cited by in Crossref: 10] [Cited by in F6Publishing: 8] [Article Influence: 10.0] [Reference Citation Analysis]
21 Suwardi A, Wang F, Xue K, Han MY, Teo P, Wang P, Wang S, Liu Y, Ye E, Li Z, Loh XJ. Machine Learning-Driven Biomaterials Evolution. Adv Mater 2022;34:e2102703. [PMID: 34617632 DOI: 10.1002/adma.202102703] [Cited by in Crossref: 8] [Cited by in F6Publishing: 6] [Article Influence: 8.0] [Reference Citation Analysis]
22 Caballero D, Abreu CM, Lima AC, Neves NN, Reis RL, Kundu SC. Precision biomaterials in cancer theranostics and modelling. Biomaterials 2022;280:121299. [PMID: 34871880 DOI: 10.1016/j.biomaterials.2021.121299] [Cited by in Crossref: 6] [Cited by in F6Publishing: 2] [Article Influence: 6.0] [Reference Citation Analysis]
23 Wang Y, Huang H, Jia G, Zeng H, Yuan G. Fatigue and dynamic biodegradation behavior of additively manufactured Mg scaffolds. Acta Biomater 2021;135:705-22. [PMID: 34469790 DOI: 10.1016/j.actbio.2021.08.040] [Cited by in Crossref: 2] [Cited by in F6Publishing: 2] [Article Influence: 2.0] [Reference Citation Analysis]
24 Shahzad A, Lazoglu I. Direct ink writing (DIW) of structural and functional ceramics: Recent achievements and future challenges. Composites Part B: Engineering 2021;225:109249. [DOI: 10.1016/j.compositesb.2021.109249] [Cited by in Crossref: 15] [Cited by in F6Publishing: 8] [Article Influence: 15.0] [Reference Citation Analysis]
25 de Kort BJ, Koch SE, Wissing TB, Krebber MM, Bouten CVC, Smits AIPM. Immuno-regenerative biomaterials for in situ cardiovascular tissue engineering - Do patient characteristics warrant precision engineering? Adv Drug Deliv Rev 2021;178:113960. [PMID: 34481036 DOI: 10.1016/j.addr.2021.113960] [Cited by in Crossref: 6] [Cited by in F6Publishing: 3] [Article Influence: 6.0] [Reference Citation Analysis]
26 Ragelle H, Rahimian S, Guzzi EA, Westenskow PD, Tibbitt MW, Schwach G, Langer R. Additive manufacturing in drug delivery: Innovative drug product design and opportunities for industrial application. Adv Drug Deliv Rev 2021;178:113990. [PMID: 34600963 DOI: 10.1016/j.addr.2021.113990] [Cited by in Crossref: 4] [Cited by in F6Publishing: 3] [Article Influence: 4.0] [Reference Citation Analysis]
27 Shariati K, Ling AS, Fuchs S, Dillenburger B, Liu W, Ma M. Hylozoic by Design: Converging Material and Biological Complexities for Cell‐Driven Living Materials with 4D Behaviors. Adv Funct Materials 2022;32:2108057. [DOI: 10.1002/adfm.202108057] [Reference Citation Analysis]
28 Guzzi EA, Bischof R, Dranseikiene D, Deshmukh DV, Wahlsten A, Bovone G, Bernhard S, Tibbitt MW. Hierarchical biomaterials via photopatterning-enhanced direct ink writing. Biofabrication 2021;13. [PMID: 34433148 DOI: 10.1088/1758-5090/ac212f] [Reference Citation Analysis]
29 Carberry BJ, Hergert JE, Yavitt FM, Hernandez JJ, Speckl KF, Bowman CN, McLeod RR, Anseth KS. 3D printing of sacrificial thioester elastomers using digital light processing for templating 3D organoid structures in soft biomatrices. Biofabrication 2021;13. [PMID: 34380115 DOI: 10.1088/1758-5090/ac1c98] [Reference Citation Analysis]
30 James BD, Allen JB. Sex-Specific Response to Combinations of Shear Stress and Substrate Stiffness by Endothelial Cells In Vitro. Adv Healthc Mater 2021;10:e2100735. [PMID: 34142471 DOI: 10.1002/adhm.202100735] [Reference Citation Analysis]
31 Sandmeier M, Paunović N, Conti R, Hofmann L, Wang J, Luo Z, Masania K, Wu N, Kleger N, Coulter FB, Studart AR, Grützmacher H, Leroux J, Bao Y. Solvent-Free Three-Dimensional Printing of Biodegradable Elastomers Using Liquid Macrophotoinitiators. Macromolecules 2021;54:7830-9. [DOI: 10.1021/acs.macromol.1c00856] [Cited by in Crossref: 7] [Cited by in F6Publishing: 3] [Article Influence: 7.0] [Reference Citation Analysis]
32 Zhou C, Yang Y, Wang J, Wu Q, Gu Z, Zhou Y, Liu X, Yang Y, Tang H, Ling Q, Wang L, Zang J. Ferromagnetic soft catheter robots for minimally invasive bioprinting. Nat Commun 2021;12:5072. [PMID: 34417473 DOI: 10.1038/s41467-021-25386-w] [Reference Citation Analysis]
33 Gonçalves AM, Moreira A, Weber A, Williams GR, Costa PF. Osteochondral Tissue Engineering: The Potential of Electrospinning and Additive Manufacturing. Pharmaceutics 2021;13:983. [PMID: 34209671 DOI: 10.3390/pharmaceutics13070983] [Cited by in F6Publishing: 1] [Reference Citation Analysis]
34 Salerno A, Netti PA. Review on Computer-Aided Design and Manufacturing of Drug Delivery Scaffolds for Cell Guidance and Tissue Regeneration. Front Bioeng Biotechnol 2021;9:682133. [PMID: 34249885 DOI: 10.3389/fbioe.2021.682133] [Reference Citation Analysis]
35 Zaszczyńska A, Moczulska-Heljak M, Gradys A, Sajkiewicz P. Advances in 3D Printing for Tissue Engineering. Materials (Basel) 2021;14:3149. [PMID: 34201163 DOI: 10.3390/ma14123149] [Reference Citation Analysis]
36 Pugliese R, Beltrami B, Regondi S, Lunetta C. Polymeric biomaterials for 3D printing in medicine: An overview. Annals of 3D Printed Medicine 2021;2:100011. [DOI: 10.1016/j.stlm.2021.100011] [Cited by in Crossref: 10] [Cited by in F6Publishing: 2] [Article Influence: 10.0] [Reference Citation Analysis]
37 Wang Y, Li Z, Hu Q. Emerging self-regulated micro/nano drug delivery devices: A step forward towards intelligent diagnosis and therapy. Nano Today 2021;38:101127. [DOI: 10.1016/j.nantod.2021.101127] [Cited by in Crossref: 5] [Cited by in F6Publishing: 5] [Article Influence: 5.0] [Reference Citation Analysis]
38 Amaral AJR, Gaspar VM, Lavrador P, Mano JF. Double network laminarin-boronic/alginate dynamic bioink for 3D bioprinting cell-laden constructs. Biofabrication 2021;13. [PMID: 34075894 DOI: 10.1088/1758-5090/abfd79] [Cited by in F6Publishing: 1] [Reference Citation Analysis]
39 Caprioli M, Roppolo I, Chiappone A, Larush L, Pirri CF, Magdassi S. 3D-printed self-healing hydrogels via Digital Light Processing. Nat Commun 2021;12:2462. [PMID: 33911075 DOI: 10.1038/s41467-021-22802-z] [Cited by in Crossref: 4] [Cited by in F6Publishing: 2] [Article Influence: 4.0] [Reference Citation Analysis]
40 Kirillova A, Yeazel TR, Asheghali D, Petersen SR, Dort S, Gall K, Becker ML. Fabrication of Biomedical Scaffolds Using Biodegradable Polymers. Chem Rev 2021. [PMID: 33856196 DOI: 10.1021/acs.chemrev.0c01200] [Cited by in Crossref: 3] [Cited by in F6Publishing: 1] [Article Influence: 3.0] [Reference Citation Analysis]
41 Ogueri KS, Ogueri KS, McClinton A, Kan HM, Ude CC, Barajaa MA, Allcock HR, Laurencin CT. In Vivo Evaluation of the Regenerative Capability of Glycylglycine Ethyl Ester-Substituted Polyphosphazene and Poly(lactic-co-glycolic acid) Blends: A Rabbit Critical-Sized Bone Defect Model. ACS Biomater Sci Eng 2021;7:1564-72. [PMID: 33792283 DOI: 10.1021/acsbiomaterials.0c01650] [Cited by in Crossref: 1] [Article Influence: 1.0] [Reference Citation Analysis]
42 Bovone G, Dudaryeva OY, Marco-Dufort B, Tibbitt MW. Engineering Hydrogel Adhesion for Biomedical Applications via Chemical Design of the Junction. ACS Biomater Sci Eng 2021. [PMID: 33792286 DOI: 10.1021/acsbiomaterials.0c01677] [Reference Citation Analysis]
43 Rodzeń K, Sharma PK, McIlhagger A, Mokhtari M, Dave F, Tormey D, Sherlock R, Meenan BJ, Boyd A. The Direct 3D Printing of Functional PEEK/Hydroxyapatite Composites via a Fused Filament Fabrication Approach. Polymers (Basel) 2021;13:545. [PMID: 33673299 DOI: 10.3390/polym13040545] [Cited by in Crossref: 7] [Cited by in F6Publishing: 2] [Article Influence: 7.0] [Reference Citation Analysis]
44 Montoya C, Du Y, Gianforcaro AL, Orrego S, Yang M, Lelkes PI. On the road to smart biomaterials for bone research: definitions, concepts, advances, and outlook. Bone Res 2021;9:12. [PMID: 33574225 DOI: 10.1038/s41413-020-00131-z] [Cited by in Crossref: 5] [Cited by in F6Publishing: 7] [Article Influence: 5.0] [Reference Citation Analysis]
45 Bhuvanesh Kumar M, Sathiya P. Methods and materials for additive manufacturing: A critical review on advancements and challenges. Thin-Walled Structures 2021;159:107228. [DOI: 10.1016/j.tws.2020.107228] [Cited by in Crossref: 11] [Cited by in F6Publishing: 1] [Article Influence: 11.0] [Reference Citation Analysis]
46 Garot C, Bettega G, Picart C. Additive Manufacturing of Material Scaffolds for Bone Regeneration: Toward Application in the Clinics. Adv Funct Mater 2021;31:2006967. [PMID: 33531885 DOI: 10.1002/adfm.202006967] [Cited by in Crossref: 30] [Cited by in F6Publishing: 22] [Article Influence: 30.0] [Reference Citation Analysis]
47 Pérez-pedroza R, Ávila-ramírez A, Khan Z, Moretti M, Hauser CAE, De Santiago GT. Supramolecular Biopolymers for Tissue Engineering. Advances in Polymer Technology 2021;2021:1-23. [DOI: 10.1155/2021/8815006] [Cited by in Crossref: 3] [Cited by in F6Publishing: 1] [Article Influence: 3.0] [Reference Citation Analysis]
48 James BD, Guerin P, Allen JB. Let's Talk About Sex-Biological Sex Is Underreported in Biomaterial Studies. Adv Healthc Mater 2021;10:e2001034. [PMID: 33043626 DOI: 10.1002/adhm.202001034] [Cited by in Crossref: 9] [Cited by in F6Publishing: 9] [Article Influence: 9.0] [Reference Citation Analysis]
49 Andrearczyk A, Konieczny B, Sokołowski J. Additively Manufactured Parts Made of a Polymer Material Used for the Experimental Verification of a Component of a High-Speed Machine with an Optimised Geometry-Preliminary Research. Polymers (Basel) 2020;13:E137. [PMID: 33396352 DOI: 10.3390/polym13010137] [Cited by in Crossref: 3] [Article Influence: 1.5] [Reference Citation Analysis]
50 Li C, Pisignano D, Zhao Y, Xue J. Advances in Medical Applications of Additive Manufacturing. Engineering 2020;6:1222-31. [DOI: 10.1016/j.eng.2020.02.018] [Cited by in Crossref: 13] [Cited by in F6Publishing: 3] [Article Influence: 6.5] [Reference Citation Analysis]
51 Wu Y, D’amato AR, Yan AM, Wang RQ, Ding X, Wang Y. Three-Dimensional Printing of Poly(glycerol sebacate) Acrylate Scaffolds via Digital Light Processing. ACS Appl Bio Mater 2020;3:7575-88. [DOI: 10.1021/acsabm.0c00804] [Cited by in Crossref: 2] [Cited by in F6Publishing: 1] [Article Influence: 1.0] [Reference Citation Analysis]
52 Kim S, Kim DH, Kim W, Cho YT, Fang NX. Additive Manufacturing of Functional Microarchitected Reactors for Energy, Environmental, and Biological Applications. Int J of Precis Eng and Manuf -Green Tech 2021;8:303-26. [DOI: 10.1007/s40684-020-00277-5] [Cited by in Crossref: 9] [Article Influence: 4.5] [Reference Citation Analysis]
53 Qian H, Lei T, Lei P, Hu Y. Additively Manufactured Tantalum Implants for Repairing Bone Defects: A Systematic Review. Tissue Eng Part B Rev 2021;27:166-80. [PMID: 32799765 DOI: 10.1089/ten.TEB.2020.0134] [Cited by in Crossref: 5] [Cited by in F6Publishing: 3] [Article Influence: 2.5] [Reference Citation Analysis]
54 Sakai S, Yoshii A, Sakurai S, Horii K, Nagasuna O. Silk fibroin nanofibers: a promising ink additive for extrusion three-dimensional bioprinting. Mater Today Bio 2020;8:100078. [PMID: 33083780 DOI: 10.1016/j.mtbio.2020.100078] [Cited by in Crossref: 5] [Cited by in F6Publishing: 5] [Article Influence: 2.5] [Reference Citation Analysis]
55 Rey F, Barzaghini B, Nardini A, Bordoni M, Zuccotti GV, Cereda C, Raimondi MT, Carelli S. Advances in Tissue Engineering and Innovative Fabrication Techniques for 3-D-Structures: Translational Applications in Neurodegenerative Diseases. Cells 2020;9:E1636. [PMID: 32646008 DOI: 10.3390/cells9071636] [Cited by in Crossref: 11] [Cited by in F6Publishing: 10] [Article Influence: 5.5] [Reference Citation Analysis]
56 Robinson TM, Talebian S, Foroughi J, Yue Z, Fay CD, Wallace GG. Fabrication of Aligned Biomimetic Gellan Gum-Chitosan Microstructures through 3D Printed Microfluidic Channels and Multiple In Situ Cross-Linking Mechanisms. ACS Biomater Sci Eng 2020;6:3638-48. [PMID: 33463177 DOI: 10.1021/acsbiomaterials.0c00260] [Cited by in Crossref: 4] [Cited by in F6Publishing: 1] [Article Influence: 2.0] [Reference Citation Analysis]
57 Elder B, Neupane R, Tokita E, Ghosh U, Hales S, Kong YL. Nanomaterial Patterning in 3D Printing. Adv Mater 2020;32:e1907142. [PMID: 32129917 DOI: 10.1002/adma.201907142] [Cited by in Crossref: 71] [Cited by in F6Publishing: 62] [Article Influence: 35.5] [Reference Citation Analysis]
58 Kühn S, Sievers J, Stoppa A, Träber N, Zimmermann R, Welzel PB, Werner C. Cell‐Instructive Multiphasic Gel‐in‐Gel Materials. Adv Funct Mater 2020;30:1908857. [DOI: 10.1002/adfm.201908857] [Cited by in Crossref: 14] [Cited by in F6Publishing: 9] [Article Influence: 7.0] [Reference Citation Analysis]
59 Hales S, Tokita E, Neupane R, Ghosh U, Elder B, Wirthlin D, Kong YL. 3D printed nanomaterial-based electronic, biomedical, and bioelectronic devices. Nanotechnology 2020;31:172001. [PMID: 31805540 DOI: 10.1088/1361-6528/ab5f29] [Cited by in Crossref: 16] [Cited by in F6Publishing: 9] [Article Influence: 5.3] [Reference Citation Analysis]
60 Guzzi EA, Bovone G, Tibbitt MW. Universal Nanocarrier Ink Platform for Biomaterials Additive Manufacturing. Small 2019;15:1905421. [DOI: 10.1002/smll.201905421] [Cited by in Crossref: 13] [Cited by in F6Publishing: 11] [Article Influence: 4.3] [Reference Citation Analysis]